28096 for only $3.99 - Steambrite's price on the Threaded X Threaded - 28096 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Steam-brite.com Click here for Steam-brite.com's Norton Safe Web Security Report
 

  Steam-brite » » Parts & Accessories » Brass, Plastic, Steel, Stainless Hydraulic Fittings » Brass Fitting » Threaded X Threaded » 28096 My Account  |  Cart Contents  |  Checkout   

Store
Auto Detailing & Car Wash:
Chemicals
Construction Equipment
Equipment: Air Duct Cleaning Machines
Equipment: Carpet Cleaning Machines
Equipment: Hard Surface Cleaning Supplies
Equipment: Restoration
Escalator Cleaning Machines & Equipment
Generators Electrical
Janitorial Supplies Sanitorial
Miscellaneous
Parts & Accessories
   Bags, Belts & Magnets
   Battery Chargers And Batteries
   Blowers and Vacuum Pumps
   Bottles
   Brass, Plastic, Steel, Stainless Hydraulic Fittings
     Brass Fitting
       Compression
       Ferrules
       Splicer Barbed X Barbed
       Threaded X Barbed
       Threaded X Threaded
     Plastic Fittings
     Stainless Steel Fittings
     Steel Fittings
   Brushes, Bonnets, Pad Drivers, & Clutches
   Buckets
   Carpet Installation And Repair Tools
   Containment & Barrier Products
   DI and Reverse Osmosis Water Treatment Filters
   Drive, Lift, and Brush Motors
   Electric Car Chargers
   Electrical Adapter Temporary Power Boxes
   Electrical Components
   Engines
   Exhaust, Muffler, Silencer Systems
   Extension Power Cords
   Filters
   Fuel Tap Kits
   Gaskets, Lid, and Tops
   Gauges
   Glides
   Heaters
   Hose Clamps Metal
   Hose Cuffs & Connectors
   Hose Reels
   Hoses
   Husqvarna Accessories & Spare Parts
   Jets Nozzles TeeJets VeeJets Cone Spray M-Style Rotary Lazer
   Jetter Accessories
   Karcher Repair Parts
   Legend Brand Repair Parts
   Meters and Lights
   Miscellaneous Repair Parts
   Oil Change Extractor
   Ozone Cleaning Kits
   Pumps (Water Pumps)
   Quick Disconnects And Couplers
   Regulators & Unloaders
   Spark Plugs
   Spray Bar Rotary Arms
   Sprayer
   Sprayer Parts
   Squeegee Blades
   Steel Wool
   Switches
   Swivels Pressure Rotary Union
   Tanks: Fuel, Water, Vacuum
   Trigger Sprayers
   US Products Treadmaster Accessories
   Vacuum Boosters
   Vacuum Motors
   Valves
   Van Accessories/Holders
   Vectorfog
   Wheels and Casters
   White Magic Parts
Schools, Training, Books, & Videos
Trailers And Farm
Welding Equipment
Window Cleaning Tools & Equipment
Business Start Up Kits
Used Items
Browse by Manufacturer
Steambrite
About Us
Privacy Notice
Conditions of Use
Contact Us
Sitemap
Shipping & Returns
Reviews Carpet Cleaning Equipment
Write ReviewWrite a review on this product!
Translate
English
French French
Spanish Spanish
German German
Italian Italian
Portuguese Portuguese

Clean Storm 28096, Countersunk Hex Plug 1-2 Inch MIP Brass Pipe Fitting for Pressure Washers [28096]


Your Price:  $3.99 
Part Number: 28096
Quantity:
Estimated shipping cost: $ 8.00




Reviews


Clean Storm 28096, Countersunk Hex Plug 1-2 Inch MIP Brass Pipe Fitting for Pressure Washers

Description

The Clean Storm 28096 is a heavy-duty 1/2 inch MIP countersunk hex plug engineered to securely seal female threaded ports on commercial pressure washers and fluid transfer pumps. Precision-machined from solid corrosion-resistant brass, this flush-mount pipe fitting eliminates external protrusions in tight manifold assemblies and high-vibration environments. Built to withstand extreme operating pressures and elevated water temperatures, it serves as a direct OEM replacement for Karcher 8.706-866.0 and standard industrial NPT fluid ports.

Features

  • Flush Countersunk Profile: Recessed internal hex socket sits completely flush with the port face, preventing snagging, shearing, or clearance interference in compact pump manifolds.
  • Solid Brass Construction: Machined from high-grade C36000 free-cutting brass for superior resistance to rust, dezincification, and chemical degradation.
  • Precision Tapered Threads: Standard 1/2 inch Male Iron Pipe (MIP / NPT) tapered threads provide a tight, mechanical metal-to-metal wedge seal under high hydraulic load.
  • High-Torque Internal Hex Drive: Deep broached Allen socket ensures positive wrench engagement without rounding out during high-torque installation or maintenance removal.
  • Thermal and Vibration Resilience: Engineered to maintain seal integrity across rapid thermal expansion cycles and continuous pump pulsation.

