DriStorm AOne-90L CT-180 Industrial LGR Dehumidifier
105 Pint AHAM | 225 Pint Maximum Crossover Rating | 120 Volt | Automatic Pump-Out
The DriStorm AOne-90L CT-180 is a heavy-duty commercial low-grain refrigerant (LGR) dehumidifier designed for professional water damage restoration, flood cleanup, structural drying, and commercial moisture removal.
This industrial dehumidifier combines advanced refrigeration technology, a two-stage evaporator system, automatic condensate pump-out, programmable electronic controls, and a durable rotomolded polyethylene housing.
The DriStorm AOne-90L is advertised at 105 pints per day at AHAM conditions (80°F and 60% RH). Associated crossover models advertise maximum water removal of 225 pints per day at 90°F and 90% RH. The 225-pint crossover rating has not been independently verified for this DriStorm-branded configuration.
Product Specifications
| Manufacturer |
DriStorm |
| Model |
AOne-90L / CT-180 |
| Dehumidifier Type |
Industrial LGR Refrigeration |
| AHAM Water Removal |
105 Pints/Day at 80°F / 60% RH |
| Maximum Crossover Rating |
225 Pints/Day at 90°F / 90% RH |
| Original CT-180 Rating |
180 Pints/Day |
| Voltage |
115-120V AC, 60Hz |
| Rated Current |
7.5 Amps |
| Maximum Airflow |
410 CFM |
| Refrigerant |
R410A |
| Condensate Pump |
Automatic with Manual Purge |
| Drain Hose |
30 Feet |
| Power Cord |
25 Feet, 3-Wire |
| Dimensions |
21" W x 20" L x 32.5" H |
| Weight |
Approximately 97-100 lbs |
| Housing |
Rotomolded Polyethylene |
| Defrost |
Hot-Gas Bypass |
| Operating Temperature |
33-105°F Advertised |
| Stackable |
Yes - Up to 2 Units |
| Controls |
Programmable LED |
| Certification |
C-ETL-US |
| Warranty |
1 Year / 5 Year Prorated Housing |
Understanding Dehumidifier Water Removal Ratings
Commercial dehumidifiers are advertised using different temperature and humidity testing conditions.
105 Pints Per Day AHAM: Approximately 13.13 gallons of moisture removal per day at 80°F and 60% relative humidity. This standardized rating is useful when comparing commercial dehumidifiers.
225 Pints Per Day Maximum Crossover Rating: Associated crossover models advertise up to 28.125 gallons of water removal per day at 90°F and 90% relative humidity. This rating has not been independently confirmed for the DriStorm AOne-90L configuration.
Original CT-180 Rating: The original CT-180 product literature advertises 180 pints per day at saturation. The precise testing conditions should be confirmed with the manufacturer.
Actual moisture removal depends on temperature, relative humidity, airflow, moisture availability, and operating conditions.
Professional Restoration Features
- Advanced LGR Technology: Designed for professional structural drying and commercial moisture removal.
- Two-Stage Evaporator System: Processes humid air through multiple cooling stages to improve moisture removal.
- 410 CFM Maximum Airflow: Moves humid air through the refrigeration system.
- Automatic Condensate Pump: Discharges collected water through the supplied 30-foot drain hose.
- Manual Pump Purge: Allows technicians to discharge accumulated condensate before transporting equipment.
- Hot-Gas Defrost: Helps manage frost accumulation during operation in cooler environments.
- Rotomolded Housing: Durable, corrosion-resistant construction for demanding restoration job sites.
- Stackable Design: Allows up to two units to be stacked according to manufacturer instructions.
- 120-Volt Operation: Operates from a properly rated grounded electrical circuit.
- Programmable Controls: Electronic LED control panel with adjustable humidity settings.
DriStorm AOne-90L Product Photographs
The following photographs show the AOne-90L dehumidifier housing, wheels, transport handle, airflow openings, and electronic control panel. Product color may vary.
