H373 for only $59.97 - Steambrite's price on the Valves Kits & Repair Parts - H373 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Mytee H373 Solution Manifold for 12-Inch Carpet Wands

The Mytee H373 is a genuine OEM stainless-steel solution manifold designed for select 12-inch carpet cleaning wands with a 1.5-inch wand tube. The manifold distributes cleaning solution across the wand spray jets and is used as a replacement for a damaged, leaking, or worn original manifold.

Replacement Solution Manifold

Replace the H373 when the original wand manifold is cracked, damaged, corroded, leaking, or no longer distributing solution properly to the spray jets.

Important: Order replacement parts by the manufacturer's part number whenever possible. Wands that look similar may use different manifolds, fittings, jet spacing, or mounting configurations. Verify that Mytee H373 is the required part number for your wand before ordering.

Common Application

The H373 is associated with Mytee 12-inch carpet wand applications using a 1.5-inch wand tube. For example, Steam-Brite also offers parts and accessories for the Mytee 8300-EZ 12-Inch Dual-Jet Carpet Wand .

Mytee OEM Description:
Manifold, solution, 12", 1.5" wand.
17-gauge seamed stainless-steel tube with electro-polish finish.

Manufacturer Part Number: H373

Manifold, solution, 12″, 1.5″ Vacuum piped wand

REV. OD; MANIFOLD, SOLUTION, 12″, 1 1/2″ WAND; MATERIAL:  17 GAUGE SEAMED S/S TUBE WITH ELECTRO POLISH

H373

Repairs:

Mytee 8300EZ Carpet Cleaning Wand Black Lightweight Head Dual Jet Stainless Steel 12inch with Freight included [8300-EZ]

⚠️ IMPORTANT — DO NOT ALLOW TO FREEZE

This solution manifold must be protected from freezing temperatures. Water or cleaning solution left inside the manifold can freeze, expand, and split or crack the stainless-steel tubing.

Freeze damage is one of the most common reasons this manifold requires replacement.

Before storing or transporting your carpet cleaning wand in freezing conditions, completely drain the solution system and manifold. Do not leave water or cleaning solution trapped inside the wand.

Damage caused by freezing is not a manufacturing defect and is not covered under warranty.