

Clean Storm 20220315, Hot Water Pressure Washer 3000 PSI 3 GPM Electric Start Honda Gas Engine Diesel Burner
Description
The Clean Storm 20220315 portable hot water pressure washer delivers 3000 PSI at 3 GPM using an electric start Honda gas engine and diesel-fired burner for heavy industrial cleaning. Engineered for mobility across rugged job sites, this wheeled cart unit mounts on a heavy-duty frame equipped with an integrated hose rack, wand holder, and 13-inch wheels to navigate uneven terrain. It pairs an industrial 7 HP Honda gas engine with a triplex plunger pump featuring ceramic plungers and stainless steel valves for extended operational life. The diesel burner assembly includes a rust-free 5-gallon fuel tank and a schedule 80 heating coil protected by a stainless steel wrap, reaching water temperatures up to 195° F under the control of an adjustable thermostat and high-temperature limit switch. Included accessories feature a 50-foot by 3/8-inch high-pressure hose, a heavy-duty trigger gun, a dual wand with a side handle valve for seamless switching between high-pressure rinsing and low-pressure chemical injection, and four quick-change spray nozzles.
Features
- Industrial 7 HP 200cc electric start Honda gas engine provides reliable ignition and consistent power output (requires Group 24 battery, sold separately).
- Commercial triplex plunger pump built with wear-resistant ceramic plungers, stainless steel valves, and mechanical thermal protection.
- Diesel-heated schedule 80 steel heating coil encased in a corrosion-resistant stainless steel wrap heats discharge water up to 195° F.
- Adjustable thermostat paired with an automatic temperature limit switch, unloader valve, and secondary pressure pop-off valve for safe thermal and pressure regulation.
- Rust-free 5-gallon diesel burner fuel tank and 6.9-quart gasoline engine tank allow extended continuous runtimes without frequent refueling.
- Heavy-duty portable steel cart frame outfitted with 13-inch pneumatic-style wheels, built-in hose rack, and dedicated wand holder.
- Dual-lance wand assembly with side handle valve enables instant switching between high-pressure blasting and low-pressure downstream detergent application.
- Includes a 50-foot x 3/8-inch high-pressure hose, heavy-duty trigger gun, and quick-connect 0°, 15°, 25°, and 40° spray nozzles.
Applications
- Heavy equipment, fleet vehicle, and semi-truck degreasing in transportation and logistics yards.
- Industrial plant maintenance, manufacturing floor sanitation, and machinery washdowns.
- Agricultural machinery, barn, and livestock facility cleaning where hot water sanitizing is required.
- Construction site mud, grease, and concrete residue removal on remote locations without grid power.
- Municipal exterior maintenance, parking deck oil stain extraction, and commercial property restoration.
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20220315 |
| Water Output Type |
Hot Water |
| Operating Pressure |
3000 PSI / 207 Bar (2700 PSI Nominal Rating) |
| Flow Rate |
3.0 GPM / 11.4 LPM |
| Engine |
Honda 7 HP / 200 cc Electric Start Gas Engine |
| Engine Fuel Capacity |
6.9 Quarts (Gasoline) |
| Pump Type |
Triplex Plunger Pump with Ceramic Plungers & Stainless Steel Valves |
| Pump Thermal Protection |
Mechanical Thermal Relief |
| Max Pump Inlet Water Temp |
140° F |
| Max Outlet Water Temp |
195° F |
| Burner Fuel Type |
Diesel Fuel |
| Burner Fuel Tank Capacity |
5 Gallons (Rust-Free Tank) |
| Heating Coil |
Schedule 80 Pipe with Stainless Steel Wrap |
| Burner Stack Dimension |
8 Inches |
| Hose Dimension & Connection |
50' x 3/8" High-Pressure Hose with Quick-Connect Couplers |
| Nozzle Connections |
1/4" Quick-Change (0°, 15°, 25°, 40°) |
| Mounting & Mobility |
Wheeled Cart Frame with 13" Wheels, Hose Rack, & Wand Holder |
| Overall Dimensions |
52" L x 32" W x 49" H |
| Shipping Weight |
340 lbs |
| Battery Requirement |
12V Group 24 Automotive/Marine Battery (Not Included) |
Cross-Reference SKUs
| 20220315 |
| CS-20220315 |
| CS20220315 |
| CLEANSTORM-20220315 |
| CLEANSTORM20220315 |
Tips and Additional Information
Pre-Operation Battery & Fluid Inspection: Before initial startup, install a fully charged 12V Group 24 battery (not included) using proper polarity. Verify engine crankcase oil level, triplex pump oil level (remove shipping plug and install vented dipstick if applicable), gasoline tank fill, and clean #1 or #2 diesel fuel in the 5-gallon burner tank.
Thread Sealing & Fitting Alignment: Inspect all 3/8-inch high-pressure hose quick-connect couplers, O-rings, and NPT threaded fittings prior to pressurizing the system. Apply high-temperature PTFE thread tape or liquid pipe sealant to non-swivel NPT threads, ensuring straight alignment to avoid cross-threading brass and stainless steel ports. Confirm the trigger gun swivel moves freely without binding before squeezing the trigger.
Burner & Water Supply Best Practices: Always establish full water flow through the pump and coil before igniting the diesel burner. Never allow incoming supply water to exceed 140° F, as excessive inlet temperatures will damage pump seals and trigger mechanical thermal protection. To apply soap, open the dual-wand side handle valve to drop line pressure and activate the low-pressure chemical injector.
Frequently Asked Questions
Q: Does this pressure washer include a battery for the electric start engine?
No, the 12V Group 24 battery required to operate the electric starter and burner ignition system is not included and can be purchased at any local auto parts store.
Q: How do I switch between high-pressure hot water washing and detergent application?
The included dual wand features an integrated side handle valve. Turning the side handle valve opens the secondary low-pressure barrel, reducing backpressure so the downstream chemical injector automatically draws detergent into the water stream.
Q: What type of fuel does the heating burner use, and what is the maximum water temperature?
The burner runs on diesel fuel stored in the 5-gallon rust-free tank and heats water through a schedule 80 coil up to a maximum outlet temperature of 195° F, regulated by an adjustable thermostat and high-limit safety switch.
Q: Can I feed preheated water into this machine?
Yes, provided the incoming supply water temperature does not exceed the maximum pump inlet limit of 140° F.
Warranty & Safety Information
Warranty Coverage & Void Conditions: Covered under the manufacturer's limited warranty against defects in materials and workmanship (Honda engine warranted separately through authorized Honda service centers). Warranty coverage is voided by running the pump dry, exceeding the 140° F maximum inlet water temperature, freeze damage from improper winterization, using contaminated fuel or unapproved harsh chemicals through the pump, or tampering with the factory-set unloader and pressure pop-off relief valves.
Pressure, Temperature & Exhaust Hazards: Never exceed the 3000 PSI operating pressure or 195° F maximum discharge temperature. High-pressure fluid injection can cause severe personal injury—never point the spray wand at people, animals, or electrical equipment, and always engage the trigger safety lock when not actively spraying. Because this unit utilizes both a gasoline engine and a diesel-fired burner with an 8-inch exhaust stack, operate strictly outdoors or in thoroughly ventilated areas to prevent lethal carbon monoxide accumulation, and avoid contact with hot exhaust stacks, coils, and discharge fittings.
|