

Clean Storm 28109L, Brass Hex Bushing 3-4 Inch MIP x 1-4 Inch FIP Pipe Reducer Fitting for Little Giant Heaters and Pressure Washers
Description
The Clean Storm 28109L Brass Hex Bushing reduces a 3/4-inch Male Iron Pipe (MIP) port down to a 1/4-inch Female Iron Pipe (FIP) connection for fluid, gas, and heating assemblies. Machined from solid brass to resist corrosion and thermal stress, this precision reducer fitting provides a leak-tight seal in high-demand equipment. It serves as a direct replacement for OEM part 8.706-923.0 on Little Giant water heaters, commercial pressure washers, carpet extractors, and industrial water treatment manifolds where dependable thread engagement is critical.
Features
- Solid brass construction offers natural corrosion resistance against water, steam, detergents, and fuel lines.
- Precision-machined National Pipe Taper (NPT) threads ensure tight, reliable mechanical engagement under vibration.
- Integrated hexagonal head design allows secure wrench torqueing during installation and removal without rounding edges.
- Compact reducer profile saves plumbing clearance inside tight heater cabinets and pressure washer frames.
- Direct OEM interchange compatibility matches 8.706-923.0 and multiple industry standard brass pipe bushing specifications.
Applications
- Little Giant propane and oil-fired water heaters used in truckmount carpet cleaning systems.
- Commercial hot and cold water pressure washers (including Karcher, Landa, and Shark series manifolds).
- Industrial water treatment, filtration, and chemical injection plumbing assemblies.
- Air compressor lines, pressure switch ports, gauge mounts, and general fluid transfer systems.
Specifications
| Brand |
Clean Storm |
| Part Number |
28109L |
| OEM Reference |
8.706-923.0 / 87069230 |
| Fitting Type |
Hex Head Reducer Bushing (Rigid / Non-Swivel) |
| Male Thread Size |
3/4 Inch MIP (NPT Tapered Male) |
| Female Thread Size |
1/4 Inch FIP (NPT Tapered Female) |
| Material |
Machined Solid Brass |
| Finish |
Natural Uncoated Brass |
| Swivel Mechanics |
Fixed Rigid Body (Non-Live Connection) |
| Pressure Rating |
Standard Brass Pipe Fitting Rating (Up to 1,200 PSI depending on media and temperature) |
| Temperature Rating |
-65°F to +250°F (-53°C to +121°C) |
Cross-Reference SKUs
| 28109L |
| 8.706-923.0 |
| 87069230 |
| 2-1079 |
| 21079 |
| 06110-1204 |
| 061101204 |
| 106-0147 |
| 1060147 |
| 110 3/4 x 1/4 |
| 110-12-4 |
| 110-124 |
| 110124 |
| 110-EB |
| 110EB |
| 110A-EB |
| 110AEB |
| 110JC |
| 209-124 |
| 209124 |
| 209P-12-4 |
| 209P124 |
| 23232x4 |
| 23232X4 |
| 3731204C |
| 73220-12-4 |
| 73220124 |
| HB2F6M |
| L373-1204 |
| L3731204 |
| PF209-12-4 |
| PF209124 |
| PRB-12-4 |
| PRB124 |
Tips and Additional Information
Because this hex bushing features tapered NPT threads, always apply a compatible PTFE thread seal tape or high-temperature liquid pipe thread sealant to the male threads before assembly, leaving the first two threads bare to prevent sealant debris from entering valves or burner nozzles. This is a rigid, non-live fitting designed for stationary connections rather than continuous rotational movement. Prior to installation, inspect both internal and external threads for burrs, dirt, or cross-threading, and start the bushing by hand before tightening with an open-end wrench on the hex flats—avoid over-torquing, as excessive force can crack female cast-iron or brass ports.
Frequently Asked Questions
Q: Is the Clean Storm 28109L bushing compatible with Little Giant water heaters?
Yes, this 3/4-inch MIP by 1/4-inch FIP brass hex bushing is commonly used on Little Giant heater manifolds and plumbing assemblies to step down larger port openings for gauges, switches, or pilot lines.
Q: Does this bushing include a live swivel mechanism?
No, the 28109L is a solid, fixed-body hex reducer bushing. It does not rotate after tightening and should not be used where continuous 360-degree live swivel movement is required.
Q: What type of thread sealant should be used on this brass fitting?
Use PTFE tape or anaerobic pipe thread sealant rated for your specific fluid, gas, and operating temperature. If installing on a propane or fuel line on a Little Giant heater, verify that the sealant is UL-listed for gas service.
Warranty & Safety Information
Covered by standard manufacturer warranty against defects in materials and machining workmanship under normal operating conditions. Warranty coverage is void if the fitting fails due to improper installation, cross-threading, over-torquing, chemical incompatibility, freezing, or operation beyond rated pressure and temperature limits. Always depressurize fluid lines, shut off gas valves, and allow heating coils to cool completely before servicing plumbing connections, and wear appropriate eye and hand protection during installation.
|