

Injectidry AC8397 Protect-It Dehumidifier Drip Tray - 7 Gallon Water Containment
Injectidry Protect-It Dehumidifier Drip Tray - Part Numbers AC8397 / 55349 
Protect your customer's floors from unexpected dehumidifier water leaks, condensate pump failures, and accidental water discharge with the Injectidry Protect-It Dehumidifier Drip Tray.
Designed for professional water damage restoration contractors, this heavy-duty polyethylene containment pan provides 7 gallons of emergency water collection capacity beneath compatible commercial refrigeration dehumidifiers.
The Protect-It tray features a rigid, corrosion-resistant design, 25" x 25" interior dimensions, and raised support feet that allow air to circulate underneath the containment pan.
Whether your restoration equipment is operating inside a residential home, commercial building, hotel, office, or other occupied structure, the Injectidry Protect-It provides an additional layer of protection against accidental condensate discharge.
Injectidry Protect-It AC8397 Product Specifications
| Manufacturer |
Injectidry Systems |
| Product Name |
Protect-It Dehumidifier Drip Tray |
| Manufacturer Part Number |
AC8397 |
| Additional Part Number |
55349 |
| Water Containment Capacity |
7 Gallons |
| Inside Dimensions |
25" x 25" |
| Construction |
Heavy-Duty Rigid Polyethylene |
| Bottom Design |
Raised Feet for Air Circulation |
| Primary Application |
Secondary Water Containment Under Restoration Dehumidifiers |
| Shipping Classification |
Oversized Rigid Item - Cannot Be Rolled |
Why Use a Drip Tray Under a Restoration Dehumidifier? 
Commercial refrigeration dehumidifiers remove moisture from the air by passing humid air across cold evaporator coils.
As the air temperature drops below its dew point, water condenses on the evaporator coils and drains into a condensate collection system.
Most professional restoration dehumidifiers use an automatic condensate pump to discharge collected water through a drain hose.
Although these systems are designed for continuous operation, unexpected water leaks can occur for several reasons.
Common Causes of Dehumidifier Water Leaks
- Condensate Pump Failure: A malfunctioning pump may fail to discharge collected water.
- Clogged Drain Hose: Dirt, debris, or a kinked condensate discharge hose can prevent water from leaving the machine.
- Float Switch Problems: A stuck or malfunctioning water-level switch can interfere with normal automatic pump operation.
- Loose Drain Connections: Internal hoses and fittings can occasionally loosen or develop leaks.
- Cracked Condensate Reservoir: Physical damage or freezing can cause cracks in water collection components.
- Residual Condensation: Cold evaporator coils may continue dripping water after the dehumidifier has been turned off.
- Transportation-Related Water Spills: Water remaining inside the condensate reservoir can splash into the equipment housing when the dehumidifier is tilted onto its transport wheels.
The Injectidry Protect-It tray provides up to 7 gallons of emergency containment capacity to help collect water from these unexpected situations.
Important: The tray provides secondary containment and does not replace proper condensate drainage, functioning safety switches, or regular equipment inspections.
Prevent Water Damage to Customer Flooring 
Professional restoration contractors frequently operate dehumidifiers on finished flooring surfaces, including:
- Hardwood floors
- Engineered wood flooring
- Laminate flooring
- Luxury vinyl plank flooring
- Ceramic and porcelain tile
- Commercial flooring installations
- Other moisture-sensitive finished surfaces
Even a relatively small amount of unexpected water discharge can create additional cleanup work or damage flooring that was not previously affected.
Placing an Injectidry Protect-It containment pan beneath a compatible dehumidifier helps prevent accidental water discharge from immediately spreading across the surrounding floor.
For restoration companies operating multiple dehumidifiers at unattended job sites, secondary water containment can be a valuable additional precaution.
Raised Feet Allow Airflow Under the Drip Tray
One important feature of the Injectidry Protect-It is its raised support feet.
