

Clean Storm AX21, Sink Faucet Adapter Connection Kit Multi-Thread Brass Truckmount Carpet Cleaning
Description
Universal sink faucet adapter connection kit engineered to link truckmount extractors and auto-fill auto-dump carpet cleaning machines directly to indoor hot or cold water supplies. Designed for commercial restoration and carpet cleaning technicians working in residential and commercial properties lacking accessible exterior hose bibs, this multi-fitting assortment eliminates jobsite downtime caused by non-standard sink aerator threads. Each precision-machined adapter converts specialized male and female faucet spout threads into a standard 3/4-inch Garden Hose Thread (GHT) water feed, ensuring uninterrupted fresh water supply for continuous extraction and chemical mixing. Organized on a heavy-duty retaining ring or inside a compartmentalized plastic storage box for rapid field selection, the Clean Storm AX21 kit provides reliable, leak-resistant hookups across kitchen, bathroom, and utility sinks.
Features
- Comprehensive Multi-Thread Assortment: Covers standard and specialty male and female sink aerator threads—including common 15/16"-27, 55/64"-27, 13/16"-27, and metric M22/M24 sizes—converting them to a universal 3/4" GHT hose connection.
- Corrosion-Resistant Construction: Machined from heavy-duty solid brass with chrome-plated and natural brass finishes to resist mineral buildup, thermal shock, and oxidation from continuous hot and cold water exposure.
- Elastomeric Sealing Washers Included: Equipped with high-temperature rubber and neoprene flat washers to create positive compression seals against faucet seats without over-torquing delicate customer fixtures.
- High-Flow Internal Bore Design: Engineered with wide internal passages to maximize municipal water volume delivery to truckmount fresh water tanks and portable auto-fill float valves.
- Field-Ready Organization: Ships on a durable metal storage ring or inside a compact plastic storage case to prevent lost fittings inside service vans and toolboxes.
Applications
- Truckmount Carpet Cleaning Systems: Supplies continuous fresh water to onboard water boxes and holding tanks on slide-in and direct-drive truckmount units when exterior spigots are winterized, locked, or absent.
- Auto-Fill and Auto-Dump Portable Extractors: Connects dual-cord and high-flow portable carpet extractors directly to indoor utility, kitchen, or restroom faucets for non-stop extraction.
- High-Rise Apartments and Commercial Offices: Enables floor-care technicians to tap into breakroom or janitorial sink water lines during upper-level commercial cleaning jobs.
- Cold-Weather and Winterized Properties: Provides a reliable indoor hot or cold water hookup when outdoor residential hose bibs are shut off or frozen.
- Water Damage Restoration and Hard-Surface Cleaning: Delivers steady municipal water pressure for tile and grout rotary tools, pressure-assisted flushing, and chemical dilution stations.
Specifications
| Brand |
Clean Storm |
| Primary Model / SKU |
AX21 |
| Outlet Connection Thread |
3/4 in. Male Garden Hose Thread (GHT) |
| Inlet Thread Compatibility |
Assorted Fine & Coarse Male/Female Sink Aerator Threads (15/16"-27, 55/64"-27, 13/16"-27, Metric) |
| Body Material & Finish |
Solid Machined Brass with Chrome-Plated and Natural Brass Finishes |
| Seal Material |
High-Temperature Rubber / Neoprene Compression Washers |
| Swivel Mechanics |
Rigid Direct-Thread Adapters (Requires Hose Swivel or Back-Twist Installation) |
| Operating Pressure Rating |
Standard Municipal Water Supply Pressure (Up to 100 PSI Max) |
| Operating Temperature Rating |
Up to 180°F (82°C) for Hot & Cold Tap Water |
| Storage Format |
Metal Retaining Ring or Compartmentalized Plastic Storage Box (Varies by Lot) |
Video
Cross-Reference SKUs
| AX21 |
| FA001 |
| Butler A630 |
| A630 |
| 8.697-406.0 |
| 86974060 |
| 112568 |
| 1658-1629 |
| 16581629 |
Tips and Additional Information
Pre-Install Inspection & Aerator Removal: Before threading any adapter onto a customer's sink, inspect the existing aerator for heavy calcium scale or seized threads. Wrap a thick microfiber towel around the aerator housing before using pliers to prevent scratching chrome, brushed nickel, or oil-rubbed bronze finishes. Verify that the customer's original aerator gasket is completely removed from the faucet spout so double-gasketing does not block thread engagement.
Thread Sealing & Alignment: Sink faucet adapters rely on flat elastomeric compression washers rather than tapered pipe threads; do not apply PTFE thread seal tape to straight aerator threads, as tape can bunch up and prevent the washer from seating flush. Always start threads by hand to avoid cross-threading soft brass or plastic faucet spouts, and use the thinner washer for shallow kitchen spouts or stack the thicker washer for deeper bathroom aerator recesses.
Live vs. Non-Live Swivel Connection: Because these individual adapters are rigid, non-live fittings, back-twist your water supply hose counter-clockwise two to three turns before hand-tightening the female swivel nut onto the adapter. This prevents hose memory from unthreading the adapter once municipal water pressure is turned on. If connecting a single-handle mixer faucet, set the desired water temperature at the tap prior to pressurizing the hose, and never leave a pressurized indoor sink hookup unattended.
Frequently Asked Questions
Q: Will the Clean Storm AX21 kit fit both internal (female) and external (male) threaded sink faucets?
Yes. The AX21 assortment includes both male-threaded adapters for faucets with internal female threads and female-threaded adapters for faucets with external male threads, covering the majority of residential and commercial kitchen, bathroom, and utility spouts.
Q: Can I use this adapter kit to pull hot tap water into my portable extractor or truckmount?
Yes. The solid brass fittings and elastomeric washers are rated for standard domestic hot water temperatures up to 180°F (82°C), allowing you to feed hot tap water directly into your machine's fresh water tank or auto-fill valve.
Q: Why does water drip from the top of the adapter even when it is tightened onto the sink?
A leak at the top collar usually indicates a missing washer, a damaged gasket left behind from the old aerator, or insufficient washer stack height. Ensure the old aerator washer is cleared out and select the thicker rubber washer (or layer thin and thick washers as needed) so the spout rim compresses firmly against the seal.
Q: Does this kit work on pull-out spray wand kitchen faucets?
Standard aerator adapters fit conventional rigid and swivel gooseneck spouts with removable screw-in aerators. Modern pull-out or pull-down spray heads typically use proprietary quick-connect hoses or recessed non-standard threads that do not accept standard 3/4" GHT aerator adapters.
Warranty & Safety Information
Warranty Coverage & Void Conditions: Covered under a standard 90-day limited manufacturer warranty against defects in machining and material workmanship from the date of purchase. Warranty coverage is voided by cross-threading damage, over-tightening with mechanical wrenches, exposure to high-pressure pump discharge exceeding 100 PSI, chemical corrosion from harsh acids, or loss of loose components and washers during field use.
Pressure, Temperature & Jobsite Safety Hazards: This kit is engineered strictly for low-pressure municipal fresh water supply lines (maximum 100 PSI) and water temperatures not exceeding 180°F (82°C). Never connect these fittings to the high-pressure solution discharge side of a truckmount or portable pump, as catastrophic fitting failure and severe scalding may result. Do not restrict or dead-head flow on single-lever mixer faucets while hot water is open, as pressure differentials can force hot water backward into the cold plumbing line. Always verify leak-free operation before leaving the sink area and shut off the faucet valve immediately upon completing extraction.
|