8.720-559.0 for only $61.88 - Steambrite's price on the Unloaders and Regulators - 8.720-559.0 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Karcher 8.720-559.0 Unloader Valve Rebuild Kit

Landa 83-005650200 | AL 605, AL 606 & AL 607 Unloader Repair Kit

Manufacturer: Karcher / Landa / Legacy / Shark / Hotsy
Karcher Part Number: 8.720-559.0
Original Landa Part Number: 83-005650200
Product Type: High Pressure Washer Unloader Valve Repair Kit

---

Product Description

The Karcher 8.720-559.0 Unloader Valve Rebuild Kit is a replacement repair kit designed for servicing compatible AL 605, AL 606, and AL 607 pressure washer unloader valves.

This repair kit is identified by the original Landa part number 83-005650200 and is used in selected commercial and industrial high-pressure washer applications.

The unloader valve is an important component of a pressure washing system. It regulates system pressure and redirects water flow when the spray gun trigger is released.

Internal unloader components can become worn or damaged through normal operation, potentially causing pressure fluctuations, improper bypass operation, or difficulty maintaining consistent operating pressure.

Rebuilding a serviceable unloader valve with the correct repair kit may restore proper operation without requiring replacement of the complete unloader assembly.

Important: This listing is for the unloader valve repair kit only. The complete unloader valve assembly is not included.

OEM and Previous Part Numbers

The following manufacturer and historical part numbers are associated with this replacement kit:

Part Number	Description
8.720-559.0	Karcher Replacement Part Number
87205590	Karcher Part Number Without Dashes
83-005650200	Original Landa Part Number
AL005650200	OEM / Previous Part Number
783100	OEM / Previous Part Number

Compatible Unloader Valve Models

Karcher repair kit 8.720-559.0 is listed for use with the following unloader valve models:

• AL 605 Unloader Valve
• AL 606 Unloader Valve
• AL 607 Unloader Valve

Version Note: This repair kit is identified for applicable AL 605, AL 606, and AL 607 unloader versions manufactured as of February 1999. Confirm the unloader model and production version before ordering.

Equipment Application

This repair kit is associated with the following high-pressure washer equipment application:

Equipment Manufacturer	Landa
Equipment Model	SEA4-3000C
Equipment Type	High Pressure Washer
Equipment Electrical Rating	380 Volt / 50 Hz
Original Repair Kit Number	83-005650200

Compatibility Notice: Equipment model information is provided as a replacement-parts reference. Verify the installed unloader valve model and manufacturer part number before purchasing.

The 380V / 50Hz specification refers to the pressure washer equipment, not to the mechanical unloader repair kit.

Common Symptoms of Unloader Valve Problems

A pressure washer unloader valve may require inspection or service if the equipment exhibits any of the following symptoms:

• Unstable or fluctuating operating pressure
• Pressure surging during operation
• Difficulty maintaining the correct operating pressure
• Improper bypass operation when the spray gun is released
• Water leakage from the unloader valve
• Internal valve components sticking or failing to move freely
• Excessive wear or damage to internal valve components

These symptoms may also be caused by other pressure washer components, including pump valves, seals, spray nozzles, water supply restrictions, or other plumbing problems. Proper diagnosis is recommended before ordering replacement parts.

Unloader Valve Repair Information

The Karcher 8.720-559.0 repair kit is intended for servicing compatible unloader valves rather than replacing the complete unloader assembly.

Before beginning repairs:

1. Turn off the pressure washer and disconnect its power source.
2. Shut off the water supply.
3. Release all trapped system pressure.
4. Identify the installed unloader valve model.
5. Inspect the valve body for corrosion, cracks, or other damage.
6. Refer to the appropriate manufacturer's service documentation.
7. Replace the applicable components according to the manufacturer's instructions.
8. Reassemble and test the system for proper pressure regulation and leakage.

Safety Warning: High-pressure washer systems can retain dangerous pressure after shutdown. Never disassemble an unloader valve while the system is pressurized. Repairs should be performed by qualified service personnel familiar with high-pressure water equipment.

Manufacturer Parts Diagrams and Documentation

The following reference documents may assist with identifying the unloader valve and its internal components.

Shark Pressure Washer Parts Manual:
View Manufacturer's Exploded Parts Diagram (PDF)

Hotsy 1200 Series Parts Manual:
View Additional Unloader Valve Exploded Diagram (PDF)

Note: Manufacturer diagrams may illustrate the complete unloader assembly, including components that are not supplied with this repair kit. Refer to the applicable parts list to identify the individual service components.

Frequently Asked Questions

Is Karcher 8.720-559.0 the same as Landa 83-005650200?

Yes. Karcher 8.720-559.0 is identified as a replacement repair kit for the original Landa part number 83-005650200.

Will this repair kit fit an AL 605 unloader?

This kit is listed for compatible AL 605 unloaders. Verify the production version and original repair kit number before ordering.

Will this kit fit AL 606 and AL 607 unloaders?

Yes, the kit is also listed for compatible AL 606 and AL 607 unloader valve models.

Does this kit include the complete unloader valve?

No. This product is a repair kit for servicing a compatible unloader valve. It is not a complete replacement unloader assembly.

Can I use this repair kit on a Landa SEA4-3000C pressure washer?

The Landa SEA4-3000C is an identified equipment application for original part number 83-005650200. Confirm that the installed unloader valve uses this repair kit before ordering.

Does the 380V / 50Hz electrical rating affect compatibility?

The voltage and frequency describe the pressure washer's electrical configuration. This repair kit services a mechanical unloader valve. Compatibility is determined primarily by the installed unloader model and the correct repair kit part number.

Ordering Information

Order Part Number: 8.720-559.0
Product: Unloader Valve Rebuild / Repair Kit
Brand: Karcher
Original Landa Number: 83-005650200
Quantity: 1 Repair Kit

Please verify your original part number before ordering. Manufacturer specifications, packaging, and supplied components are subject to change without notice.

---

Search References: Karcher 8.720-559.0, Karcher 87205590, Landa 83-005650200, AL005650200, 783100, AL605 Unloader Repair Kit, AL606 Unloader Repair Kit, AL607 Unloader Rebuild Kit, Landa Pressure Washer Parts, Karcher Unloader Valve Repair Parts, Shark Pressure Washer Unloader Parts, Hotsy Unloader Valve Repair Kit.