Clean Storm AH20, DustDowner Dry Vacuum Mister with 2in Hose Cuffs, Brass Quick Disconnect

Description

The Clean Storm AH20 DustDowner Dry Vacuum Mister integrates a high-efficiency spray jet and quick-connect coupling inside a heavy-duty 2-inch vacuum hose joiner. Engineered to protect carpet extraction and truckmount vacuum blowers during dry vacuuming, it continuously injects fine water mist directly into the vacuum airflow to instantly suppress dust, grit, and airborne debris before it reaches your equipment.

Features

• Integrated Brass Quick Connect (QD): Allows rapid attachment to standard water supply lines for seamless setup.
• Heavy-Duty 2-Inch Hose Joiner Construction: Engineered to withstand harsh industrial restoration and cleaning environments.
• Precision Internal Spray Jet Assembly: Delivers optimal atomized water mist to thoroughly saturate incoming dry particulate.
• Equipment Protection Mechanism: Converts dry, hazardous dust into liquid solution to prevent blower abrasion and overheating.
• Dual Installation Versatility: Can be positioned inline directly adjacent to the machine or attached directly behind the vacuum wand.

Applications

• Primary Companion Tool: Designed specifically for use with the TurboBrite vacuuming tool.
• Air Duct Cleaning: Essential inline misting setup when converting extraction gear for HVAC duct remediation.
• Dry Extraction Protection: Safeguards truckmount and portable carpet extractor vacuum blowers from fine drywall dust and silica grit.
• Industrial Vacuuming: Suitable for commercial surface restoration and heavy particulate remediation setups using 2-inch vacuum hoses.

Specifications

Cross-Reference SKUs

Tips and Additional Information

For maximum protection, position the Clean Storm AH20 inline between the vacuum hose and the cleaning wand. This ensures dust is encapsulated immediately upon entering the vacuum line. Thread-seal tape or thread sealant should be inspected on the spray jet threads prior to initial use. When transitioning carpet extraction units to air duct cleaning operations, contractors have two primary equipment configurations available: (1) utilizing an inline misting system like the AH20 DustDowner to convert airborne dust into a liquid slurry for safe collection in standard recovery tanks, or (2) installing a dedicated high-efficiency HEPA dry filtration separator in-line prior to the vacuum pump inlet.

Frequently Asked Questions

Q: Where is the optimal placement for the Clean Storm AH20 in my vacuum line?

A: While the unit can be connected right next to your machine intake, placing it directly between the vacuum hose and wand is preferred for immediate dust suppression.

Q: How does the DustDowner prevent vacuum blower damage?

A: Fine dry dust and abrasive grit can quickly score vacuum blower impellers and ruin seals. The AH20 sprays a constant water mist into the 2-inch airflow, turning dry debris into a wet slurry that your machine's recovery tank can safely handle.

Q: What options are available when upgrading from carpet and tile cleaning to air duct cleaning?

A: When expanding into air duct cleaning with existing extraction machinery, you can either use an inline water-misting setup like the Clean Storm AH20 DustDowner to wash dust out of the air stream into solution, or connect a dry HEPA collection box filter upstream of the blower inlet to capture airborne particulate dry.

Warranty & Safety Information

The Clean Storm AH20 comes backed by a 90-day manufacturer limited warranty covering defects in materials and workmanship under standard operating conditions. Warranty coverage does not cover damage caused by running abrasive chemicals through the misting jet, exceeding maximum pressure ratings, or operating without adequate water supply. Always relieve solution line pressure before disconnecting the quick-connect water supply line to prevent high-pressure fluid injection hazards.