

Clean Storm 20220144, Cold Water Electric Pressure Washer 3000 PSI 4 GPM 7.5 HP 230V 1 Phase Heavy Steel Cart Commercial Cleaning
Description
Delivering 3000 PSI at 4 GPM, the Clean Storm 20220144 Cold Water Electric Pressure Washer provides heavy-duty commercial cleaning power driven by a 7.5 HP, 230V 1-phase motor. Built onto a rugged, industrial-coated heavy tube steel cart with dual 10-inch tires, this portable unit is engineered for demanding daily washdown operations. The totally enclosed motor features integrated thermal overload protection and drives an industrial triplex plunger pump outfitted with durable ceramic plungers and corrosion-resistant stainless steel valves. Complete with a pressure unloader valve, secondary pop-off safety valve, and low-pressure chemical injection activated via a dedicated detergent nozzle, this unit includes a 50-foot by 3/8-inch high-pressure hose and a 10-foot power cord for immediate deployment in commercial and industrial facilities.
Features
- Heavy-Duty Tube Steel Cart Frame: Constructed from reinforced tubular steel finished with a corrosion-resistant industrial protective coating and fitted with two 10-inch pneumatic-style tires for smooth jobsite mobility.
- Industrial 7.5 HP Electric Motor: Totally enclosed 230-volt, 34-amp, single-phase motor equipped with built-in thermal overload protection to prevent overheating during extended operation.
- Commercial Triplex Plunger Pump: Engineered with high-density ceramic plungers and stainless steel valves to maximize wear resistance, pressure stability, and service life.
- Dual-Stage Pressure & Thermal Protection: Protected by a primary unloader valve, a secondary pop-off relief valve, and a mechanical thermal relief valve rated up to 140° F inlet water temperature.
- Low-Pressure Chemical Injection System: Integrated downstream detergent injector draws concentrated liquid cleaning agents automatically when switching to the low-pressure soap nozzle.
- Complete Hose & Power Package: Supplied ready for connection with a 50-foot by 3/8-inch high-pressure discharge hose and a 10-foot electrical power cord.
Applications
- Commercial fleet washing, heavy trucking depots, and municipal transit maintenance bays
- Construction equipment, earthmoving machinery, and agricultural implement washdown
- Industrial manufacturing floors, warehouse loading docks, and concrete surface preparation
- Food processing facilities, commercial kitchens, and indoor wash bays requiring zero exhaust emissions
- Property management, exterior building maintenance, and hardscape degreasing
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20220144 |
| Water Type |
Cold Water |
| Operating Pressure |
3000 PSI |
| Flow Rate |
4.0 GPM |
| Motor Horsepower |
7.5 HP (Totally Enclosed, Thermal Overload Protected) |
| Electrical Requirements |
230 Volts, 34 Amps, 1 Phase |
| Pump Design |
Industrial Triplex Plunger Pump (Ceramic Plungers, Stainless Steel Valves) |
| Pressure & Thermal Protection |
Unloader Valve, Secondary Pop-Off Valve, Mechanical Thermal Protection |
| Max Pump Inlet Water Temp |
140° F |
| Chemical Injection |
Low-Pressure Downstream Injection (Nozzle Activated) |
| Mounting & Frame |
Heavy Tube Steel Cart with Industrial Coating and Two 10" Tires |
| High-Pressure Hose |
50' x 3/8" (Standard 3/8" Quick-Connect / NPT Fittings) |
| Power Cord Length |
10' |
| Product Dimensions (L x W x H) |
37" x 23.5" x 36" |
| Shipping Weight |
265 lbs |
Cross-Reference SKUs
| 20220144 |
| CS-20220144 |
| CS20220144 |
| CLEANSTORM-20220144 |
| CLEANSTORM20220144 |
| 2022-0144 |
Tips and Additional Information
Pre-Installation Inspection & Oil Check: Before energizing the 230V circuit, inspect the triplex pump crankcase sight glass to verify proper oil levels and confirm the shipping breather plug has been replaced with the vented operating dipstick. Flush the water supply line thoroughly before attaching it to the pump inlet to prevent debris from scoring the ceramic plungers or fouling the stainless steel check valves.
Thread Sealing & Connection Alignment: Apply PTFE thread seal tape or high-pressure liquid thread sealant to all rigid NPT fittings on the discharge side, ensuring clean, straight thread engagement to prevent cross-threading under 3000 PSI loads. Do not apply thread tape to O-ring boss or swivel-nut quick-connect couplings, as those rely on elastomeric seals rather than thread interference.
Swivel Mechanics & Hose Handling: If pairing this unit with a high-pressure spray gun or hose reel, ensure a high-pressure live swivel rated for at least 3000 PSI is installed at the gun inlet to prevent hose kinking and premature wire-braid fatigue during operation. Always purge trapped air from the pump and 50-foot hose by squeezing the trigger gun with the water supply on before starting the 7.5 HP electric motor.
Frequently Asked Questions
Q: What electrical circuit is required to run the Clean Storm 20220144 pressure washer?
This unit requires a dedicated 230-volt, single-phase electrical supply capable of supporting a 34-amp running load. Consult a licensed electrician to ensure proper breaker sizing, wire gauge, and receptacle compatibility for the 10-foot power cord.
Q: How is the chemical injection system activated on this model?
The low-pressure chemical injector operates via Venturi suction and is activated automatically when you install the low-pressure black detergent nozzle onto the wand. High-pressure wash nozzles create backpressure that closes the injector check valve for clear water rinsing.
Q: Can hot water be fed into the inlet of this cold water pressure washer?
The triplex pump is rated for a maximum inlet water temperature of 140° F. Exceeding 140° F will trigger the mechanical thermal protection and can permanently damage the pump seals and ceramic plungers.
Warranty & Safety Information
Warranty Coverage & Void Conditions: Covered against manufacturer defects in materials and workmanship under standard commercial use guidelines. Warranty coverage is voided if the unit is operated without an adequate water supply (dry running), exposed to freezing temperatures without proper antifreeze winterization, supplied with water exceeding 140° F, wired to improper voltage/amperage, or modified by tampering with the factory-set unloader or secondary pop-off relief valves.
Operating Limits & Safety Hazards: Never exceed the 3000 PSI maximum operating pressure or 140° F inlet temperature rating. High-pressure water streams at 3000 PSI can cause severe fluid injection injuries; never point the spray wand at people, pets, or electrical equipment. Always wear ANSI-approved eye protection, slip-resistant footwear, and hearing protection, and ensure the 230V circuit is properly grounded to prevent electrical shock.
|