

Clean Storm 20220184, Stationary Natural Gas Fired Hot Water Pressure Washer 5.5 gpm 2500 psi 10 Hp 230V 1Ph
Description
Clean Storm Stationary Natural Gas Fired Hot Water Pressure Washer delivering 5.5 gpm and 2500 psi powered by a robust 10 Hp 230V 1Ph electric motor for heavy-duty industrial cleaning. Designed for stationary installation, this high-performance pressure washer features a forced-air natural gas burner system with a schedule 80 coil, stainless steel wrap, and adjustable thermostat reaching up to 195° F. Built on an industrial-coated steel tubing skid frame, it includes an industrial triplex plunger pump with ceramic plungers, thermal overload protection, low-pressure chemical injection, a heavy-duty trigger gun, a dual wand with a side handle valve, and a complete 50-foot hose assembly. Wire transfer payment only for this build.
Features
- Industrial totally enclosed motor with thermal overload protection for reliable continuous operation
- Triplex plunger pump equipped with ceramic plungers and stainless steel valves protected by an unloader valve and secondary pressure pop-off
- Forced-air natural gas burner technology featuring a schedule 80 coil with a stainless steel wrap
- Adjustable thermostat and temperature limit switch delivering a maximum temperature of 195° F
- Low-pressure chemical injection system optimized for concentrated liquid detergents and solutions
- Heavy-duty trigger gun and dual wand with side handle valve for seamless switching between high-pressure cleaning and detergent application
- Includes quick-change nozzle tips in 0, 15, 25, and 40 degree patterns alongside a 50-foot by 3/8-inch hose
Applications
- Stationary industrial cleaning bays and wash rack installations
- Heavy equipment maintenance and fleet washing facilities
- Manufacturing plant and industrial floor sanitation
- Agricultural and heavy machinery washdown operations
- Outdoor or properly vented indoor environments equipped with a 1-inch gas line and proper HVAC make-up air
Specifications
| Brand |
Clean Storm |
| Model Part Number |
20220184 |
| Water Type |
Hot |
| Powered By |
Electric Motor |
| Mounting Type |
Stationary Skid |
| Flow Rate |
5.5 GPM |
| Operating Pressure |
2500 PSI |
| Horsepower |
10 HP |
| Voltage / Amperage / Phase |
230V / 40A / 1-Phase |
| Heated By / Fuel Type |
Natural Gas |
| Max Temperature |
195° F |
| Max Pump Inlet Water Temp |
140° F |
| Pump Thermal Protection |
Mechanical |
| Hose Dimension |
50' x 3/8" |
| Power Cord Length |
10' |
| Burner Stack Dimension |
8" |
| Product Dimensions |
53" X 33" X 58" and 40" X 30" x 58" |
| Shipping Weight |
660 lbs |
| Payment Terms |
Wire Transfer Only |
Cross-Reference SKUs
| Clean Storm 20220184 |
| CS-20220184 |
| CS20220184 |
| 20220184 Stationary Natural Gas Pressure Washer |
| Clean Storm 5.5 GPM 2500 PSI Hot Water Pressure Washer |
Tips and Additional Information
Ensure proper thread sealing using rated pipe thread compound or thread tape suitable for natural gas connections on the 1-inch gas supply line. Verify that the unit is installed in an outdoor setting or connected to a properly engineered ventilation system with an 8-inch stack and adequate make-up air by consulting a local HVAC professional. Perform a thorough pre-install inspection of all electrical connections, 230V 40A supply requirements, and water inlet temperatures (maximum 140° F). For longer hose runs or complex pipeline systems exceeding 50 feet, the low-pressure chemical injector must be relocated within 50 feet of the trigger gun for optimal detergent draw.
Frequently Asked Questions
Q: What fuel source and gas line requirements are needed for this pressure washer?
This unit is designed for natural gas firing and must be connected to a dedicated 1-inch gas line. It requires proper ventilation and adequate make-up air, and should be installed by a qualified HVAC professional.
Q: Can credit cards be used to purchase this build?
No. Wire transfer payment only is accepted for this specific industrial build.
Q: How do I adjust the operating temperature of the water?
The burner system is controlled by an adjustable thermostat and a temperature limit switch, allowing you to regulate water temperatures up to a maximum of 195° F.
Warranty & Safety Information
This industrial equipment comes with manufacturer coverage against defects in materials and workmanship under normal stationary use and proper maintenance. Warranty is void if the unit is operated without proper ventilation, inadequate make-up air, improper electrical supply (deviation from 230V, 40A, 1-Phase specifications), or failure to maintain clean fuel and water inputs. All systems burning natural gas produce hazardous exhaust and must be operated outdoors or properly vented via an 8-inch stack. Observe maximum pressure limits of 2500 PSI and maximum inlet water temperatures of 140° F to prevent internal pump damage and safety hazards.
|