Mytee LTD3 Speedster Heated Carpet Extractor
The Mytee LTD3 Speedster® is a professional heated carpet cleaning extractor built for cleaners who want high pressure, strong dual-vacuum recovery, onboard heat, and continuous-fill capability in one portable machine.
The LTD3 combines a 500 PSI adjustable Pumptec piston pump , dual 3-stage vacuum motors producing 200 CFM and 130 inches of water lift , and Mytee's 1,600-watt REAL HEAT™ system capable of producing solution temperatures up to 210°F.
Its built-in automatic solution-tank fill and 3.3 GPM automatic pump-out allow the operator to keep cleaning without repeatedly stopping to manually fill and empty the machine.
Mytee LTD3 Key Features
Solution Tank: Approx. 11 gallons
Recovery Tank: Approx. 11 gallons
Pressure: Adjustable to 500 PSI
Solution Pump: Pumptec piston pump, 1.5 GPM
Vacuum Motors: Dual 3-stage
Airflow: 200 CFM
Water Lift: 130 inches
Heater: 1,600 watt REAL HEAT™
Maximum Heated Solution: Up to 210°F
Auto Fill: Included
Automatic Pump-Out: 3.3 GPM
Construction: Roto-molded polyethylene
Rear Wheels: 10" foam-filled
Front Casters: 4" locking
Dimensions: 30" x 20" x 42"
Net Weight: 165 lbs.
Designed for Continuous Professional Cleaning
One of the biggest advantages of the LTD3 is its ability to operate as a more continuous carpet cleaning system. Connect the auto-fill system to a water source and the machine can maintain the solution-tank water level while you work. The automatic pump-out removes recovered wastewater at up to 3.3 gallons per minute .
This reduces the amount of time spent carrying buckets, refilling the solution tank, and manually emptying the recovery tank.
Powerful Heated Cleaning
The adjustable 500 PSI solution pump provides enough pressure for professional carpet extraction while the onboard 1,600-watt heater helps break down oily soils and stubborn contamination with heated cleaning solution up to 210°F.
Dual 3-stage vacuum motors provide 200 CFM airflow and 130 inches of water lift for strong solution recovery and reduced carpet drying time.
Electrical Requirements - Important
The standard 120-volt LTD3 uses two separate 50-foot 12/3 power cords . Each cord can draw up to 20 amps .
For best operation, the two cords should be connected to appropriately rated electrical circuits. Verify available electrical service at the jobsite before operating the machine.
Machine Only
This listing is for the Mytee LTD3 machine only unless an accessory is specifically selected above.
Vacuum/solution hoses, carpet cleaning wand, upholstery tool, auto-fill hookup hose, rotary cleaning tools, and other accessories may be purchased separately using the product options above.
Specifications
Manufacturer
Mytee Products
Model
LTD3 Speedster®
Solution Tank
Approx. 11 gallons
Recovery Tank
Approx. 11 gallons
Vacuum Motors
Dual 3-stage
Airflow
200 CFM
Water Lift
130"
Solution Pump
Pumptec piston pump
Maximum Pressure
500 PSI adjustable
Pump Flow
1.5 GPM
Heater
1,600 watt REAL HEAT™
Maximum Heated Solution
210°F
Auto Fill
Yes
Automatic Pump-Out
3.3 GPM
Power Cords
Dual 50' 12/3
120V Amp Draw
Cord 1: 20 amps / Cord 2: 20 amps
Machine Dimensions
30" x 20" x 42"
Net Weight
165 lbs.
Shipping Weight
180 lbs. excluding pallet
Shipping Dimensions
37-1/4" x 21-1/2" x 50-3/4"
Important Chemical Notice
Mytee advises that acidic solutions, including acid rinses, and highly alkaline solutions such as sodium hydroxide can damage the pump and may void the manufacturer's warranty. Follow Mytee's chemical and maintenance recommendations when operating the machine.
Specifications are subject to manufacturer change without notice. Verify current specifications when required for a particular application.
VIDEO
New Mytee LTD3 Speedster Carpet Cleaning Extractor
This machine has a 500 PSI Pump, Dual 3 Stage Vacuums, and a 1600 Watt Heater capable of 210 Degrees.This Carpet Cleaning Machine has 130" of Lift and 200 CFM and the fact that it has Auto Fill & Auto Dump Means that not only will it pack a punch with its specs on cleaning but allows you to continue cleaning without the trouble of stopping to fill and dump your tanks.
This Item is Machine Only
Speedster® LTD3 Carpet Extractor
Superior performance – Add heat to your cleaning equation with the LTD3’s powerful 1,600 watt heater that breaks apart soil and set-in stains with 210˚ maximum heated solution. Along with its 500 PSI adjustable pump and powerful dual 3-stage vacuum motors, the LTD3 will get you the results you need, job after job.
User-friendly features – Including an auto-fill and auto pump-out, dual external vacuum ports, waist-high switch plate and regulator, waist-high prime valve with an industry-first recovery tank rinse hose, a solution tank drain.
Optional features:
Durability – Sleek new body design made from roto-molded polyethylene, 10” foam-filled, semi-pneumatic wheels and 4” locking casters for safe and easy transport.
Customer Service – Mytee® always offers a limited lifetime warranty and national network of service centers.
The new Speedster® LTD line of extractors will take your cleaning capabilities to the next level with the combination of power, versatility and efficiency. Available in both heated and cold water models, the Speedster® LTD will change the way that you look at portable extractors!
Warranty
90 day to 1 yr parts/ 5 yr pro-rated housing
Body
Roto-molded polyethylene
Tank
12 gallons
Vacuum
Dual 3 stage
CFM
200
H20
130"
General Pump
PSI
Adjustable 500
General Pump GPM
2.2
Pump-out GPM
3.3
Heater
1,600 W - 210 degree maximum
Automation
Auto-fill kit for solution tank, automatic pump-out for recovery tank, Chemical injection
Wheels
10"
Locking Casters
4"
Power Cord
Factory Provided
Dual 50' 12/3
Included
2” Cuff-Lynx™ coupler swivel (2" female x 2" female vac hose) and 2” to 1.5” Cuff-Lynx™ reducer(2" female x 1.5" female), wire hanger for storing hoses and cords, drain elbow, pack of 25 Piglet™ filters
Product Weight
145 lbs
Shipping Weight
185 lbs
Product Dimensions
30" x 20" x 42"
Shipping Dimensions
37 1/4" x 21 1/2" x 50 3/4"
Mytee LTD3 Parts and Schematics
Mytee LTD3 Wire Schematics 115 volt
.
Optional Accessories:
Mytee may make changes in products it manufactures and markets at any time; these changes are made without obligation to change, retrofit, or upgrade any product previously sold or manufactured.