000-150-174 for only $1,143.00 - Steambrite's price on the Truck Mount Accessories - 000-150-174 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

HydraMaster 000-150-174 Universal Driveshaft 39"–44" for Chevy Vans – CDS Truckmount

HydraMaster Part Number: 000-150-174
Manufacturer: HydraMaster
Factory Description: DRIVESHAFT UNVRSL 39-44 2014-
Product Type: Universal Driveshaft Assembly
Application: HydraMaster Clutch Drive System (CDS)
Vehicle Application: Select Chevrolet/GMC van installations
Driveshaft Length: 39"–44" (factory designation)

Product Description

The HydraMaster 000-150-174 Universal Driveshaft is a replacement driveline component used in select HydraMaster Clutch Drive System (CDS) truckmounted carpet cleaning equipment installations.

This driveshaft is identified by HydraMaster as a 39"–44" universal driveshaft for applicable 2014 and newer CDS configurations.

The driveshaft is part of the mechanical power transmission system that transfers rotational power from the vehicle's CDS drive arrangement to the truckmounted cleaning equipment.

Product Specifications

Manufacturer	HydraMaster
Part Number	000-150-174
Factory Description	DRIVESHAFT UNVRSL 39-44 2014-
Length Designation	39 to 44 inches
Equipment Type	CDS Truckmounted Carpet Cleaning Systems
Vehicle Application	Select Chevrolet/GMC Vans
Installation	Professional installation recommended

HydraMaster CDS Compatibility

This driveshaft is referenced in HydraMaster CDS 4.8 factory documentation.

The CDS system uses the vehicle engine as the power source for the truckmounted carpet cleaning equipment. The driveshaft forms part of the driveline assembly connecting the vehicle drive system to the cleaning equipment.

Important: Not every Chevrolet or GMC van uses the same driveshaft. Vehicle model, model year, CDS configuration, mounting arrangement, and driveline dimensions must be verified before ordering.

Factory Parts Diagram and Owner's Manual

HydraMaster identifies this driveshaft in the CDS 4.8 Owner's Manual.

See Figure 7-11: CDS Front End Assembly – Chevy for the factory exploded-view illustration showing the driveshaft and surrounding mounting components.

View HydraMaster CDS 4.8 Factory Owner's Manual (PDF)

The factory illustration is useful for identifying the driveshaft's position within the complete CDS front-end assembly.

Installation and Replacement Considerations

Before replacing a HydraMaster CDS driveshaft, inspect the complete driveline assembly and verify that the replacement part matches the original installation.

• Confirm the original HydraMaster part number.
• Verify the required driveshaft operating length.
• Inspect universal joints for wear or excessive movement.
• Inspect driveline mounting hardware and support components.
• Check driveline alignment according to factory specifications.
• Verify proper clearance throughout the driveline installation.
• Follow HydraMaster factory installation and safety procedures.

Safety Notice: Incorrect driveshaft length, alignment, or installation can cause vibration, premature component failure, and equipment damage. Installation should be performed by a qualified technician.

Before Ordering

If you are uncertain whether HydraMaster 000-150-174 is the correct driveshaft for your truckmount, compare the part number with your existing component and the factory CDS parts documentation.

Vehicle year alone does not establish compatibility. Confirm the exact CDS configuration before purchase.

Ordering Note: This listing is for HydraMaster part number 000-150-174. Other components illustrated in factory exploded-view diagrams are shown for identification purposes and are not included unless specifically stated.