StainOut T015 Injection Sprayer Plus High Pressure with blow molded jug Freight Included [T-015] with extra Velcro Strap 20220324 [20230324]

Click to enlarge

Your Price: $151.00
Part Number: 20230324
Quantity:
Estimated shipping cost: Free shipping

StainOut Injection Sprayer Plus High Pressure with blow molded jug
Freight Included and 1 extra free velcro strap

Bundle Includes

StainOut T015 Injection Sprayer Plus High Pressure with blow molded jug 1-8 ratio or 1 - 4 ratio [T-015]

Clean Storm Velcro Strap with Buckle G147 - NA0819 - 8.697-099.0 - SA005 G-002

The original injection sprayer (100 - 1,000 PSI).
Finish Jobs Faster with Injection Sprayers.
For those that want an exceptional sprayer at a great price.

Features

Most affordable sprayer on the market
Operating pressure range of 100-1,000 PSI
Eliminates annoying mixing required by pump up sprayers

Specifications

Blow molded, 5 qt. transparent container
7 dilution ratios using metering tip kit NA0816A
Spray gun rated at 2600 PSI and 7 GPM
Chemically-resistant seals
18" stainless steel wand

Parts List
Manual

Video

Video Downloads

How To Clean You Injection Sprayer Filter Video
How to Repair or Rebuild the Injection Sprayer Trigger Valve Video

Compare to current or past OEM associations:

Multi-Sprayer INJ-6
8.697-413.0
86974130
PR101
AS08P
1639-0775
T-015

Additional Information

General Function:

The Injection Sprayer is based upon an injection system that consists of a specially designed valve that injects a concentrated chemical into the high-pressure water flow from the machine. Injection sprayer is designed for use with incoming water pressure of 400 PSI. The water flow is automatically reduced as it passes through the injector valve, thus reducing the pressure approximately 64%. To obtain the actual working pressure of your Injection Sprayer, multiply your incoming pressure by 36%. The Injection Sprayer is factory set to inject chemicals at a 1 to 8 ratio. Other chemicals may be used but should be prepared for a 1 to 8 dilution. The pressure can be increased by putting a smaller jet at the end of the wand. This will, however, decrease the injection rate of your chemical. Your injection ratio may also change depending on the viscosity (thickness) of your chemical concentrate. The 1 to 8 ratio is based upon chemicals with a similar viscosity to water. The injection ratio can also be slightly affected by your main flow water temperature. This is generally not enough of a change to appreciably change the effectiveness of your system. We do, however, recommend the water temperature be kept below 200 degrees Fahrenheit, as higher temperatures can cause problems on the injection.

Pre-Spray and Traffic Lane Applications:

Injection Sprayer eliminates the hassles of measuring and mixing. We recommend you keep an extra 5-quart container or two on your truck to make sure you never run out and to facilitate quick changes of your chemical containers. Remember that Injection Sprayers automatically mixes at a 1 to 8 ratio. If your 5-quart container is full then that is the same as holding an 11-gallon pump sprayer of regular, ready to use pre-spray. We have found that Injection Sprayers offer better penetration and overall coverage than most other sprayers. It is therefore possible to pre-spray your jobs up to 45 minutes before you reach that area to be cleaned. An effective way to use the injection sprayer for pre-conditioning or small to medium jobs is to start at the door coming into the house, spraying all the traffic areas, working your way to the farthest point back in your job. You have then completed your pre-conditioning in just seconds and are prepared to hook up your wand and start cleaning your way out. Keep in that your spraying 3 to 4 times the amount of product your normal pump sprayer is putting out. This means you must move quickly to avoid over-applying. Protector should be applied in even, slightly overlapping strokes.

Steambrite will ship the StainOut T015 Injection Sprayer Plus High Pressure with blow molded jug Freight Included [T-015] with extra Velcro Strap 20220324 [20230324] by either Fedex, UPS, USPS, or Freight Quote, and will normally be shipped within 2-5 business days (if in stock). Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Special order, or custom build items may take up to 30 days.
Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Thursday 24 March, 2022.