

Clean Storm 20220204, Honda Gas Skid Hot Water Pressure Washer 3000 PSI 4 GPM Electric Start
Description
Delivers 3000 PSI at 4 GPM of 195° F hot water for heavy-duty commercial degreasing, surface sanitation, and fleet washing across mobile truck, van, and trailer setups. Built around an 11.7 HP 389cc Honda single-cylinder industrial gas engine with electric start, this skid-mounted pressure washer combines a commercial triplex plunger pump with a diesel-fired Schedule 80 heating coil wrapped in stainless steel. Engineered for maximum portability and harsh field environments, the industrial-coated tubular frame houses an integrated wand and hose rack, a rust-free 9-gallon burner fuel tank, and a 6.9-quart engine fuel tank. Operators can transition seamlessly between high-pressure blasting and low-pressure chemical injection using the heavy-duty trigger gun and dual-wand side handle valve.
Features
- Industrial Honda Powertrain: 11.7 HP (389cc) single-cylinder Honda gas engine with electric start capability (requires standard Group 24 battery, sold separately) and a 6.9-quart onboard fuel tank.
- Commercial Triplex Plunger Pump: Equipped with wear-resistant ceramic plungers, stainless steel valves, mechanical thermal protection, an unloader valve, and a secondary pressure pop-off relief valve.
- High-Output Diesel Burner System: Features a heavy-duty Schedule 80 heating coil encased in a corrosion-resistant stainless steel wrap, fed by a rust-free 9-gallon diesel fuel tank and vented through an 8-inch burner stack.
- Precision Temperature Control: Adjustable thermostat and integrated temperature limit switch regulate water heating safely up to a maximum output of 195° F.
- Dual-Wand Detergent & Pressure Control: Heavy-duty trigger gun paired with a dual wand and side handle valve allows instant switching between high-pressure rinsing and low-pressure chemical injection.
- Rugged Skid-Mount Frame: Constructed from industrial-coated steel tubing with an integrated wand and hose rack for secure transport across trucks, vans, and open or enclosed trailers.
- Complete Hose & Nozzle Kit: Includes a 50-foot x 3/8-inch high-pressure hose and four quick-change spray nozzles (0°, 15°, 25°, and 40°) for versatile surface coverage.
Applications
- Mobile commercial pressure washing rigs mounted in pickup truck beds, cargo vans, and utility trailers.
- Heavy equipment, construction machinery, and agricultural fleet degreasing where hot water cuts through thick grease and hydraulic oil.
- Industrial warehouse floors, concrete loading docks, drive-thrus, and commercial kitchen exhaust or dumpster pad sanitation.
- Municipal maintenance, marine hull cleaning, and oilfield facility washdowns requiring self-contained gas and diesel operation without external electrical hookups.
Specifications
| Brand |
Clean Storm |
| Model Number |
20220204 |
| Mounting Type |
Skid Mount (Tubular Industrial Coated Frame) |
| Water Output Type |
Hot Water (Up to 195° F Max Output) |
| Operating Pressure |
3000 PSI (207 Bar) |
| Flow Rate |
4.0 GPM (15.2 LPM) |
| Engine Manufacturer & Displacement |
Honda Single Cylinder, 11.7 HP (389cc) |
| Starting System |
Electric Start (Requires Group 24 12V Battery, Not Included) |
| Engine Fuel Type & Capacity |
Gasoline, 6.9 Quarts |
| Pump Design & Materials |
Triplex Plunger Pump with Ceramic Plungers & Stainless Steel Valves |
| Pump Thermal & Pressure Protection |
Mechanical Thermal Relief, Unloader Valve & Secondary Pop-Off Valve |
| Max Pump Inlet Water Temp |
140° F |
| Burner Fuel Type & Tank Capacity |
Diesel Fuel, 9 Gallons (Rust-Free Tank) |
| Heating Coil Construction |
Schedule 80 Coil with Stainless Steel Wrap |
| Temperature Controls |
Adjustable Thermostat & High-Temperature Limit Switch |
| Burner Stack Dimension |
8 Inches |
| High-Pressure Hose & Fittings |
50 ft. x 3/8 in. Hose with Quick-Connect Nozzle Couplers (0°, 15°, 25°, 40°) |
| Overall Dimensions (L x W x H) |
42 in. x 35 in. x 45 in. |
| Shipping Weight |
500 lbs. |
Cross-Reference SKUs
| 20220204 |
| CS-20220204 |
| CS20220204 |
| CLEANSTORM-20220204 |
| SB-20220204 |
| 2022-02-04 |
Tips and Additional Information
Pre-Install & Startup Inspection: Before starting the unit, install a standard Group 24 12V automotive or marine battery (not included) into the battery box, ensuring clean, tight terminal connections with correct polarity. Verify crankcase oil levels in both the Honda engine and the triplex plunger pump, and confirm all shipping plugs have been replaced with vented oil dipsticks where applicable.