Unlike containment pans that sit completely flat against the floor, the raised feet provide space for air movement underneath the tray.
This design can be beneficial during structural drying applications where maintaining air circulation around restoration equipment is desirable.
The raised feet do not replace proper air mover placement or established structural drying procedures.
Heavy-Duty Rigid Polyethylene Construction
The Injectidry Protect-It is manufactured from durable polyethylene that resists corrosion and will not rust like steel containment pans.
Its rigid construction provides a stable containment area beneath compatible restoration dehumidifiers.
The 25" x 25" interior dimensions accommodate dehumidifiers with suitable equipment footprints.
Before ordering: Measure the base of your dehumidifier and confirm that it fits within the 25" x 25" interior dimensions.
The equipment must remain level and stable without interfering with the tray's containment walls, drainage connections, or ventilation openings.
Restoration Equipment Tip: Why Dehumidifiers Sometimes Leak After Transportation
One of the most overlooked causes of water leaking from restoration dehumidifiers is the way technicians shut down and transport their equipment.
When a refrigeration dehumidifier is turned off, the evaporator coils may remain cold for an extended period.
Water remaining on these coils can continue dripping into the condensate collection reservoir after the machine has stopped operating.
If the technician immediately purges the condensate pump, disconnects the power cord, and loads the dehumidifier, additional condensation may collect inside the reservoir.
During transportation, this water can splash into the lower equipment housing.
When the dehumidifier is unloaded and placed into operation at the next job site, the trapped water may eventually drain onto the customer's floor.
The technician may believe the dehumidifier has developed a mechanical leak even though the equipment is operating correctly.
Dehumidifier Leaking Water? Read Our Technical Forum Article
Steam-Brite explains why restoration dehumidifiers sometimes leak water, how automatic condensate pumps operate, and how technicians can reduce water spills by changing their equipment shutdown and transportation procedures.
One important recommendation: Turn off dehumidifiers first, but leave their power cords and condensate discharge hoses connected while loading the other restoration equipment, when permitted by the manufacturer's instructions.
Perform one final condensate pump purge before disconnecting and loading the dehumidifiers last.
Why Restoration Dehumidifiers Leak Water: Causes and Prevention
Read the complete restoration equipment troubleshooting article in the Steam-Brite Forum. Opens in a new window.
How to Use the Injectidry Protect-It Dehumidifier Tray
- Select a level, stable location for the dehumidifier and containment tray.
- Verify that the equipment footprint fits within the tray's 25" x 25" interior dimensions.
- Position the Protect-It tray beneath the dehumidifier without obstructing the machine's ventilation openings.
- Connect the condensate discharge hose and route it according to the dehumidifier manufacturer's instructions.
- Inspect the tray periodically for accumulated water.
- If water is found inside the tray, identify and correct the source of the leak.
- Remove collected water before the tray reaches its maximum containment capacity.
Safety Reminder: Never allow accumulated water to contact electrical cord connections, outlets, or energized equipment.
7 Gallons of Emergency Water Containment
The Protect-It tray is designed to contain up to 7 gallons of water.
This emergency capacity can provide additional protection when an unexpected condensate discharge problem occurs.
However, many commercial restoration dehumidifiers can remove considerably more than 7 gallons of moisture during a 24-hour period.
The Protect-It tray is not intended to replace the dehumidifier's automatic condensate pump or serve as its primary wastewater collection system.
Actual available containment capacity may be reduced by equipment displacement or positioning inside the tray.
Important Shipping Information - Oversized Rigid Item
Please note that the Injectidry Protect-It is a rigid polyethylene containment tray.
Unlike flexible drip trays that can be rolled for compact shipping, this product cannot be rolled or folded.
Because of its size and rigid construction, oversized package shipping charges may apply.
Customers purchasing this tray with a commercial dehumidifier or other palletized restoration equipment may benefit from combining the items into a single freight shipment.
|