Clean Storm 85.403.007, 20in Plastic Spinning Surface Cleaner Rotary Cement Wand, 3/8in QC Inlet

Description

The Clean Storm 85.403.007 20" Polypropylene Surface Cleaner delivers heavy-duty pressure washing efficiency up to 4000 PSI and 8.0 GPM for concrete and flat surface cleaning. Built with a durable high-impact polypropylene cover, a two-arm rotary spray bar equipped with two #2.5 @ 25° meg nozzles, and an integrated trigger gun with a 3/8" Quick Connect plug, this cement wand dramatically speeds up surface cleaning while eliminating zebra striping. Designed for optimal performance with gas engines rated 9 HP and pumps delivering 3.0 GPM or greater, it maintains constant operating temperatures up to 212°F while containing overspray via its full nylon brush skirt.

Features

• High-Impact 20-Inch Polypropylene Housing: Lightweight, corrosion-resistant plastic deck reduces operator fatigue while maintaining long-term structural durability.
• Balanced 2-Arm Rotary Spray Bar: Engineered with two calibrated #2.5 25-degree meg spray nozzles for uniform chemical and high-pressure water distribution without streak lines.
• Full Nylon Brush Skirt: Encapsulates high-pressure water spray, minimizing overspray and protecting adjacent landscaping, walls, and vehicles during operation.
• Integrated Heavy-Duty Trigger Gun: Features an ergonomically designed spray gun equipped with a standard 3/8" Quick Connect plug inlet for instant hose attachment.
• High Flow & Temperature Capacity: Rated for operating pressures up to 4,000 PSI, flow rates up to 8.0 GPM, and fluid temperatures reaching 212°F.
• Efficiency Optimization: Cleans flat surfaces up to 3 to 4 times faster than standard handheld spray wands.

Applications

• Residential & Commercial Concrete Cleaning: Driveways, sidewalks, garage floors, patios, and parking structures.
• Commercial Property Maintenance: Service stations, drive-thrus, entryways, and pool decks.
• Pressure Washer Equipment Compatibility: Functions seamlessly with commercial gas-driven pressure washers, truckmount units, and industrial pressure pumps rated at 3.0 GPM or higher.
• Industrial Surface Prep: Rapid removal of dirt, algae, moss, grime, and surface contaminants from flat stone, concrete, and masonry surfaces.

Specifications

Cross-Reference SKUs

Tips and Additional Information

To maximize the operational lifespan and cleaning effectiveness of your Clean Storm 20" surface cleaner, ensure your pressure washer pump provides a minimum flow rate of 3.0 GPM. Prior to initial connection, flush high-pressure supply hoses to clear debris that could clog the fine orifices of the two #2.5 spray nozzles. Always inspect nozzle orifices for buildup or blockages; clogged nozzles cause severe vibration and irregular rotation. Ensure thread tape or sealant is properly applied if replacing spray tips or trigger gun fittings. Note: Units may ship in either yellow or gray high-impact plastic housing with or without top dome brand stickers depending on manufacturing batch run, but feature identical structural and mechanical performance specifications.

Factory Installed

BE Pressure 89218340, 16 Whirl A Way Triggler Valve, GTIN NA

Frequently Asked Questions

Q: What size pressure washer is required to run this 20-inch surface cleaner?
A: It is recommended to use a gas-powered pressure washer with an engine rating of at least 9 HP and a pump output of at least 3.0 GPM up to 8.0 GPM, with an operating pressure between 1,000 PSI and 4,000 PSI.

Q: What inlet connection is provided on the surface cleaner?
A: The integrated trigger gun assembly comes equipped with a standard 3/8" Quick Connect male plug inlet for fast pairing with standard pressure washer discharge hoses.

Q: Can I use this surface cleaner with hot water pressure washers?
A: Yes, the unit is rated to withstand hot water temperatures up to 212°F (100°C).

Q: What nozzle size comes pre-installed on the rotary spray bar?
A: The rotary bar includes two standard #2.5 meg nozzles with a 25-degree fan spray pattern, equivalent to a combined orifice size of 5.0.

Warranty & Safety Information

This product carries a manufacturer limited warranty covering defects in materials and workmanship under standard operating conditions. Warranty coverage does not extend to normal wear items including spray nozzles, nylon brush skirts, O-rings, and swivel seal wear caused by abrasive water debris. Operating the surface cleaner beyond the maximum specified ratings of 4,000 PSI, 8.0 GPM, or 212°F will immediately void the warranty. Always wear protective eye and foot protection during operation. Never attempt to inspect, clean, or service the rotary arm or nozzles while connected to a pressurized water system or while the pressure washer motor is running.