Thread Sealing & Connection Alignment: Apply high-temperature PTFE thread sealant tape or pipe dope rated for 3000+ PSI to all tapered NPT pipe fittings during assembly. Always align 3/8-inch quick-connect couplers straight before locking the collar to prevent O-ring pinching, uneven wear, or high-pressure leaks under thermal expansion.
Hose Routing & Swivel Mechanics: Uncoil the entire 50-foot x 3/8-inch high-pressure hose prior to pressurizing the system to prevent kinking and premature jacket abrasion. If adding an aftermarket high-pressure ball-bearing swivel between the hose and heavy-duty trigger gun, select a live-swivel rated for at least 4000 PSI and 250° F to eliminate hose twisting during continuous wand operation.
Chemical Injection & Water Supply: Ensure your incoming water supply delivers at least 4.5 to 5.0 GPM at a maximum inlet temperature of 140° F to prevent pump cavitation. To draw detergent via the low-pressure chemical injector, open the side handle valve on the dual wand to drop line pressure and activate Venturi suction.
Frequently Asked Questions
Q: What battery is required for the electric start system on the Clean Storm 20220204?
This unit requires a standard 12-volt Group 24 battery, which is not included with the skid washer and can be sourced from any local auto parts store. Ensure the battery has sufficient cold cranking amps (CCA) to reliably turn over the 389cc Honda engine and power the burner ignition system.
Q: How do I switch from high-pressure hot water rinsing to detergent application?
The included heavy-duty trigger gun is paired with a dual-wand assembly featuring a side handle valve. Turning the side handle valve diverts water flow and lowers system pressure, automatically engaging the low-pressure chemical injector without needing to swap nozzles.
Q: Can I feed preheated water into this pressure washer to reach higher output temperatures?
You can supply warm inlet water up to a maximum pump inlet temperature of 140° F. Exceeding 140° F at the pump inlet will damage the triplex pump seals and trigger the mechanical thermal protection. The diesel burner will heat incoming water up to the 195° F limit switch ceiling.
Q: What ventilation clearance is required when mounting this skid inside an enclosed van or trailer?
Because this machine utilizes both a 389cc gasoline engine and a diesel-fired burner with an 8-inch exhaust stack, enclosed van or trailer installations must incorporate proper roof venting for the 8-inch burner stack and adequate cross-ventilation to evacuate carbon monoxide and excess heat.
Warranty & Safety Information
Warranty Coverage & Void Conditions: Covered under manufacturer limited warranty for defects in materials and workmanship, alongside Honda commercial engine warranty coverage. Warranty protection will be voided by running the triplex pump dry (cavitation), exceeding the 140° F maximum pump inlet temperature, operating without clean fuel/water filters, freezing water inside the pump or Schedule 80 heating coil, or tampering with the factory-set unloader valve, secondary pressure pop-off valve, or 195° F temperature limit switch.
Pressure & Temperature Operating Limits: Do not exceed the rated operating pressure of 3000 PSI (207 Bar), 4.0 GPM flow rate, or 195° F maximum discharge temperature. Always verify that replacement hoses, trigger guns, and surface cleaners are rated above 3000 PSI and 200° F.
Critical Safety Hazards:
- Carbon Monoxide & Exhaust Hazard: Never operate the gasoline engine or diesel burner in an unventilated indoor space. Exhaust gases contain lethal carbon monoxide.
- High-Pressure Injection & Scalding Risk: 3000 PSI water streams at 195° F can cause severe fluid injection injuries and third-degree thermal burns. Never point the wand at people, animals, or fragile surfaces, and wear appropriate eye, hand, and foot protection.
- Fire & Refueling Safety: Shut down both the engine and diesel burner and allow the stainless-steel-wrapped coil and 8-inch stack to cool before refueling either the 6.9-quart gasoline tank or the 9-gallon diesel tank. Never burn gasoline, crankcase oil, or volatile solvents in the diesel burner.
|