

Clean Storm 20221021, Pressure Washing Lance Quick Disconnect 1-4 Inch FIP X 1-4 Inch Flow Through Socket Coupler Brass 4000 PSI
Description
The Clean Storm 20221021 Pressure Washing Lance Quick Disconnect Coupler connects 1/4-inch female pipe threads to 1/4-inch flow-through quick-connect plugs at up to 4000 PSI. Engineered from solid machined brass, this high-pressure socket coupler ensures rapid, leak-free attachment of spray nozzles, foam cannons, and cleaning wands in commercial and residential pressure washing systems. Its full-bore flow-through internal design eliminates restrictive check valves, maximizing water flow and maintaining peak cleaning pressure across demanding hot and cold water applications.
Features
- Solid Machined Brass Construction: Resists rust, chemical corrosion, and mechanical wear in harsh outdoor and commercial cleaning environments.
- Unrestricted Flow-Through Design: Valveless internal bore maximizes water volume and minimizes pressure drop between the wand and spray nozzle.
- 4000 PSI High-Pressure Rating: Built to safely contain extreme hydraulic forces generated by commercial cold and hot water pressure washers.
- Spring-Loaded Ball-Lock Sleeve: Knurled brass release collar provides a positive grip for rapid, single-handed accessory changes even with wet or gloved hands.
- Precision 1/4-Inch FIP Threads: Deeply cut Female Iron Pipe (NPT) threads ensure a tight, vibration-resistant mechanical seal onto standard pressure washer lances.
Applications
- Commercial and residential gas or electric pressure washer spray lances and wands up to 4000 PSI.
- Quick-change attachment of high-pressure spray nozzles, rotary turbo nozzles, and foam cannons.
- Hot and cold water pressure washing rigs, trailer skids, and truck-mounted wash systems.
- Fleet washing, concrete surface cleaning, building exterior maintenance, and agricultural equipment sanitation.
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20221021 |
| OEM Cross-Reference Numbers |
DS2001, 86035 |
| Coupler Type |
Flow-Through Quick Disconnect Socket (Valveless) |
| Inlet Connection |
1/4 in. FIP (Female Iron Pipe / Female NPT) |
| Outlet Connection |
1/4 in. Female Quick Disconnect (QD) Socket |
| Body & Sleeve Material |
Solid Machined Brass |
| Finish |
Natural Machined Brass |
| Locking Mechanism |
Stainless Steel Ball-Lock with Spring-Loaded Collar |
| Swivel Mechanics |
Non-Live Static Connection (Not Rated for Continuous Rotation Under Pressure) |
| Maximum Pressure Rating |
4000 PSI |
| Maximum Operating Temperature |
212°F (100°C) |
Cross-Reference SKUs
| 20221021 |
| Clean Storm 20221021 |
| CS-20221021 |
| CS20221021 |
| DS2001 |
| DS-2001 |
| 86035 |
| 86-035 |
Tips and Additional Information
Thread Sealing: Always apply 2 to 3 wraps of high-density PTFE thread seal tape clockwise around the male NPT threads of your pressure washer lance before threading on the 1/4-inch FIP coupler. Avoid letting tape overhang the first thread to prevent debris from entering and clogging downstream spray nozzles.
Proper Alignment & Torque: Start threading the brass socket onto the steel or brass lance by hand to prevent cross-threading. Tighten 1.5 to 2 turns past hand-tight using a properly sized open-end wrench on the hex body—never wrench on the sliding release sleeve, and do not overtighten, as excessive torque can split female brass ports.
Live vs. Non-Live Operation: This fitting is a static quick-disconnect coupler, not a live rotary swivel. While accessories may rotate freely when the system is depressurized, high water pressure locks the internal O-ring against the plug; do not force continuous rotation during active spraying.
Pre-Installation Inspection: Before pressurizing the system, inspect the internal elastomeric O-ring for nicks, flattening, or dry rot, and verify that all stainless steel locking balls move freely inside the socket bore. Always pull back firmly on the inserted nozzle or plug after coupling to confirm the collar has fully snapped forward into the locked position.
Frequently Asked Questions
Q: Does this coupler shut off water flow when the nozzle is disconnected?
No. The Clean Storm 20221021 is a flow-through (valveless) socket coupler designed for the discharge end of a pressure washer wand. It allows unrestricted water flow and requires the trigger gun to be released and pressure relieved before disconnecting accessories.
Q: Will this 1/4-inch quick disconnect fit standard pressure washer spray tips and foam cannons?
Yes. It uses the industry-standard 1/4-inch quick-disconnect socket profile compatible with standard 1/4-inch male quick-connect nozzle tips, turbo nozzles, undercarriage cleaners, and foam cannon plugs rated up to 4000 PSI.
Q: Can I use this brass coupler with a hot water pressure washer?
Yes, the solid brass body and internal seals are compatible with both cold and hot water pressure washing systems up to 212°F (100°C), provided operating pressure does not exceed 4000 PSI.
Q: Why is my quick disconnect leaking around the inserted spray tip?
Leaks at the quick-connect joint are almost always caused by a worn, nicked, or debris-fouled internal O-ring inside the brass socket. Replacing the 1/4-inch internal O-ring restores a watertight seal.
Warranty & Safety Information
Warranty Coverage: Backed by a standard limited manufacturer warranty against defects in materials and workmanship under normal pressure washing use. Warranty coverage is void if the coupler is subjected to pressures exceeding 4000 PSI, temperatures above 212°F, incompatible corrosive chemicals, freezing water expansion, cross-threading, or mechanical damage from over-torquing.
Safety Hazards & Operating Limits: Never exceed the maximum rated working pressure of 4000 PSI or maximum temperature of 212°F. Always shut off the pressure washer, engage the spray gun trigger lock, and squeeze the trigger to bleed residual line pressure before connecting or disconnecting any quick-connect fitting. Failure to fully seat and lock the quick-disconnect collar before pulling the trigger can cause high-velocity projectile ejection of the nozzle, resulting in severe bodily injury or property damage. Always wear ANSI-approved eye protection and appropriate PPE during operation.
|