

HydraMaster 000-079-220 Automatic Wastewater Disposal System (AWDS)
Heavy-Duty 8 GPM External Truckmount Waste Pump-Out Kit
The HydraMaster 000-079-220 Automatic Wastewater Disposal System (AWDS) is a heavy-duty external waste pump-out system designed for professional truckmounted carpet cleaning machines, tile cleaning equipment, and water extraction applications.
This automatic pump-out system allows operators to discharge recovered wastewater while continuing to clean, reducing interruptions caused by full recovery tanks.
The HydraMaster AWDS features a high-capacity diaphragm pump, oversized valves, and a powerful gear motor designed for demanding commercial cleaning applications.
Key Features and Benefits
- 8 GPM Pumping Capacity: Designed for rapid wastewater removal.
- Automatic Operation: A float switch monitors the recovery tank water level and activates the pump as needed.
- 1/6 HP Gear Motor: Low-amperage motor designed for efficient operation.
- Oversized Check Valves: Designed to accommodate debris commonly encountered in carpet cleaning and water extraction applications.
- Low-Torque Bearings: Designed to improve pumping efficiency while minimizing electrical demand.
- External Mounting: Allows convenient access for inspection, cleaning, and maintenance.
- Preassembled and Prewired: Simplifies installation compared with systems requiring extensive field assembly.
- Heavy-Duty Construction: Rugged powder-coated mounting base.
- Reduced Downtime: Helps prevent interruptions caused by full wastewater recovery tanks.
- Commercial Applications: Suitable for professional carpet cleaning, upholstery cleaning, hard-surface cleaning, and water extraction equipment.
Product Specifications
| Manufacturer |
HydraMaster |
| Manufacturer Part Number |
000-079-220 |
| Product Type |
Automatic Wastewater Disposal System (AWDS) |
| Pump Design |
Heavy-Duty Diaphragm Waste Pump |
| Rated Flow |
8 Gallons Per Minute (GPM) |
| Motor |
1/6 HP Gear Motor |
| Mounting |
External / Floor Mount |
| Required Floor Space |
Approximately 1.5 Square Feet |
| Operation |
Automatic Float-Switch Controlled |
| Installation |
Preassembled and Prewired Kit |
| Primary Application |
Truckmount Wastewater Recovery Tank Pump-Out |
Important: Actual pumping performance depends on installation, hose length, discharge elevation, wastewater conditions, and system configuration.
How the Automatic Waste Pump-Out System Works
During normal carpet cleaning or water extraction operations, wastewater accumulates inside the truckmount recovery tank.
When the wastewater reaches the predetermined level, the float switch activates the automatic pump-out system. The diaphragm pump transfers wastewater from the recovery tank through the discharge hose to an approved disposal location.
Once the wastewater level drops, the float switch shuts off the pump automatically.
This process allows operators to continue cleaning without repeatedly stopping to manually drain the recovery tank.
Compatible Equipment and Applications
The HydraMaster 000-079-220 is designed for installation on HydraMaster truckmounts and may be adapted for use with other compatible truckmounted cleaning machines.
Potential applications include equipment manufactured by:
- HydraMaster
- Prochem
- Sapphire Scientific
- BlueLine
- Blue Baron
- MasterBlend
- Avenger
- Other compatible truckmount cleaning systems
Compatibility Notice: Installation on equipment other than the original intended HydraMaster application may require additional plumbing, electrical connections, mounting hardware, or modifications. Verify compatibility before ordering.
Related and Historical Part Number References
The following part numbers have been associated with Comet-style automatic waste pump-out systems, replacement pumps, or related equipment.
- HydraMaster: 000-079-220
- Comet: P33T
- Comet: PT33
- Blue Baron: 6130.0001.00.C
- Prochem: 66-945533
- Prochem: PP66-945533
- Prochem: 8.633-597.0
- Sapphire Scientific: 68-003
- Sapphire Scientific: 68-158S
Cross-Reference Disclaimer: These numbers are provided for product research and identification. They do not guarantee that every listed pump, motor, or complete assembly is directly interchangeable. Compare electrical requirements, mounting dimensions, plumbing connections, and installation requirements before purchasing.
What's Included?
The HydraMaster 000-079-220 automatic wastewater disposal kit is supplied as a preassembled pump-out system.
The existing product listing identifies the following components:
- Heavy-duty automatic waste pump assembly
- Float switch for automatic operation
- Installation hoses
- Hose clamps
- Associated installation hardware
Note: Exact kit contents and supplied hardware may vary with factory production changes. Additional installation materials may be required for non-HydraMaster equipment.
Important Installation and Maintenance Information
Wastewater Filtration Required: All automatic wastewater pump-out systems should be used with an appropriate vacuum hose-mounted lint and debris filter system.
Removing lint, carpet fibers, hair, and other debris before they enter the recovery tank helps reduce pump clogging, valve damage, and premature component wear.
Although the pump features oversized valves designed to accommodate debris, it should not be operated as a substitute for proper wastewater filtration.
Recommended Optional Filtration Accessories:
- HydroForce AC10CLEAR Transparent Truckmount Vacuum Hose Lint Filter
- Clean Storm 20140212 40-Mesh Inline Water Filter, 1-inch FIP Connections
Inspect and clean filters regularly. Protect the pump and associated plumbing from freezing temperatures.
Install the discharge hose to prevent kinks, restrictions, and accidental wastewater spills.
Wastewater Disposal: Recovered wastewater must be discharged only into an approved sanitary wastewater disposal system in accordance with applicable local regulations. Do not discharge contaminated wastewater into storm drains, streets, or natural waterways.
Manufacturer Information
View the HydraMaster Automatic Wastewater Disposal System Factory Product Information Sheet (PDF)
Warranty Information
Manufacturer warranty coverage applies to qualifying defects in materials or workmanship, subject to the manufacturer's current warranty terms and exclusions.
Damage caused by freezing, improper installation, lack of filtration, excessive debris, misuse, or inadequate maintenance may not be covered.
Important Ordering Information
ALL HYDRAMASTER ORDERS ARE FINAL, NON-CANCELLABLE, AND NON-REFUNDABLE.
Please verify the manufacturer part number and compatibility with your equipment before placing an order.
Factory specifications, components, appearance, and availability are subject to change without notice.
-
Kit includes heavy duty pump, Float switch, hoses, and clamps.
|
All diaphragm pumps are backed by a one year manufactures warranty on manufacturing defects in the pump.
This exclude maintenance and abuse. In other words, if you let it freeze or clog it up with mud and dirt because you do not filter the water, it is not covered.
ALL AUTOMATIC PUMP OUT SYSTEMS REQUIRE THE USE OF A VACUUM HOSE MOUNT FILTER SYSTEM
HydraMaster 000-079-220 Comet P33T Automatic Waste Pump-Out Assembly
8 GPM Automatic Wastewater Disposal System for Truckmount Carpet Cleaning Machines
The HydraMaster 000-079-220 Automatic Wastewater Disposal System (AWDS) features a Comet P33T waste pump designed to automatically remove recovered wastewater from compatible truckmounted carpet cleaning machines.
Searching for Comet P33T? If your existing truckmount wastewater pump has P33T stamped on the pump motor, you may have located this product by searching for the identification printed on your original equipment.
HydraMaster identifies the complete automatic wastewater disposal assembly by factory part number 000-079-220. Verify the pump specifications and assembly configuration before ordering.
|