

Clean Storm 20220162, Gas Skid Cold Water Pressure Washer 4000 PSI 5.5 GPM Honda 688cc Steel Frame Commercial Cleaning
Description
The Clean Storm 20220162 Skid Mounted Cold Water Pressure Washer delivers 4000 PSI at 5.5 GPM via an industrial Honda 688cc gas engine for mobile commercial and industrial cleaning. Engineered to fit seamlessly into the side door of a work van, the bed of a pickup truck, or onto a utility trailer, this heavy-duty skid unit connects directly to a standard garden hose or onboard fresh water tank. Built around an industrial coated tube and plate steel frame, it features a commercial triplex plunger pump with wear-resistant ceramic plungers and corrosion-resistant stainless steel valves. An integrated unloader valve recirculates bypass water back to the fresh water tank to keep the pump cool during trigger-off intervals, while a secondary pressure pop-off valve protects the system against over-pressurization.
Features
- Industrial Honda 688cc Gas Engine: Commercial-grade twin-cylinder powerplant paired with a 5-gallon fuel tank for extended runtime on remote job sites.
- Triplex Plunger Pump Construction: Equipped with solid ceramic plungers and stainless steel valves for superior heat dissipation, chemical resistance, and extended service life.
- Bypass Recirculation & Thermal Protection: Mechanical thermal protection and an unloader valve route bypass water back to the fresh water tank to prevent pump overheating.
- Dual Over-Pressure Safety: System is safeguarded by a primary adjustable unloader valve and a secondary mechanical pressure pop-off relief valve.
- Industrial Coated Steel Skid Frame: Constructed from heavy-gauge tube and plate steel with a protective industrial coating to resist corrosion, vibration, and job-site impact.
- Complete Spray & Detergent Assembly: Includes a 50' x 3/8" high-pressure hose, heavy-duty trigger gun and wand, low-pressure chemical injector, and quick-change 0°, 15°, 25°, 40°, and detergent nozzles.
Applications
- Mobile commercial pressure washing rigs mounted inside cargo vans, pickup truck beds, or open utility trailers
- Heavy equipment, fleet vehicle, agricultural machinery, and construction site decontamination
- Industrial concrete, asphalt, warehouse floor, and loading dock surface restoration
- Municipal sanitation, graffiti removal, and commercial building exterior maintenance
- Remote water-fed operations utilizing onboard fresh water tanks or standard residential/commercial garden hose hookups
Specifications
| Brand |
Clean Storm |
| Part Number / SKU |
20220162 |
| Water Temperature Type |
Cold Water |
| Mounting Configuration |
Skid Mount (Van, Truck Bed, or Trailer) |
| Operating Pressure |
4000 PSI |
| Flow Rate |
5.5 GPM (20.8 LPM) |
| Engine Manufacturer & Displacement |
Honda 688cc Gas Engine |
| Fuel Tank Capacity |
5 Gallons |
| Pump Design & Materials |
Triplex Plunger Pump with Ceramic Plungers & Stainless Steel Valves |
| Pump Thermal & Pressure Protection |
Mechanical Thermal Protection, Unloader Valve, Secondary Pressure Pop-Off |
| Max Pump Inlet Water Temperature |
160° F |
| Frame Material & Finish |
Industrial Coated Tube and Plate Steel |
| High-Pressure Hose Dimensions |
50' Length x 3/8" Diameter |
| Included Spray Nozzles |
Quick-Change 0°, 15°, 25°, 40°, and Chemical/Detergent Nozzles |
| Water Supply Connection |
Standard Garden Hose Thread (GHT) / Fresh Water Tank Recirculation |
| Battery Requirement |
Group 24 12V Battery (Not Included) |
| Overall Dimensions (L x W x H) |
84" x 60" x 58" |
| Shipping Weight |
1,450 lbs |
Cross-Reference SKUs
| 20220162 |
| CS-20220162 |
| CS20220162 |
| CLEANSTORM-20220162 |
Tips and Additional Information
Pre-Installation & Mounting Alignment: Before operating, securely bolt the steel skid frame to your truck bed, van floor, or trailer deck using grade-8 hardware to prevent shifting under high torque. Verify that a Group 24 12V battery (sold separately at auto parts retailers) is properly installed and secured in the battery tray with clean, tight terminal connections. Thread Sealing & Hose Routing: Inspect all 3/8" quick-disconnect couplers, O-rings, and NPT threaded fittings prior to startup; apply PTFE thread sealant tape or pipe dope to any non-swivel male NPT threads as needed, and ensure the 50' discharge hose is free of kinks. Bypass & Water Supply Setup: Always route the unloader bypass line back to your fresh water supply tank rather than looping it directly to the pump inlet to maximize cooling efficiency. Never run the pump dry, and verify that inlet water temperature does not exceed 160° F.
Frequently Asked Questions
Q: Does this skid pressure washer include a battery for the electric start Honda 688cc engine?
A: No, a Group 24 12V automotive/marine starting battery is required and must be purchased separately from a local auto parts store.
Q: How does the pump stay cool when the trigger gun is released?
A: The system utilizes a bypass unloader valve that recirculates water back into the fresh water tank whenever the trigger gun is closed, preventing heat buildup inside the triplex pump head alongside mechanical thermal protection.
Q: Can I connect this unit directly to a standard residential or commercial water spigot?
A: Yes, the inlet is designed to hook directly to a standard garden hose water supply, provided the incoming flow rate meets or exceeds the pump's 5.5 GPM demand to prevent cavitation.
Q: How do I switch between high-pressure rinsing and applying soap or chemicals?
A: The heavy-duty trigger gun and wand use quick-change nozzles. Swap from a high-pressure nozzle (0°, 15°, 25°, or 40°) to the low-pressure detergent nozzle to activate the low-pressure chemical injection system.
Warranty & Safety Information
Warranty & Coverage Conditions: Covered by Clean Storm manufacturer warranty against defects in materials and workmanship, with the Honda 688cc engine covered under Honda's commercial engine warranty. Warranty coverage will be voided if the pump is operated without water (dry running), subjected to freezing temperatures without winterization, fed inlet water exceeding 160° F, or modified beyond factory pressure settings. Operating Limits & Safety Hazards: Do not exceed the maximum rated pressure of 4000 PSI or tamper with the factory-set secondary pressure pop-off valve. Always operate the gas engine outdoors or in a well-ventilated area to prevent fatal carbon monoxide accumulation. Wear ANSI-approved eye protection, hearing protection, and protective footwear during operation, and never direct the 4000 PSI high-pressure spray stream toward people, animals, electrical components, or fragile surfaces.
|

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Clean Storm 20220162, Gas Skid Cold Water Pressure Washer 4000 PSI 5.5 GPM Honda 688cc Steel Frame, Commercial Cleaning [20220162]
Click here for our full shipping policy. Specifications are subject to change without notice. Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products. Prop 65 Notice.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.
|