Applications

  • Commercial and industrial hot or cold water pressure washer pump manifolds
  • Unloader valves, bypass blocks, and heater coil inlet/outlet ports
  • Carpet extractors, truck-mount cleaning units, and soft wash chemical systems
  • Pneumatic air lines, hydraulic return manifolds, and low-to-medium pressure fluid plumbing
  • Direct OEM service replacement for Karcher, Landa, Hotsy, Legacy, and Shark pressure washer equipment

Specifications

Brand Clean Storm
Primary Part Number 28096
OEM Replacement Reference Karcher 8.706-866.0
Fitting Style Countersunk Internal Hex Pipe Plug
Thread Size and Type 1/2 Inch MIP (Male Iron Pipe / NPT Tapered)
Drive Type Internal Allen / Hex Socket
Swivel Mechanics Rigid Non-Swivel (Fixed Thread)
Material and Finish Machined Solid Brass, Natural Unplated Finish
Maximum Operating Pressure 1,200 PSI (Standard Brass Pipe Rating)
Operating Temperature Range -65°F to +250°F (-53°C to +121°C)

Cross-Reference SKUs

28096
8.706-866.0
87068660
017110
17110
06115-12
0611512
109AL-12
109AL12
109CS-E
109CSE
118-E
118E
23155X12
3153x12
3153X12
50785K116
88157
F415
S219P-12
S219P12

Tips and Additional Information

Because this is a rigid, non-swivel tapered pipe plug, proper thread sealing is essential to prevent weeping under high pressure. Apply 3 to 4 wraps of high-density PTFE thread seal tape clockwise (when viewing the threaded end) or use a chemical-resistant anaerobic pipe thread sealant rated for your fluid media. Before installation, inspect both the male plug threads and the female manifold port for burrs, debris, or galling. Start the plug by hand for at least two full turns to ensure proper axial alignment and prevent cross-threading, then tighten firmly with a properly sized hex key—do not over-torque, as excessive force on tapered NPT threads can crack cast brass or aluminum pump manifolds.

Frequently Asked Questions

Q: Does this plug require an O-ring or crush washer to seal?

No. This fitting utilizes tapered 1/2 inch MIP (NPT) threads that form a seal through thread interference when paired with PTFE tape or liquid pipe thread sealant.

Q: Will this plug sit completely flat inside a 1/2 inch female port?

Yes, the countersunk headless design allows the plug to thread cleanly into standard 1/2 inch FPT ports until the top face is flush with or slightly recessed below the manifold surface.

Q: Is the Clean Storm 28096 a direct fit for Karcher part number 8.706-866.0?

Yes, it matches the exact 1/2 inch MIP thread pitch, countersunk hex drive geometry, and brass material specifications required to replace Karcher 8.706-866.0.

Warranty & Safety Information

Warranty Coverage: Covered under a 1-year limited manufacturer warranty against defects in materials and machining workmanship under normal operating conditions. Warranty is void if the fitting is damaged due to over-torquing, cross-threading, exposure to incompatible corrosive acids, or operation beyond rated pressure and temperature limits.
Safety Warning: Never exceed the maximum working pressure of 1,200 PSI or temperatures above 250°F, and do not use this standard brass fitting for potable drinking water systems (contains lead per standard C36000 brass alloy specifications). Always depressurize the pump, shut off power/fuel, and allow heated components to cool completely before installing or removing pressurized plumbing plugs to avoid severe fluid injection or burn injuries.





Carpet Cleaning Equipment Truckmount Truck Mount Truckmounted Extractor

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Clean Storm 28096, Countersunk Hex Plug 1-2 Inch MIP Brass Pipe Fitting for Pressure Washers [28096]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products. Prop 65 Notice.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.




This product was added to our store on Friday 06 June, 2014.
Reviews
Product Datasheet Click on the Acrobat Symbol to download this page as a PDF Document
Related Items:
Clean Storm 30063, 3/4" Male Garden Hose x 1/2" FIP x 3/4" MIP Brass Triple-Threaded Adapter

Clean Storm 30063, 3/4" Male Garden Hose x 1/2" FIP x 3/4" MIP Brass Triple-Threaded Adapter (30063)

Shopping Cart Carpet Cleaning Equipment
0 items
Manufacturer Info
Clean Storm
- Other products
Notifications Carpet Cleaning Equipment
NotificationsNotify me of updates to Clean Storm 28096, Countersunk Hex Plug 1-2 Inch MIP Brass Pipe Fitting for Pressure Washers
Specials Carpet Cleaning Equipment
Scratch and Dent Imperial 1942-KIT-2HD Tangential 4Hole Mounting Vac Motor, w13gal Adaptor 5.7in Replacement 2STAGE
Scratch and Dent Imperial 1942-KIT-2HD Tangential 4Hole Mounting Vac Motor, w13gal Adaptor 5.7in Replacement 2STAGE
$105.90
$77.54
What's New? Carpet Cleaning Equipment
Karcher 8.614-086.0 Light Grey Crevice Tool for Sensor and Versamatic Vacuums
Karcher 8.614-086.0 Light Grey Crevice Tool for Sensor and Versamatic Vacuums



carpet cleaning equipment
Click here to Apply Online!

Videos

Mytee Spinner Tools

Accepted Credit Cards & Paypal
1982 - 2026 Steambrite Supply
Carpet Cleaning Machines|Truck Mount Machines

 $3.99