Dehumidifier Side View
Industrial LGR Dehumidifier
Rear View and Hose Storage
Front Air Intake and Housing
Electronic Control PanelFactory Manuals and Technical Documents
Download the available factory instructions, operating information, and replacement parts diagrams.
These documents include operating instructions, electronic control information, maintenance procedures, and replacement parts references.
Electronic Controls and Condensate Pump Operation
The DriStorm AOne-90L features an electronic control panel with adjustable humidity settings, operating indicators, and manual condensate pump operation.
The control panel includes:
- P Button: Manual condensate pump discharge.
- T Button: Operating time information.
- Humidity Adjustment: Increase or decrease the desired humidity setting.
- Running Indicator: Displays equipment operating status.
- Purge Indicator: Shows when the condensate pump is operating.
- Defrost Indicator: Displays automatic defrost operation.
The factory operating instructions also describe diagnostic fault codes for temperature sensors, humidity sensors, refrigeration system operation, and condensate drainage problems.
Refer to the factory operation manual for complete control panel instructions and troubleshooting.
DriStorm Dehumidifier Videos
Watch the following videos for additional equipment information and demonstrations.
Video 1 - DriStorm Dehumidifier Information
Video 2 - Industrial Dehumidifier Demonstration
Recommended Accessory - Dehumidifier Drip Tray
Help Protect Customer Floors from Unexpected Water Leaks.
Even properly functioning restoration dehumidifiers can occasionally release water because of condensate pump problems, clogged discharge hoses, loose connections, or residual condensation.
A properly sized drip tray provides secondary water containment beneath the dehumidifier.
Shop Dehumidifier Drip Trays and Floor Protection Pans
Select a tray that accommodates the equipment footprint and allows proper airflow and equipment stability.
Why Do Restoration Dehumidifiers Leak Water?
One frequently overlooked cause of water leaks is improper equipment shutdown and transportation.
After a refrigeration dehumidifier is turned off, cold evaporator coils may continue releasing condensation into the collection reservoir.
If the technician immediately purges the pump, unplugs the machine, and loads it into the truck, additional water may accumulate in the reservoir.
During transportation, this water can splash into the lower equipment housing and later leak onto the floor at the next job site.
Restoration Technician Tip: Turn dehumidifiers off first, but leave the electrical power and condensate discharge hoses connected while loading other restoration equipment, when permitted by the manufacturer's instructions.
Perform one final condensate pump purge before disconnecting and loading the dehumidifiers last.
Read: Why Restoration Dehumidifiers Leak Water - Causes and Prevention
Commercial and Restoration Applications
- Residential water damage restoration
- Commercial flood cleanup
- Structural drying after plumbing leaks
- Water-damaged wall and floor drying
- Construction drying
- Basement moisture removal
- Commercial building moisture control
- Restoration equipment rental fleets
- Warehouse and storage area dehumidification
Optional Equipment and Accessories
DriStorm Dehumidifier Booster Amplifier 20181009
Optional equipment designed to raise discharge air temperature and reduce relative humidity for compatible structural drying applications.
View DriStorm Booster Amplifier
DriStorm CSF382 Ducting - 8 Inch x 15 Feet
Optional ducting for compatible restoration and ventilation equipment.
View DriStorm CSF382 Ducting
Extra Large Industrial Dehumidifier Rental - San Antonio
Commercial LGR dehumidifier rental equipment for local restoration applications.
View Industrial Dehumidifier Rental
Related Models and Industry Cross References
The following model numbers appear in current or historical industry listings associated with similar commercial LGR dehumidifiers.
CT-180, CT-180 XL, CT-18B, AOne-90L, G7300190, 2PACD200, Damp2Dry, B01LYAF57A, BlueDri BD-130, BD-BD-130-BL, 3345, VG-2200, VG-200, VD-85L, LGR 2200, 6000Li, DP-LGR6000-EA, R175, 7000XLi, F412, R1R, 70401, B-Air LGR Commercial, B-Air Vantage VG-2200 LGR.
These numbers are provided for product research and comparison. They do not establish identical specifications, parts compatibility, or interchangeability between manufacturers.
