Pumptec Repair Kit A 250psi Plunger & Seals Fixes 112v Pump Heads - 10009 - Repair Parts

Pumptec 10009, KIT-A Plunger and Seals, 112V/114V, GTIN 10679065072443 [10009]

Click to enlarge

Your Price: $53.99
Part Number: 10009
Quantity:
Estimated shipping cost: $ 10.00

Pumptec 10009 KIT-A Plunger & Seal Kit for 112V / 114V Pumps

Pumptec 10009 is a genuine KIT-A plunger and seal repair kit designed for select Pumptec 112V and 114V pump heads. This kit is commonly used when the pump is leaking from the head area, losing pressure, cycling poorly, or no longer building normal pressure.

Fits Pumptec Models

Pumptec 112V
Pumptec 114V

Kit Contents

1 Ground plunger
2 Insulating washers
2 Wave washers
4 V-rings
2 Spreaders
2 Backing ring / guides
1 Clear grease packet

Common Symptoms This Kit May Repair

Pump head leaking water
Low or inconsistent pressure
Pump runs but will not build full pressure
Worn plunger or seal wear inside pump head

Important Ordering Notes

Please confirm your Pumptec pump model before ordering.
This is the KIT-A plunger and seal kit, not the KIT-B valve repair kit.
If your pump has debris in the valves, damaged check valves, or will not prime, you may also need the correct KIT-B valve kit.
For best results, inspect the pump head, valves, and plunger area before reassembly.

Cross Reference

Pumptec 10009
PX10009
GTIN: 10679065072443

Installation Tip

Always lubricate seals with the supplied grease during installation. Do not run the pump dry. After rebuilding, prime the pump before operating under pressure to help prevent premature seal wear.

Plunger & Seal Kit for 114V & 112V Pumptec Pumps.

For Pump Models:
C-112V / W-112V / C-114V / W-114V

Contents of Kit:
1 - Plunger, Ground 112V
2 - Washer, Insulating 0111-0016
2 - Wave Washer
4 - V-Ring Spreader
1 - Teflon Superluve, 1-2 Oz Tube
2 - Backing Ring / Guide (Smooth for 112V)

Compare to current or past OEM associations:
Century 400 250-79E
283251193323
10009
PX10009
10679065072443

Schematics on how these install, click here
.

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Pumptec 10009, KIT-A Plunger and Seals, 112V/114V, GTIN 10679065072443 [10009]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Tuesday 08 April, 2008.

Product Datasheet

Related Items:

Pumptec 80020 112V Pump w/ M72 Motor (50Hz) - 230 Volt - 200 PSI GTIN: N/A (80020)	Pumptec 70111, BRACKET SET, FOR MV520 GTIN: N/A (70111)	Pumptec 80907, Regulator Assy 9025, 80 PSI, W/ bypass Assy, GTIN 10679065072993 (80907)
PumpTec 10004 Kit B Valve and Orings 112 113v 217v 348 356 360 replaces 10010 10012 and 10016 GTIN 10679065070647 (10004)	Pumptec 80931, Regulator Assy, 9025 40 PSI, W/ Bypass Assy, GTIN 10679065072986 (80931)	Pumptec 60023, 114T Pump Head Only, 80555, US Products 56113118, 114-pump-h1141 AP50, Frame 30 GTIN:N/A (60023)
Pumptec 70091, Kit 9018/9019 Regulator Repair, With Stainless Steel Seat GTIN: N/A (70091)	Pumptec 10013 Kit A Plunger & Seal Kit for 348U 350U 357U Pumps GTIN 10679065071330 (10013)	Pumptec 70094, Kit, 9025 Regulator Repair GTIN: N/A (70094)
JE Adams 6684D6, Aqua Breeze Pumptec Series 112V Pump, w/M8235 Motor, 120 Volt 200psi (6684D6)	Pumptec 20171027 200psi 112V Pump w pressure regulator and gauge 120 Volt Kaivac PUMPKZ Sandia Plastic 80005 GTIN: N/A (20171027)	Pumptec 10003, 10055 Kit A 500 psi Plunger and Seals Kit, Repairs 204V, 205V, 207V Pump, 512-555 10679065072009 (10003)

Customers who bought this also bought:

PumpTec Kit B Valve and Orings 348 356 357 360 For H Valves Viton 10016 Now 10004 GTIN: 10679065070647	Gauge 0-6000 Psi W back mount 1/4 in connection 8.710-262.0	HydroForce NA0841, Repair Kit VALVE HF, Check Repairs All Hydroforce Injection Sprayers, 1633-0173 - AS08
Hose Vacuum Hose 25 ft X 1.5in ID with hose cuffs AH38B H294 8.620-198.0 260-038-25 AH38BH 18-225	Foster FK2BH2B, QD 1/4in Male/Female Set, Brass Quick Disconnect, Compatible With Carpet and Tile Cleaning Machines	Steambrite 20230619 Turbo Heat Thermo Retention Hose 25FT 3000Psi Nylon Braid 1/4ID Stainless Steel Couplers Crimps Ball Valve
SOS StainOut System 71-001 SOS Carpet Spot Lift Extractor Tool Wand, GTIN: 865183000106	Pumptec M8235 Motor Only, Esteam 512-510 PMP-M70 (No base), Replaces M70 M9135, Frame30 112VSeries GTIN 686461555047	Pumptec 10031, KIT-A Plunger and Seals, 217V Kaivac PKITA217, GTIN 10679065070999
Mytee H666 Locking Front 5 inch Swivel Caster Kaivac CFS03 NM5720	PMF AC33-3 Wand Glide Lips 3 Inches Stainless Steel	Sandia Plastic Red Heater Rocker Switch With Duct cover 10-0803-H MasterBlend 740211