B630 for only $16.90 - Steambrite's price on the Vee Jet Threaded - B630 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Spraying Systems VeeJet H1/8VV-SS1502 Stainless Steel Nozzle – B630

The Spraying Systems VeeJet H1/8VV-SS1502 is a 1/8-inch male NPT stainless steel flat spray nozzle with a 15-degree spray pattern and 02 capacity size. This style of nozzle is commonly used on professional carpet cleaning, tile and grout, upholstery cleaning, pressure cleaning, and specialty wash tools.

The tapered-edge VeeJet flat spray pattern helps provide uniform coverage and is well suited for cleaning tools where a concentrated, controlled fan spray is required.

Specifications

Common Applications

• Carpet cleaning wands and extraction tools
• Tile and grout cleaning wands
• Upholstery cleaning tools
• Rotary and swivel cleaning tools
• Vent-a-hood and kitchen exhaust cleaning tools
• Equipment washing and pressure spray applications
• Replacement nozzle applications requiring a 1/8-inch male NPT connection

OEM / Cross Reference Numbers

This nozzle has been associated with the following current or historical equipment and distributor part numbers. Always verify the thread size, spray angle and flow requirements of your original nozzle before ordering.

• Spraying Systems: H1/8VV-SS1502
• Steam-Brite: B630
• Redline: H505
• Steel Eagle: 06-200410
• MP-030006-EA
• 250105
• 4-01802015S
• 727878
• 87075360
• 87114610

Understanding the 1502 Nozzle Size

For this VeeJet configuration, the 15 designation identifies the nominal 15-degree spray angle at the rated 40 PSI pressure, while 02 identifies the nozzle capacity size. The manufacturer rates this configuration at approximately 0.20 GPM at 40 PSI.

Spray angle changes somewhat as operating pressure changes. Spraying Systems lists approximately 6° at 20 PSI, 15° at 40 PSI, 22° at 80 PSI and 27° at 200 PSI for this configuration.

Stainless Steel Construction

The H1/8VV-SS1502 is manufactured from 303 stainless steel, providing better corrosion and wear resistance than typical brass spray nozzles. Stainless construction is especially useful in professional cleaning equipment subjected to frequent use, cleaning solutions and repeated installation or removal.

Important: Replacement nozzle selection should be based on the original nozzle's thread size, spray angle and flow capacity. Equipment manufacturers may use similar-looking nozzles with different flow rates or spray patterns.

View Spraying Systems Manufacturer Specifications

Specifications and OEM associations are subject to change without notice. Product images may be representative. Orders are fulfilled according to the part number and configuration ordered.