Shipping and Product Information
Freight Included
The DriStorm AOne-90L CT-180 is a commercial restoration dehumidifier designed for professional moisture removal applications.
Manufacturer: DriStorm
Model: AOne-90L / CT-180
Voltage: 115-120V AC
AHAM Rating: 105 Pints Per Day
Maximum Crossover Rating: 225 Pints Per Day
Airflow: Up to 410 CFM
Condensate Removal: Automatic Pump-Out
Housing: Rotomolded Polyethylene
Important: Order by part number, not image. Manufacturer reserves the right to change specifications, components, design, or color without notice. Do not freeze.
DriStorm AOne-90L CT-180 Industrial LGR Dehumidifier
105 Pint AHAM | 225 Pint Maximum Crossover Rating | 120 Volt | Automatic Pump-Out
The DriStorm AOne-90L CT-180 is a heavy-duty commercial low-grain refrigerant (LGR) dehumidifier designed for professional water damage restoration, flood cleanup, structural drying, and commercial moisture removal.
The CT-180 features a durable rotomolded polyethylene housing, advanced two-stage evaporator design, automatic condensate pump, programmable electronic controls, and hot-gas defrost.
The DriStorm is advertised at 105 pints per day at AHAM conditions (80°F / 60% RH). Associated crossover models advertise maximum water removal of 225 pints per day at 90°F / 90% RH. The 225-pint figure has not been independently verified for this DriStorm-branded configuration.
Product Specifications
| Manufacturer |
DriStorm |
| Model |
AOne-90L / CT-180 |
| Dehumidifier Type |
Industrial LGR Refrigeration |
| AHAM Water Removal |
105 Pints/Day at 80°F / 60% RH |
| Maximum Crossover Rating |
225 Pints/Day at 90°F / 90% RH |
| Original CT-180 Rating |
180 Pints/Day |
| Voltage |
115-120V AC, 60Hz |
| Rated Current |
7.5 Amps |
| Maximum Airflow |
410 CFM |
| Refrigerant |
R410A |
| Condensate Pump |
Automatic with Manual Purge |
| Drain Hose |
30 Feet |
| Power Cord |
25 Feet |
| Dimensions |
21" W x 20" L x 32.5" H |
| Weight |
Approximately 97 lbs |
| Housing |
Rotomolded Polyethylene |
| Defrost |
Hot-Gas Bypass |
| Operating Temperature |
33-105°F Advertised |
| Stackable |
Yes - Up to 2 Units |
| Controls |
Programmable LED |
| Certification |
C-ETL-US |
| Warranty |
1 Year / 5 Year Prorated Housing |
Understanding Dehumidifier Water Removal Ratings
Commercial dehumidifiers are commonly advertised using different temperature and humidity test conditions.
AHAM Rating - 105 Pints Per Day:
Measured at 80°F and 60% relative humidity. This is approximately 13.13 gallons per day and provides a useful standardized comparison between commercial dehumidifiers.
Maximum Crossover Rating - 225 Pints Per Day:
Associated crossover models advertise up to 225 pints (28.125 gallons) per day at 90°F and 90% relative humidity. This rating is provided for comparison and has not been independently confirmed for the DriStorm AOne-90L.
Original CT-180 Rating - 180 Pints Per Day:
The original CT-180 product literature also advertises 180 pints per day. The precise test conditions for this rating should be confirmed with the manufacturer.
Actual moisture removal depends on temperature, relative humidity, airflow, moisture availability, and operating conditions.
Professional Restoration Features
- Advanced LGR Technology: Designed for professional structural drying and low-humidity restoration environments.
- Two-Stage Evaporator System: Processes humid air through multiple cooling stages to improve moisture removal.
- 410 CFM Maximum Airflow: Moves humid air through the refrigeration system for moisture removal.
- Automatic Condensate Pump: Discharges collected water through the 30-foot drain hose.
- Manual Pump Purge: Allows technicians to rem
English
French
Spanish
German
Italian
Portuguese
