Pumptec M44 Marathon 1.5 HP Motor Only - 120/230V for 356U / 360U Pumps

Pumptec Part Number: M44

GTIN: 10679065072474

The Pumptec M44 is a heavy-duty Marathon 1-1/2 HP electric motor designed for use with select Pumptec 356U and 360U series high-pressure pump systems.

This dual-voltage motor operates on 120 or 230 VAC and provides the power required for high-pressure Pumptec systems used in professional carpet cleaning, tile and grout cleaning, pressure washing, and other commercial water-pumping applications.

IMPORTANT: This listing is for the MOTOR ONLY. Pump head, cam bearing, regulator, fittings, hoses, and other pump components are NOT included unless specifically stated otherwise.

Pumptec M44 Specifications

Designed for Pumptec 356U and 360U Pump Systems

The M44 is designed to power compatible Pumptec 356U and 360U series pump heads. These pump systems are commonly used where considerably higher solution pressure is required than a conventional carpet extractor pump can provide.

Common applications include:

• Professional carpet cleaning extractors
• Tile and grout cleaning equipment
• Hard-surface cleaning machines
• Pumptec Water Otter style pump systems
• High-pressure portable cleaning equipment
• Commercial water pumping applications

Part Number Cross References

• Pumptec M44
• PT-M44
• 353148318245
• GTIN 10679065072474

Motor Only - Pump Head Not Included

This product is the replacement electric motor only. It does not include a Pumptec 356U or 360U pump head, cam bearing assembly, regulator, pressure switch, hoses, fittings, or complete pump assembly.

If you need a complete Pumptec pump and motor assembly, verify the required pressure, flow rate, voltage, pump head, and cam size before ordering.

Before Ordering

Always verify your existing Pumptec part number, horsepower, voltage, frame size, RPM, mounting arrangement, and pump series before ordering.

Do not order by appearance alone. Manufacturers may use different motors within similar-looking pump assemblies. Display images are for reference, and purchases are fulfilled according to the part number ordered.

Installation Information

The Pumptec M44 is a dual-voltage motor and must be wired correctly for the voltage being supplied. Electrical installation should be performed by a qualified person familiar with the equipment and applicable electrical requirements.

When replacing a failed motor, inspect the pump head and cam bearing assembly before installation. A damaged or binding pump assembly can overload the replacement motor and should be repaired before the equipment is returned to service.

Pumptec M64 Motor Only for AP48 or 356 Pump 120/230 volts 56 Frame PT059

Pumptec M65 Motor AO Smith 8-18754800 - 1-1/2HP 120/230V 1725 rpm 56 Frame (replaces M64)