

Clean Storm 28097, 3-4 Inch MIP Countersunk Hex Pipe Plug Solid Brass Pumptec 30577 Pump Fitting
Description
The Clean Storm 28097 Brass Countersunk Hex Plug provides a high-pressure, flush-mount seal for 3/4" female threaded pump ports, manifolds, and commercial plumbing systems. Precision-machined from heavy-duty solid brass, this internal hex drive fitting installs completely smooth against manifold surfaces to eliminate snag hazards and maximize clearance in tight equipment assemblies. Engineered to resist rust, scale, and chemical corrosion, it serves as a direct OEM replacement for Pumptec part number 30577 across commercial pressure washers, carpet extractors, and industrial fluid transfer manifolds.
Features
- Flush-Mount Countersunk Profile: Internal Allen hex socket drive sits completely level with the manifold or pump housing surface, preventing snags and saving clearance space.
- Solid Brass Construction: Machined from high-grade corrosion-resistant brass to withstand continuous exposure to water, detergents, and harsh cleaning chemicals without rusting.
- Precision 3/4" MIP Tapered Threads: Standard Male Iron Pipe (NPT) tapered threading creates a tight, mechanical interference seal in compatible female ports.
- High-Pressure Industrial Durability: Thick-walled solid brass body resists stripping, cracking, and deformation under demanding pump operating pressures.
- Direct OEM Interchangeability: Exact dimensional match for Pumptec 30577 and standard industrial 3/4" brass countersunk pipe plugs.
Applications
- Commercial and industrial high-pressure washer pump manifolds and bypass ports
- Portable and truckmount carpet cleaning extraction equipment
- Pumptec high-pressure plunger and diaphragm pump assemblies
- Industrial fluid transfer lines, chemical injection manifolds, and water supply plumbing
- Tight-clearance machinery housings requiring snag-free, low-profile port closures
Specifications
| Brand |
Clean Storm |
| Part Number |
28097 |
| OEM Replacement Reference |
Pumptec 30577 |
| Fitting Type |
Countersunk Pipe Plug |
| Thread Size and Standard |
3/4" MIP (Male Iron Pipe / NPT Tapered) |
| Drive Style |
Internal Hex Socket (Allen Drive) |
| Material and Finish |
Machined Solid Brass (Natural Finish) |
| Swivel Mechanics |
Non-Swivel Fixed Rigid Plug |
| Maximum Operating Pressure |
Up to 1,200 PSI (Standard Brass Pipe Fitting Rating; verify system limits) |
| Operating Temperature Range |
-65°F to 250°F (-53°C to 121°C) |
Cross-Reference SKUs
| 28097 |
| Pumptec 30577 |
| 30577 |
| 017110 |
| 06115-12 |
| 0611512 |
| 109AL-12 |
| 109AL12 |
| 109CS-E |
| 109CSE |
| 118-E |
| 118E |
| 17110 |
| 23155X12 |
| 3153x12 |
| 50785K116 |
| 88157 |
| F415 |
| S219P-12 |
| S219P12 |
Tips and Additional Information
Because 3/4" MIP (NPT) threads rely on thread deformation for a pressure-tight seal, always apply high-density PTFE thread seal tape (wrapped clockwise 3 to 4 turns) or a compatible liquid anaerobic pipe sealant prior to installation. Before threading the plug into the manifold, inspect both male and female threads for burrs, debris, or old sealant residue to prevent galling.
This is a static, non-live rigid plug intended solely for stationary port sealing; never install it in rotating or swiveling assemblies. Start threading by hand to ensure proper axial alignment and avoid cross-threading softer aluminum or brass pump heads. Use a properly sized, unworn Allen hex key to tighten snugly without over-torquing, as excessive force on tapered brass threads can crack cast pump manifolds.
Frequently Asked Questions
Q: Are 3/4" MIP threads compatible with 3/4" NPT female ports?
Yes. MIP (Male Iron Pipe) and NPT (National Pipe Thread) share the exact same 14 threads-per-inch pitch and 1° 47' taper angle, making them fully interchangeable for standard plumbing and pump port applications.
Q: Does this plug require a rubber O-ring or crush washer to seal?
No. Tapered MIP/NPT threads form a metal-to-metal interference seal as the plug is tightened into the port. Use PTFE tape or pipe thread sealant rather than an O-ring.
Q: Will this brass plug corrode when used with carpet extraction detergents or hard water?
No. Solid brass offers high resistance to rust, mineral scale, and mild-to-moderate cleaning solutions commonly used in commercial pressure washing and carpet extraction systems.
Q: Is this an exact fit for Pumptec manifolds requiring part number 30577?
Yes. The Clean Storm 28097 is engineered to match the exact thread dimensions and flush countersunk profile of Pumptec 30577.
Warranty & Safety Information
Covered by a 1-year limited manufacturer warranty against defects in material and workmanship under normal operating conditions. Warranty coverage is void if the fitting is damaged due to cross-threading, over-torquing, stripping of the internal hex socket with improper tools, exposure to incompatible corrosive acids, or operation beyond rated pressure and temperature limits.
Safety Warning: Do not exceed the maximum pressure rating of your pump manifold or the lowest-rated component in your fluid system. Always shut off power, isolate fluid supply lines, and completely relieve system pressure before installing, tightening, or removing any pressurized pipe plug. Wear ANSI-approved eye protection during installation and system pressure testing.
|