Clean Storm AS110001 Super Scrub 500 Portable HEPA Air Scrubber
Variable-speed, 120-volt air filtration machine for water-damage restoration, remodeling, construction dust control, odor-control projects, and negative-air applications.
Product highlights
- Up to approximately 500 CFM with clean filters and no ducting
- Approximately 310 CFM on low speed
- Variable-speed airflow control
- Two-stage filtration with a G4 prefilter and H13 HEPA filter
- HEPA filtration captures 99.97% of particles at 0.3 micron under applicable test conditions
- Built-in GFCI-protected auxiliary outlet for daisy chaining compatible equipment
- Long 25-foot power cord
- Ductable intake for containment and negative-air setups
- Portable, stackable rotomolded housing
- Two filters included and installed
Professional Air Filtration for Restoration and Construction
The Clean Storm Super Scrub 500 AS110001 is a compact commercial HEPA air scrubber designed to continuously pull contaminated air through its filtration system and return filtered air to the work area. It can also be connected to ducting and used as part of a negative-air containment system.
Its variable-speed fan allows the operator to balance airflow, noise, filter loading, and electrical consumption for the job. The lightweight portable design makes it suitable for restoration contractors, carpet cleaners, remodeling crews, maintenance departments, property managers, and indoor-air-quality professionals.
Common Applications
Water-Damage Restoration
Helps filter airborne dust, fibers, spores, and debris disturbed during demolition, drying, and cleanup. |
Construction and Remodeling
Use during sanding, drywall work, flooring removal, demolition, and general dust-producing projects. |
Negative-Air Containment
Connect suitable ducting to help exhaust filtered air from an isolated work area. |
Odor-Control Projects
Use with the appropriate optional activated-carbon filter when reducing nuisance odors and gaseous contaminants. |
Commercial Air Cleaning
Useful in offices, schools, hotels, workshops, warehouses, and occupied buildings where supplemental particulate filtration is needed. |
Fire and Smoke Cleanup
Helps capture airborne particulate matter during properly managed restoration procedures. |
Two-Stage Filtration System
Stage 1: G4 Prefilter
The first-stage prefilter captures larger dust and debris before they reach the more expensive HEPA filter. Replacing the prefilter regularly can improve airflow and extend HEPA-filter service life.
Stage 2: H13 HEPA Filter
The primary H13 HEPA filter captures extremely fine airborne particulate matter. HEPA filtration is commonly rated to capture at least 99.97% of particles measuring 0.3 micron under controlled test conditions.
An optional activated-carbon filter may be added for applications involving nuisance odors and certain gaseous contaminants. Carbon-filter effectiveness and service life depend on the contaminant, concentration, humidity, airflow, and exposure time.
Airflow Ratings Explained
The Super Scrub 500 is rated at approximately 500 CFM with clean filters installed and no ducting attached. The approximately 800 CFM figure refers to unrestricted airflow without filter resistance and should not be treated as the normal filtered operating airflow.
Actual jobsite airflow will vary according to filter condition, filter type, duct length, duct diameter, bends, containment pressure, voltage, and other restrictions.
Built-In GFCI Auxiliary Outlet
The onboard GFCI-protected outlet allows compatible equipment to be connected through the air scrubber when electrical capacity permits. The outlet is rated for approximately:
- 12 amps available when the air scrubber is turned off
- 10 amps available when the air scrubber is operating
Always calculate the total circuit load before connecting additional equipment. Do not exceed the rating of the building circuit, extension cord, GFCI outlet, or connected equipment.
