

Clean Storm 20220170, UV4040V Trailer Mounted Gas Pressure Washer 4000 PSI 4 GPM 130 Gallon Tank Industrial
Description
The Clean Storm 20220170 (Model UV4040V) is a heavy-duty trailer mounted cold water gas pressure washer engineered to deliver 4000 PSI at 4 GPM with a built-in 130-gallon fresh water tank for autonomous remote cleaning. Built for the toughest industrial environments, this road-ready unit combines a high-output 480 cc Briggs and Stratton gas engine with a durable triplex plunger pump featuring solid ceramic plungers and corrosion-resistant stainless steel valves. Complete with a 3500-pound rated axle, 15-inch wheels, DOT-compliant tail lights and turn signals, a manual hose reel with 100 feet of 3/8-inch high-pressure hose, and quick-change spray nozzles, it provides a self-contained mobile washing station capable of tackling heavy grime where municipal water hookups are unavailable.
Features
- High-Performance Powertrain: Equipped with an industrial-grade 480 cc Briggs and Stratton gas engine paired with a 9-quart fuel tank for extended continuous operation.
- Industrial Triplex Plunger Pump: Engineered with wear-resistant ceramic plungers and stainless steel valves to withstand high-pressure cycles up to 4000 PSI (276 Bar).
- Self-Contained Water Supply: Integrated 130-gallon fresh water tank enables mobile pressure washing in remote locations without direct water access.
- Comprehensive System Protection: Outfitted with an unloader valve, secondary pressure pop-off relief valve, and mechanical pump thermal protection to prevent overheating and over-pressurization.
- Low-Pressure Chemical Injection: Built-in downstream chemical injector allows seamless application of detergents and degreasers.
- Road-Ready Heavy-Duty Trailer: Constructed with a 3500# capacity axle, 15-inch wheels, tail lights, and turn signals for safe highway and jobsite towing.
- Complete Spray & Hose Package: Includes a manual hose reel, 100' x 3/8" high-pressure hose, heavy-duty trigger gun, and quick-connect 0°, 15°, 25°, and 40° nozzles.
Applications
- Commercial Fleet & Heavy Equipment Washing: Ideal for cleaning semi-trucks, construction machinery, agricultural tractors, and municipal vehicles on-site.
- Construction & Industrial Sites: Removes caked mud, concrete residue, grease, and industrial buildup where fixed water lines do not exist.
- Property Maintenance & Exterior Restoration: Suited for large-scale concrete flatwork, parking garages, brick facades, and commercial loading docks.
- Remote Agricultural & Oilfield Operations: Provides reliable mobile sanitation and equipment degreasing in off-grid locations.
Specifications
| Brand |
Clean Storm |
| Model Number |
UV4040V |
| Part Number / SKU |
20220170 |
| Water Type |
Cold Water |
| Power Source |
Gas Engine |
| Engine Manufacturer & Displacement |
Briggs and Stratton 480 cc |
| Engine Fuel Tank Capacity |
9 Quarts |
| Operating Pressure |
4000 PSI / 276 Bar |
| Flow Rate |
4 GPM / 15.2 LPM |
| Pump Type & Internals |
Triplex Plunger Pump with Ceramic Plungers & Stainless Steel Valves |
| Pump Thermal Protection |
Mechanical |
| Max Pump Inlet Water Temperature |
160° F |
| Water Tank Capacity |
130 US Gallons |
| Mounting Type |
Road-Ready Trailer (3500# Axle, 15" Wheels, Tail Lights & Turn Signals) |
| Hose Reel Type |
Manual |
| Hose Dimensions & Connections |
100' x 3/8" High-Pressure Hose with Quick-Change Nozzles (0°, 15°, 25°, 40°) |
| Overall Product Dimensions |
136" L x 74" W x 60" H |
| Shipping Weight |
900 lbs |
| Battery Requirement |
Group 24 12V Battery (Not Included) |
Cross-Reference SKUs
| 20220170 |
| UV4040V |
| CS-20220170 |
| CS-UV4040V |
| CSUV4040V |
| Clean Storm 20220170 |
| Clean Storm UV4040V |
Tips and Additional Information
Pre-Operation & Battery Setup: This unit requires a standard Group 24 battery (not included, readily available at local auto parts stores) for electric start functionality. Before starting the engine, verify engine crankcase oil and pump oil levels, ensure the 130-gallon supply tank valve is fully open, and purge all air from the pump and 100' x 3/8" hose by squeezing the trigger gun until a steady stream of water exits the wand.
Fittings, Alignment & Hose Reel Operation: Always inspect 3/8" quick-connect couplers, O-rings, and threaded NPT fittings for debris or wear prior to pressurizing the system. Apply high-pressure thread sealant (PTFE tape or anaerobic sealant) to any non-swivel male NPT threads during maintenance, ensuring straight alignment to prevent cross-threading. Because the unit features a manual hose reel, unspool the entire length of hose needed before engaging high pressure to avoid binding or hose jacket abrasion.
Payment & Ordering Notice: Due to equipment value and freight logistics, payment for this unit is accepted by Wire Transfer only; credit card orders are not accepted.
Frequently Asked Questions
Q: Does this trailer pressure washer include a battery for the Briggs and Stratton engine?
No, a Group 24 battery is not included with the shipment. You can purchase a standard Group 24 12-volt automotive or marine battery at any local auto parts store and install it into the battery box prior to initial startup.
Q: Can I feed hot water into the pump from an external source or heated tank?
This is a cold water pressure washer, and the maximum inlet water temperature rated for the triplex plunger pump is 160° F. Exceeding 160° F will damage the internal pump seals and void mechanical thermal protection limits.
Q: Is the trailer street-legal for highway towing right out of the box?
Yes, the trailer is built road-ready with a 3500# rated axle, 15" wheels, tail lights, and turn signals. Always verify trailer tire pressure, lug nut torque, safety chains, light wiring connection, and local DOT registration requirements before towing on public roadways, and never tow with a full 130-gallon tank unless your tow vehicle and hitch rating safely accommodate the additional 1,080+ lbs of water weight.
Q: How does the chemical injection system work on the UV4040V?
The unit is equipped with a downstream low-pressure chemical injector. To draw detergent, install a low-pressure soap nozzle or adjust the pressure down at the wand so the injector creates the vacuum needed to siphon chemical into the water stream.
Warranty & Safety Information
Warranty Coverage & Void Conditions: Covered under Clean Storm manufacturer warranty against defects in materials and workmanship, with the Briggs and Stratton engine warranted separately by the engine manufacturer. Warranty coverage will be voided if the pump is run dry without water supply, exposed to freezing temperatures without proper antifreeze winterization, supplied with inlet water exceeding 160° F, operated without proper engine/pump oil levels, or modified beyond factory pressure (4000 PSI / 276 Bar) and unloader settings.
Critical Safety Hazards & Operating Limits: High-pressure water streams at 4000 PSI can cause severe fluid injection injuries, lacerations, or blindness—never point the spray gun at people, pets, or electrical components, and always wear ANSI-approved eye protection, hearing protection, and protective footwear. Never exceed the maximum 4000 PSI operating pressure or 160° F inlet temperature. Operate the gas engine exclusively outdoors in well-ventilated areas to prevent fatal carbon monoxide poisoning, and never leave the machine running in bypass mode for extended periods without triggering the gun.
|