Mosmatic DDP 67.459 Dual Car Wash Ceiling Boom 7ft 5inches and 8ft 2inches
Two are better than one
The dual ceiling boom is most efficient when installed in the pre-wash section of a car wash. This is the area where you are most likely to find the boom. The brush wand is usually attached to the upper arm and the high-pressure wand is connected to the lower arm. Also available in hexagon shape or with three arms.
The boom can be endlessly rotated 360° on its axle. The benefit: The user always starts from the same point, so the brush bucket and the wand holder can be mounted on the same side.
Your choice of inlet and outlet points
All Mosmatic ceiling booms are fitted and delivered with a standard G1/4” inner and outer screw thread. We can also fulfil individual requests and offer a variety of thread sizes and types. An additional fitted connection to the fluid supply guarantees maximum freedom of choice and can be adapted to any individual self-service car wash system.
High quality swivels
Top quality ensures a long life! All the internal parts are made of stainless steel. They are maintenance-free and easy turning even under high pressure.
Hose protection / tension relief
During minimum to normal pressure on the boom, special hose protection provides optimal stress relief. In addition to hose protection, the optional tension relief lessens extreme pressure on the boom.
The high-pressure hose housed inside the boom is also protected with insulation against heat and cold.
Polished stainless steel (inox)
A strong and visually elegant design are a priority for all Mosmatic products. We use polished stainless steel (INOX) for all our products protecting them from rust and extreme weather conditions.
Ready to install
All Mosmatic booms are delivered pre-assembled. You can install the booms yourself by following the enclosed instructions. The boom is ready for immediate use after being connected to the media supply.