SS18 for only $111.94 - Steambrite's price on the Air Duct Brushes & Attachments - SS18 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Heat Seal Equipment SS18 Scorpion Reverse Blast Drier Vent Spinning Brush – 4" to 6" Round Ducts

Part Number: SS18

The Heat Seal Equipment SS18 Scorpion Reverse Blast Spinning Brush is designed for aggressive dryer vent and round duct cleaning when standard air whips, skipper balls, or blast nozzles are not strong enough. This tool uses reverse-blast air movement and rotating bristles to help break loose baked-on lint, packed debris, and stubborn buildup in 4" to 6" round ductwork.

Best Used For

• Heavy dryer vent lint removal
• Dried-on or baked-in duct debris
• Round duct cleaning from 4" to 6"
• Jobs where standard air whips or blast balls are not aggressive enough
• Pulling loosened debris back toward the operator with reverse air blast action

Key Features

• Reverse blast design: Blows air backward to help move debris toward the access point.
• Spinning brush action: Bristles rotate like helicopter blades to scrub and agitate the duct wall.
• Aggressive cleaning: Ideal for difficult dryer vent lint and packed debris.
• Quick disconnect included: Ready to connect to compatible Scorpion rod and snake systems.
• Improved design: Built for more torque and better spinning performance.
• Replacement bristles available: Helps extend tool life.

Specifications

How It Works

The SS18 uses compressed air to spin the brush while the reverse blast air jets push debris back toward the operator. This makes it useful when cleaning dryer vents or round duct runs where lint has become packed, dried, or baked onto the duct wall.

Important Compatibility Notes

• This tool is for 4" to 6" round ducts only.
• Requires at least 100 PSI and approximately 12 CFM air supply.
• Can only be used with compatible Scorpion rods and Scorpion snake systems.
• Not recommended as a substitute for manual inspection when ducts are crushed, disconnected, blocked, or damaged.

When To Choose This Tool

Use the SS18 when a regular skipper ball, air whip, or reverse blast nozzle will not fully remove the buildup. The spinning bristles provide added mechanical agitation, while the reverse air flow helps move lint and debris back toward the opening for removal.

Common Questions

Will this work in square or rectangular duct?

No. This tool is intended for 4" to 6" round duct only.

Does this push debris forward or pull debris back?

This is a reverse blast tool. It blows backward to help bring loosened debris back toward the operator.

Can I use this with any air duct cleaning rod?

No. The SS18 is designed for use with Scorpion rods and snake systems only.

Is this more aggressive than a standard air whip?

Yes. The spinning bristles add mechanical brushing action for tougher lint and debris removal.

Suggested Related Items

• Replacement SS18 bristles / tentacles
• Scorpion dryer vent snake
• Reverse blast skipper balls
• Air duct cleaning hose assemblies
• Forward and reverse blast nozzle assemblies

Note: Specifications and factory design may change without notice. Confirm air supply, duct size, and tool compatibility before ordering.

• This new tool for the Scorpion System is used when super aggressive brushing is required.
• Perfect for dried on, baked in hard drier vent lint.
• Works only in round duct 4 to 6".
• Needs a minimum of 175 psi to operate
• Includes Quick Disconnect
• blows in reverse.
• Bristles act like helicopter blades and help push debris back towards you.
• When standard whips and blast blower balls will not clean, this is the tool to try.
• Replacement bristles available.
• 12 cfm.

Can be used on related items from Nikro, Heat Seal, Clean Storm, Air Care, Scorpion rods and snake.

Improved Design, more torque

Optional

Heat Seal Equipment: Flexible Duct 4" Ball  Lifts the nozzle off the bottom of the duct to improve spinning!