

Clean Storm 28093, 1-8 in. MIP Countersunk Hex Plug, Solid Brass Pipe Fitting, Fluid Systems
Description
Seals unused 1/8 in. female NPT threaded ports flush with the surface in tight-clearance fluid and air lines up to 1,200 PSI. The Clean Storm 28093 Countersunk Hex Plug is a high-grade brass pipe fitting engineered to reliably close off unused 1/8 in. female NPT, MIP, or NPTF ports. Featuring a compact, flush-mount countersunk profile with an internal Allen (hex) drive socket, this plug sits level with the port face once installed, making it an ideal solution for tight-clearance assemblies where protruding external hex heads could snag or interfere with nearby components. Built for dependable service under pressure, it supports working pressures up to 1,200 PSI across temperatures from -65°F to +250°F (-53°C to 121°C) and is widely used in pressure washing systems, air compressors, hydraulics, fuel lines, lubrication lines, instrumentation, and general fluid-handling plumbing setups.
Features
- Flush-Mount Countersunk Profile: Sits flush with the surrounding port face to prevent snags and preserve clearance in tight or high-movement assemblies.
- Internal Allen Drive Socket: Uses a standard 0.18 in. internal hex socket for straightforward installation and removal with an Allen wrench without external wrench swing room.
- Solid Brass Construction: Delivers rugged mechanical strength and corrosion resistance across compatible liquid and gas lines while minimizing galling risks compared to unlubricated stainless steel.
- 1,200 PSI and Wide Thermal Rating: Rated for working pressures up to 1,200 PSI and operating temperatures from -65°F to +250°F (-53°C to 121°C).
- Multi-Metal System Compatibility: Pairs cleanly with brass, bronze, copper, steel, aluminum, and iron piping and manifolds.
Applications
- Pressure Washing Systems: Caps unused 1/8 in. ports on pumps, manifolds, unloader blocks, and washdown assemblies operating within rated pressure and temperature limits.
- Air Compressors and Pneumatic Lines: Seals auxiliary ports on compressor blocks, manifolds, and air distribution headers.
- Hydraulics and Lubrication Systems: Blocks spare test or supply ports in compact hydraulic blocks and centralized lubrication networks.
- Fuel Systems and Instrumentation: Closes auxiliary gauge, sensor, or bleed ports in fuel and instrumentation setups where flush mounting is advantageous.
- General Fluid-Handling Plumbing: Suitable for industrial, commercial, and shop fluid lines requiring a compact, recessed threaded plug.
Specifications
| Brand |
Clean Storm |
| Part Number / SKU |
28093 |
| Fitting Type |
Countersunk Hex Plug (Flush-Mount Pipe Plug) |
| Connection Size and Thread Type |
1/8 in. Male NPT, MIP, or NPTF |
| Head Style and Drive |
Countersunk Internal Hex (Allen Drive) |
| Socket Size |
0.18 in. |
| Swivel Mechanics |
Non-swivel rigid threaded plug |
| Material and Finish |
Solid Brass (uncoated natural brass finish) |
| Maximum Working Pressure |
1,200 PSI |
| Operating Temperature Range |
-65°F to +250°F (-53°C to 121°C) |
| Compatible Piping Materials |
Brass, Bronze, Copper, Steel, Aluminum, Iron |
| Primary Applications |
Pressure Washers, Air Compressors, Hydraulics, Fuel Systems, Lubrication, Instrumentation |
Cross-Reference SKUs
| 28093 |
| Clean Storm 28093 |
| CleanStorm 28093 |
| 017106 |
| 17106 |
| 06115-02 |
| 0611502 |
| 109AL-2 |
| 109AL2 |
| 109CS-A |
| 109CSA |
| 118-2 |
| 1182 |
| 118-A |
| 118A |
| 219P-2 |
| 219P2 |
| 226200 |
| 23155-2 |
| 231552 |
| 23155X2 |
| 3153x2 |
| 3153X2 |
| 50785K112 |
| 88153 |
| B415 |
| BP118-2 |
| BP1182 |
| S219P-2 |
| S219P2 |
Tips and Additional Information
Pre-Install Inspection and Thread Sealing: Before installation, inspect both the 1/8 in. male threads on the plug and the female port threads for burrs, dirt, debris, or thread damage. Tapered pipe threads (NPT and MIP) seal by thread flank engagement and sealant rather than bottoming out; apply a suitable thread sealant or PTFE tape appropriate for your fluid and temperature range, leaving the first lead thread clear so tape shreds do not enter the system. Alignment and Socket Engagement: Align the plug squarely with the port axis before turning so tapered threads do not cross-thread, and seat the 0.18 in. Allen wrench fully into the hex socket to prevent rounding the internal recess. Non-Live Installation and Swivel Note: This fitting is a rigid, non-swivel plug and must only be installed, torqued, or removed on depressurized, unheated, non-live lines after verifying compatibility with your media.
Frequently Asked Questions
Q: What Allen key size fits the Clean Storm 28093 countersunk plug?
A: It features a 0.18 in. internal hex (Allen) drive socket. Ensure your hex key fits snugly to full depth and avoid over-torquing tapered brass threads, which can stress or crack a thin-walled female boss.
Q: Does this 1/8 in. male plug sit completely flush once installed?
A: The countersunk design is engineered to sit flush or recessed near the port face when properly threaded into a standard port, helping prevent snags and interference in tight clearances; actual seating depth depends on port chamfer and thread engagement.
Q: Can I use this brass plug in systems above 1,200 PSI or outside -65°F to +250°F?
A: No. Do not exceed the 1,200 PSI maximum pressure rating or the -65°F to +250°F (-53°C to 121°C) temperature range, and verify that brass and your chosen thread sealant are chemically compatible with the specific fluid or gas.
Warranty & Safety Information
Warranty and Void Conditions: Coverage is subject to the manufacturer's or distributor's standard warranty terms for Clean Storm fittings against defects in materials and workmanship under normal, rated service. Improper installation, cross-threading, over-torquing, use of incompatible chemicals or media, unauthorized modification, or operation outside published pressure and temperature limits can void coverage. Pressure, Temperature, and Safety Hazards: Never exceed 1,200 PSI or operate outside -65°F to +250°F (-53°C to 121°C). Always depressurize, vent, cool, and lock out fluid or pneumatic systems before installing, inspecting, or removing plugs—pressurized lines, hot fluids, or high-pressure spray can cause severe injury or equipment damage, and improper sealing can cause leaks or component failure.
|

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Clean Storm 28093, 1-8 in. MIP Countersunk Hex Plug, Solid Brass Pipe Fitting, Fluid Systems [28093]
Click here for our full shipping policy. Specifications are subject to change without notice. Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products. Prop 65 Notice.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.
|