Karcher 8.919-115.0 Burner Igniter 230V
OEM Karcher burner igniter for select hot water pressure washer burner systems used across Karcher, Landa, Legacy, Hotsy, and Shark equipment platforms.
| Part Number |
8.919-115.0 |
| Old / Alternate Number |
89191150 |
| Description |
Burner Igniter, 230 Volt |
| GTIN |
4039784572829 |
| Application |
Hot water pressure washer burner ignition systems |
| Brands Commonly Associated |
Karcher, Landa, Legacy, Hotsy, Shark |
Product Overview
The Karcher 8.919-115.0 burner igniter is a 230V ignition component used to help light the burner assembly on compatible hot water pressure washers. This part is commonly found in oil-fired burner systems where reliable ignition is required for proper heat operation.
- OEM replacement burner igniter
- Designed for 230V burner systems
- Used on select Karcher / Landa / Legacy / Hotsy / Shark hot water machines
- Replaces or cross-references old part number 89191150
- Common repair part when the burner fails to ignite
Common Symptoms of a Failed Burner Igniter
- Burner motor runs but fuel does not ignite
- Machine has pressure but no hot water
- Fuel spray is present but no ignition occurs
- Burner cycles but fails to establish flame
- Visible cracked ceramic, burned leads, or damaged igniter tip
Important: Always confirm voltage, machine model, wiring, and burner style before ordering. Display images are for reference only. All purchases are fulfilled by the part number ordered.
Before Replacing the Igniter
A no-heat condition may be caused by more than one burner system issue. Before replacing the igniter, also inspect:
- Fuel filter condition
- Fuel pump output
- Transformer / ignition module
- Burner electrodes and wiring
- Air adjustment and fuel nozzle
- Flow switch, thermostat, pressure switch, and safety controls
Installation Notes
- Disconnect power before servicing burner components.
- Allow heater coil and burner chamber to cool before repair.
- Inspect wiring terminals for heat damage or corrosion.
- Install in the same orientation as the original part.
- Do not force the ceramic body; ceramic ignition components can crack if overtightened.
- Service should be performed by a qualified technician familiar with oil-fired pressure washer burners.
FAQ
Q: Is this the same as 89191150?
A: Yes. 89191150 is listed as an old / alternate part number for Karcher 8.919-115.0.
Q: Is this a 120V or 230V igniter?
A: This listing is for the 230V burner igniter. Verify your machine voltage before ordering.
Q: Will this fix a no-hot-water problem?
A: It may, if the igniter is the failed component. No-heat issues can also be caused by fuel delivery, switches, thermostat, burner transformer, nozzle, electrodes, or wiring.
Q: Does this fit all Karcher / Hotsy / Landa / Shark machines?
A: No. Compatibility depends on the exact machine model and burner assembly. Order by part number whenever possible.
Q: Are product photos exact?
A: Product images are for reference only. Manufacturers may change wire color, terminal style, or small details without notice. The order is fulfilled by the OEM part number listed.
Suggested Related Parts
- Fuel filters
- Fuel pump assemblies
- Burner nozzles
- Ignition transformers / modules
- Terminal blocks and burner wiring parts
Shipping & Warranty Notice
Steambrite processes shipments daily by FedEx, UPS, USPS, and freight carriers. Website availability does not guarantee local warehouse inventory. Special order or factory-supplied parts may require additional lead time.
Warranty: Manufacturer warranty applies to defective parts only. Shipping charges, labor, downtime, diagnostic time, and related damages are not included unless specifically provided by the manufacturer.
Reference: Specifications and appearance are subject to change without notice. Always verify your required part number before ordering.
| 
English
French
Spanish
German
Italian
Portuguese
