

Clean Storm 20221342, Wall Mounted Cold Electric Pressure Washer 1500 PSI 2GPM 3 HP 240V 20A Stainless Steel
Description
The Clean Storm 20221342 is a heavy-duty wall-mounted cold water electric pressure washer engineered for continuous commercial and industrial cleaning at 1500 PSI and 2.2 GPM. Constructed with a full corrosion-resistant stainless steel frame and protective cover, this 3 HP, 240-volt unit features a totally enclosed, thermal overload-protected industrial motor paired with a commercial triplex plunger pump equipped with ceramic plungers and stainless steel valves. Designed to save valuable floor space, the system utilizes a permanent wall-mounting plate that allows the unit frame to slide securely into place. Integrated onboard storage keeps the 50-foot hose, trigger gun, and Q-Meg quick-connect nozzles organized, while a dual chemical metering valve provides low-pressure downstream soap injection from two separate detergent concentrates.
Features
- Full stainless steel frame and protective cover engineered to withstand wet, corrosive, and washdown environments.
- Space-saving wall-mount design features a heavy-duty mounting bracket that bolts to reinforced walls, allowing the main chassis to slide securely into position.
- Industrial 3 HP electric motor is totally enclosed (TEFC) and equipped with thermal overload protection for extended duty cycles.
- Commercial-grade triplex plunger pump built with durable ceramic plungers, stainless steel valves, mechanical thermal relief protection, and an integrated pressure unloader valve.
- Dual chemical injector valve lets operators switch between two distinct liquid concentrate detergents and adjust dilution ratios with a single control knob.
- Integrated frame hooks hold the 50-foot high-pressure hose and trigger gun, while built-in cover grommets store the included 0°, 15°, 25°, and 40° Q-Meg nozzles.
- Includes a 35-foot power supply cord equipped with an inline Ground Fault Circuit Interrupter (GFCI) for operator electrical safety.
Applications
- Food and beverage processing plants, commercial kitchens, and sanitation washdown bays requiring stainless steel equipment.
- Automotive dealerships, fleet maintenance facilities, and detail bays for stationary vehicle washing.
- Manufacturing facilities, warehouses, and industrial workshops with limited floor space.
- Agricultural barns, dairy parlors, and veterinary clinics needing reliable cold water sanitizing and degreasing.
- Marine docks and coastal facilities exposed to high humidity and salt air corrosion.
Specifications
| Brand |
Clean Storm |
| Part Number |
20221342 |
| Machine Type |
Wall Mounted Cold Water Electric Pressure Washer |
| Frame Material |
Full Stainless Steel with Protective Cover |
| Operating Pressure |
1500 PSI (103.5 Bar) |
| Flow Rate |
2.2 GPM (8.4 LPM) |
| Motor Horsepower |
3 HP |
| Electrical Requirements |
240 Volt, 20 Amp, 1-Phase |
| Power Cord |
35 ft with Integrated GFCI |
| Pump Type |
Industrial Triplex Plunger Pump with Ceramic Plungers & Stainless Steel Valves |
| Pump Thermal Protection |
Mechanical Thermal Relief Valve |
| Maximum Inlet Water Temperature |
160°F |
| High-Pressure Hose |
50 ft x 3/8 in ID |
| Chemical Injection |
Low-Pressure Dual Chemical Metering Valve |
| Included Nozzles |
0°, 15°, 25°, 40° Q-Meg Tips and Low-Pressure Soap Tip |
| Overall Dimensions (L x W x H) |
23 in x 16 in x 31 in |
| Shipping Weight |
210 lbs |
Cross-Reference SKUs
| 20221342 |
| CS-20221342 |
| CS20221342 |
| CLEANSTORM-20221342 |
| CLEANSTORM20221342 |
Tips and Additional Information
Before mounting, verify that the wall structure is adequately reinforced with structural studs, masonry, or backing plates capable of supporting the 210 lb unit weight plus dynamic hose pull forces. Apply PTFE thread seal tape or high-pressure thread sealant to all non-swivel NPT pipe fittings during assembly, ensuring threads are clean and properly aligned to prevent cross-threading or high-pressure leaks. Note that standard trigger gun and hose connections are non-live unless upgraded with a live high-pressure swivel; always relieve residual line pressure by squeezing the trigger gun after shutting off the motor before disconnecting hoses or changing Q-Meg quick-connect nozzles. Prior to initial startup, check the pump crankcase oil level through the sight glass, confirm the shipping breather cap is installed, and purge air from the water supply line before energizing the 240V circuit.
Frequently Asked Questions
Q: How does the dual chemical injection system operate on this unit?
The Clean Storm 20221342 features a low-pressure downstream chemical injector controlled by a dual-port metering valve. Turn the selector knob to choose between two separate detergent containers and meter the soap concentration, then install the low-pressure soap nozzle onto the trigger gun wand to drop system pressure and draw chemical into the water stream.
Q: What electrical connection is required for the 240V 20A motor?
This unit requires a dedicated 240-volt, single-phase, 20-amp electrical circuit. It comes pre-wired with a 35-foot power cord featuring a built-in GFCI module to protect against ground faults in wet washdown environments.
Q: Can I feed warm or hot water into this cold water pressure washer?
While designed as a cold water pressure washer, the industrial triplex pump and mechanical thermal protection system can safely accept incoming feed water temperatures up to a maximum of 160°F. Exceeding 160°F will damage pump seals and void pump warranty coverage.
Q: How is the pressure washer secured to the wall?
Installation uses a two-piece mounting system. First, permanently bolt the heavy-duty wall bracket to a structurally reinforced wall, then slide the stainless steel machine frame onto the bracket plate.
Warranty & Safety Information
Covered under Clean Storm limited manufacturer warranty against defects in materials and workmanship on the stainless steel frame, electric motor, and triplex plunger pump. Warranty coverage is void if the unit is operated without an adequate water supply (dry running), exposed to freezing temperatures without proper winterization, fed water exceeding 160°F, connected to improper voltage or ungrounded circuits, or modified by bypassing the unloader valve. Safety Hazard: High-pressure fluid injection can cause severe personal injury; never point the spray wand at people, animals, or electrical equipment. Always test the 35-foot GFCI plug before each use, wear ANSI-approved eye protection and slip-resistant footwear, and ensure the wall mounting hardware is securely anchored before operating.
Optional
|