

Clean Storm SBM100GL, Live Hose Reel with 100 ft 3/8 in Hot Water Transfer Hose Powder Coated Steel for Carpet Cleaning Supply
Description
Transfer hot water continuously from a sink supply to a portable carpet extractor with this 100 ft live hose reel and 3/8 in ID hot water hose. Designed for mobile technicians and floor care operators, the Clean Storm SBM100GL feeds water through a live swivel so you never have to unreel or disconnect the hose during operation. It includes a 100 ft Clean Storm Auto Fill hot water garden hose rated to 200 degrees with an 800 psi burst rating and a 90 degree fitting, adapted with a 3/8 in MIP connection to thread directly into the reel center hub for systems under 3.5 GPM.
Features
- Live external swivel design allows continuous water flow while keeping the hose wound on the reel
- Heavy-duty powder-coated steel construction provides corrosion resistance and long-term structural durability (colors not guaranteed)
- Flared flanges maximize hose wrap capacity while rolled beaded edges protect hands and hose jackets
- Solid center core delivers high torsional strength under tension and daily jobsite handling
- Posi-Pin lock mechanism prevents unwanted dereeling during transport or storage
- Includes 100 ft of 3/8 in ID hot water garden hose with a 90 degree fitting and 3/8 in MIP hub connection rated to 200 degrees and 800 psi burst
Applications
- Carpet cleaning operations connecting customer kitchen or bathroom sink hot water supplies to extractors
- Mobile setups where technicians keep portable carpet cleaning machines outside in a vehicle or van
- Low-flow water transfer systems operating under 3.5 gallons per minute
- Floor or wall mounting inside vans, van doors, utility bays, or between vacuum hose reels
Includes the following hose:
Specifications
| Model / SKU |
SBM100GL |
| Brand |
Clean Storm |
| Reel Type |
Live hose reel with external live swivel |
| Reel Material & Finish |
Heavy-duty powder-coated steel (colors not guaranteed) |
| Inlet / Outlet Thread |
3/8 in threaded inlet/outlet (1/2 in inlet/outlet model available separately) |
| Included Hose Connection |
100 ft x 3/8 in ID hot water garden hose with 90 degree fitting and 3/8 in MIP reel hub thread |
| Empty Reel Pressure Rating |
4000 PSI |
| Empty Reel Temperature Rating |
225 degrees F |
| Included Hose Temperature Rating |
200 degrees F |
| Included Hose Burst Rating |
800 PSI |
| Flow Rate Suitability |
Under 3.5 gallons per minute (GPM) |
| Hose Capacity |
100 ft of 3/8 in single wire braided hose or 160 ft of 1/4 in single wire braided hose |
| Core Width |
8.7 in |
| Flange Width |
12.2 in |
| Flange Diameter |
10.5 in |
| Overall Height |
13.0 in |
| Mounting Options |
Floor mount or wall mount (fits between vacuum hose reel or on van door) |
| Optional Lead Hose |
15 ft machine-to-reel hose (optional $45.00 when specified at ordering) or 3/8 in MIP x 10 ft x 3/8 in ID 200 psi hot water hose x 3/4 in male garden hose assembly |
Cross-Reference SKUs
| SBM100GL |
| Clean Storm SBM100GL |
| CleanStorm SBM100GL |
| SBM-100GL |
| SBM 100GL |
| 20220406 |
| Clean Storm 20220406 |
Tips and Additional Information
Before installation, inspect the reel frame, flanges, Posi-Pin lock, external live swivel, and hose jacket for shipping damage or wear, and verify that all 3/8 in MIP and swivel threads are clean and free of debris. Use appropriate thread sealant compatible with hot water on tapered pipe threads without obstructing internal passages, and ensure floor or wall mounting hardware is anchored securely to support dynamic pulling forces in a moving vehicle or shop. Because this is a live reel rather than a non-live reel, water pressure remains routed through the live swivel so you can draw hot water from a sink without unspooling the entire 100 ft length; if you need a supply lead from the reel to your machine (commonly around 15 ft), specify it at the time of ordering.
Frequently Asked Questions
Q: What does live reel mean compared to a non-live reel?
A: A live reel routes water through a live swivel so hot water can flow continuously through the hose while it stays on the reel, eliminating the need to disconnect or fully unreel the hose before use.
Q: Is a hose connecting the reel to the carpet cleaning machine included?
A: No, a machine-to-reel jumper hose is not included at the base price; customers commonly request about 15 ft as an optional $45.00 add-on specified at the time of ordering (an optional 3/8 in MIP x 10 ft x 3/8 in ID 200 psi hot water hose with 3/4 in male garden hose assembly is also referenced).
Q: Can I choose the exact color of the powder-coated steel reel?
A: No, reel colors are not guaranteed.
Q: What flow rate and temperature limits apply to this setup?
A: It is intended for machines using under 3.5 GPM, with the included 3/8 in ID hot water garden hose rated to 200 degrees F (800 psi burst) and the empty reel rated up to 4000 PSI and 225 degrees F.
Warranty & Safety Information
Warranty coverage details depend on manufacturer and distributor terms at purchase; improper installation, exceeding pressure or temperature ratings, using incompatible fluids or flow rates above 3.5 GPM, unauthorized modifications, or neglecting routine swivel and hose maintenance can void coverage. Never exceed the 200 degrees F temperature rating or 800 psi burst rating of the included 3/8 in hot water hose (or the 4000 PSI / 225 degrees F rating of the empty reel), and relieve line pressure before servicing fittings or swivels. Hot water poses scalding hazards, pressurized lines can whip or spray if fittings loosen, and moving vehicles require secure mounting and engagement of the Posi-Pin lock to prevent unintended dereeling or trip hazards.
Optional
|