

Clean Storm 28092, 1-16 Inch MIP Countersunk Hex Plug Brass Fitting
Description
The Clean Storm 28092 is a precision-machined 1/16-inch Male Iron Pipe (MIP) countersunk hex plug engineered to securely seal unused female NPT ports in high-pressure fluid systems. Featuring a flush-mount internal hex drive design, this durable brass pipe plug eliminates protruding heads to prevent snagging and clearance interference inside compact carpet cleaning wands, truckmount manifolds, and industrial pressure washer assemblies. Its tapered pipe threads ensure a tight, leak-resistant mechanical seal under demanding thermal and hydraulic loads.
Features
- Flush-mounting countersunk hex socket head allows installation inside tight manifolds and recessed housings without external clearance issues.
- Precision-cut 1/16-inch Male National Pipe Taper (NPT / MIP) threads deliver reliable metal-to-metal wedging and leak-free port closure.
- Solid machined brass construction provides superior resistance to corrosion, rust, and chemical degradation from harsh cleaning detergents.
- Internal hex drive accepts standard Allen wrenches for controlled torque application without stripping external flats.
- Rated for high-pressure and elevated-temperature fluid transfer applications common in commercial extraction and wash equipment.
Applications
- Sealing unused auxiliary ports on truckmount carpet cleaning heat exchangers, chemical injection blocks, and solution manifolds.
- Capping test ports and bleed holes on commercial hot and cold water pressure washer pumps and unloader valves.
- Low-profile port plugging in pneumatic air lines, hydraulic test gauges, and industrial fluid distribution blocks.
- Portable carpet extractor plumbing assemblies and wand valve bodies requiring snag-free hardware.
Specifications
| Brand |
Clean Storm |
| Part Number |
28092 |
| Fitting Type |
Countersunk Hex Socket Pipe Plug |
| Thread Size and Type |
1/16 inch MIP (Male Iron Pipe / Male NPT Tapered) |
| Drive Style |
Internal Recessed Hex (Allen) |
| Material and Finish |
Machined Solid Brass, Natural Mill Finish |
| Swivel Mechanics |
Rigid Non-Swivel Static Plug |
| Maximum Operating Pressure |
Up to 1,200 PSI (system dependent) |
| Operating Temperature Range |
-65°F to +250°F (-53°C to +121°C) |
Cross-Reference SKUs
| 28092 |
| Clean Storm 28092 |
| 109CS-X |
| 109CSX |
| 109CS-1 |
| 109CS1 |
| 50785K267 |
| A415 |
Tips and Additional Information
Thread Sealing: Because 1/16-inch MIP threads are tapered, always apply a high-temperature PTFE thread sealant tape or anaerobic pipe dope rated for your system's chemical and thermal profile before installation. Keep sealant back one to two threads from the leading edge to prevent debris from entering the fluid stream.
Alignment and Torque: Hand-start the countersunk plug carefully to avoid cross-threading fine 1/16-inch NPT threads inside softer aluminum or brass manifolds. Tighten firmly with a properly sized hex key until snug; over-torquing tapered plugs can crack female manifold housings.
Live vs. Non-Live Usage: This is a static, non-swivel closure plug intended strictly for stationary ports. Do not use in rotating or live-swivel joints.
Pre-Install Inspection: Inspect both the male plug threads and the receiving female port for burrs, old sealant residue, or thread galling prior to assembly.
Frequently Asked Questions
Q: Does this plug sit completely flush when installed?
Yes, the countersunk headless design allows the plug to thread cleanly into standard 1/16-inch FNPT ports so the top sits flush or slightly recessed below the manifold surface.
Q: Is 1/16-inch MIP interchangeable with 1/16-inch NPT?
Yes, MIP (Male Iron Pipe) and Male NPT (National Pipe Taper) share the exact same thread pitch (27 threads per inch) and taper angle, making them fully compatible.
Q: Can this brass plug handle hot water truckmount temperatures?
Yes, solid brass construction safely withstands continuous high-temperature solution lines up to 250°F when paired with an appropriate high-temp thread sealant.
Warranty & Safety Information
Warranty Coverage: Covered by the manufacturer's standard limited warranty against defects in material and workmanship under normal operating conditions. Warranty is void if the fitting is damaged due to improper installation, cross-threading, over-torquing, chemical incompatibility, or operation beyond rated pressure and temperature limits.
Safety Precautions: Always depressurize fluid lines, shut down pumps, and allow hot water or steam systems to cool completely before installing or removing pipe plugs. Wear ANSI-approved eye protection when working with pressurized hydraulic, pneumatic, or chemical cleaning systems. Always verify full thread engagement before restoring system pressure.
|