Specifications
| Specification |
Rating |
| Brand |
Clean Storm |
| Model / Part Number |
AS110001 |
| Product Type |
Portable HEPA air scrubber / negative-air machine |
| Electrical |
120 volts, 60 Hz |
| Operating Current |
Approximately 1.8 to 2 amps, depending on operating speed |
| Fan Speed |
Up to approximately 1450 RPM |
| Filtered Airflow |
Approximately 310 CFM low and up to 500 CFM high with clean filters and no ducting |
| Unrestricted Airflow |
Up to approximately 800 CFM without normal filter resistance |
| Speed Control |
Recessed variable-speed controller |
| Primary Filter |
H13 HEPA |
| Prefilter |
G4 |
| HEPA Filter Size |
Approximately 18-1/4 x 18-1/4 x 2-9/16 inches
(465 x 465 x 65 mm) |
| Prefilter Size |
Approximately 17-7/8 x 17-7/8 x 1 inch
(455 x 455 x 22 mm) |
| Intake Diameter |
Approximately 16.25-inch outside diameter |
| Power Cord |
25 feet |
| Unit Weight |
Approximately 40 lbs. |
| Shipping Weight |
Approximately 42 lbs. |
| Shipping Carton |
Approximately 22 x 24 x 14 inches |
| Certifications Listed |
ETL / cETL; certification markings may vary by production run and destination |
| Xactimate Code |
WTRNAFAN |
What Is Included?
- One Clean Storm Super Scrub 500 HEPA air scrubber
- One G4 first-stage prefilter, installed
- One H13 HEPA primary filter, installed
- 25-foot attached power cord
Ducting, carbon filters, replacement filters, containment materials, monitoring instruments, and other accessories are sold separately unless specifically stated otherwise in the order.
Replacement Filters and Optional Accessories
Confirm filter dimensions before ordering replacement filters because product designs and suppliers can change.
Frequently Asked Questions
Is this an air scrubber or a negative-air machine?
It can perform either function. Operate it within the room as an air scrubber, or connect appropriate ducting and exhaust filtered air outside the containment area to help create negative pressure.
Does it include a HEPA filter?
Yes. A primary H13 HEPA filter and a first-stage prefilter are included and installed in a new unit.
Is the normal airflow 500 CFM or 800 CFM?
The practical filtered rating is approximately 500 CFM with clean filters and no attached ducting. The 800 CFM figure represents unrestricted airflow without normal filter resistance.
Can several units be connected together?
The built-in GFCI auxiliary outlet can power compatible downstream equipment when the combined amperage remains within the outlet and building-circuit limits. Always verify the entire electrical load before daisy chaining.
Can it remove odors?
The included particulate filters are intended primarily for airborne particles. An appropriate optional activated-carbon filter is normally required for odor-control applications.
How often should the filters be changed?
There is no universal replacement interval. Inspect filters before and during each job. Replace the prefilter when visibly loaded, damaged, wet, contaminated, or when airflow declines. Replace the HEPA filter when damaged, contaminated, wet, unable to pass required testing, or when airflow remains restricted after replacing the prefilter.
Can it be used for mold, asbestos, lead, or hazardous materials?
Air scrubbers are commonly incorporated into professional containment plans, but the machine alone does not make a project safe or compliant. Hazardous-material work must follow all applicable federal, state, and local regulations, approved work practices, personal-protective-equipment requirements, containment procedures, filter-disposal rules, and clearance-testing requirements.
Important operating notice:
Do not operate the unit in standing water, rain, explosive atmospheres, or where electrical components may become wet. Do not use a damaged cord or plug. Filters may contain hazardous material after use and must be handled and disposed of according to the contaminants present and all applicable regulations.
Appearance and Product Identification
Final housing color or shade is not guaranteed and may vary by production run. Units generally ship in the blue color family. Photographs are provided for general reference. Orders are fulfilled according to the manufacturer and part number shown on the order.
This model has been associated or compared with machines sold under several private-label or related descriptions, including Super Scrub 500, Contair SB-500, HEPAPro AS110001, BlueDri AS-550, BD-AS-550-BL, AirShield 550, Mounto AF500, and similar 500 CFM air scrubbers. These references are supplied only to assist with identification and comparison. They do not guarantee that every component, certification, filter, color, feature, or warranty is identical.
Specifications are subject to change without notice. Airflow is affected by filter loading, ducting, voltage, static pressure, environmental conditions, and configuration. Verify critical dimensions and requirements before ordering.
English
French
Spanish
German
Italian
Portuguese
