

HydraMaster 000-038-091 Alfa AXP14 Coolant Heat Exchanger – CDS 4.8 SV Truckmount
Genuine HydraMaster Replacement Heat Exchanger
Manufacturer: HydraMaster
Part Number: 000-038-091
Manufacturer Description: HEAT EXCHANGER, ALFA AXP14
Equipment Application: HydraMaster CDS 4.8 SV
Component Type: Coolant Heat Exchanger
Factory Parts Diagram Reference: Item 7
Product Description
The HydraMaster 000-038-091 Alfa AXP14 Heat Exchanger is a replacement coolant heat exchanger used in the HydraMaster CDS 4.8 SV truckmounted carpet cleaning system.
This heat exchanger is part of the equipment's coolant heat recovery system. It transfers thermal energy between separate fluid circuits, allowing heat generated during machine operation to be recovered for use by the cleaning system.
The Alfa AXP14 heat exchanger helps support the truckmount's water heating system by recovering available engine coolant heat.
Equipment Compatibility
- HydraMaster CDS 4.8 SV truckmount carpet cleaning system
- HydraMaster coolant heat exchanger assembly using part number 000-038-091
- Other HydraMaster equipment specifically identifying 000-038-091 in the factory parts documentation
Important: HydraMaster manufactures multiple heat exchanger designs. Verify the original equipment part number before ordering.
HydraMaster CDS 4.8 SV Coolant Heat Exchanger Assembly
The HydraMaster factory parts diagram identifies 000-038-091 as Item 7 in the CDS 4.8 SV coolant heat exchanger assembly.
Additional components identified in the same factory assembly include:
| Part Number |
Factory Description |
| 000-038-091 |
Alfa AXP14 Heat Exchanger |
| 000-015-1380 |
Alfa AXP14 Heat Exchanger Hold-Down Bracket |
| 000-015-1379 |
Alfa AXP14 Heat Exchanger Mounting Bracket |
| 000-052-951 |
3/4-Inch FPT x 3/8-Inch FPT Brass Adapter |
| 000-052-779 |
3/8-Inch NPT x 3/8-Inch Male JIC 37-Degree Elbow |
| 000-052-733 |
Modified 3/4-Inch NPT Street Elbow |
| 000-068-1053 |
3/8-Inch ID Clear Hose, 24 Inches Long |
| 000-052-950 |
Brass Insert #F1212 |
Note: The components listed above are identified in the factory assembly. They are not necessarily included with the purchase of heat exchanger 000-038-091.
Common Reasons for Heat Exchanger Replacement
Truckmounted carpet cleaning equipment operates under demanding conditions involving engine heat, coolant circulation, and continuous cleaning water demand.
Heat exchanger replacement may become necessary because of:
- Internal leakage between heat exchanger fluid circuits
- External coolant or water leakage
- Restricted internal passages caused by contamination or deposits
- Reduced heat transfer performance
- Physical damage to the heat exchanger
- Corrosion or deterioration of internal components
Before replacing the heat exchanger, inspect the associated coolant hoses, fittings, mounting brackets, and fluid circuits to determine the cause of the problem.
Installation and Service Information
Installation should be performed by a qualified technician familiar with HydraMaster truckmounted cleaning equipment.
- Allow the engine and coolant system to cool before servicing.
- Relieve system pressure before disconnecting fluid lines.
- Inspect mounting brackets and connecting fittings.
- Check hoses for deterioration or restrictions.
- Follow the factory procedures for coolant filling and air removal.
- Inspect all connections for leaks after installation.
Important Ordering Information
Order by manufacturer part number, not by image. Product appearance, fittings, and specifications may change without notice. The manufacturer reserves the right to modify product design and specifications.
Do not freeze. Protect water-containing equipment components from freezing temperatures.
HydraMaster Replacement Parts
Steam-Brite supplies replacement parts for professional truckmounted carpet cleaning equipment, including HydraMaster heat exchangers, coolant system components, hoses, fittings, pumps, and related service parts.
Manufacturer: HydraMaster
OEM Part Number: 000-038-091
Product: Alfa AXP14 Coolant Heat Exchanger
All HYDRAMASTER ORDERS ARE FINAL, NON-CANCELLABLE, NO REFUNDS!
The factory identifies two (not included) specific brackets used with this heat exchanger:
000-015-1379 — Alfa AXP14 Heat Exchanger Mounting Bracket
000-015-1380 — Alfa AXP14 Heat Exchanger Hold-Down Bracket
|