Tiny Tach Dtl-6 For Deisel Engines with a 6mm Size Transducer Hour Meter Tachometer - Dtl-6

Tiny Tach DTL-6 For Deisel Engines with a 6mm Size Transducer Hour Meter / Tachometer [DTL-6]

Click to enlarge

Your Price: $194.15
Part Number: DTL-6
Quantity:
Estimated shipping cost: $ 18.00

Diesel Engine Tiny Tach DTL-6 For Diesel Engines with a 6mm Size transducer

Standard Features Include:
Lighted Display.
Flash memory replaces internal battery.
Panel Mountable.
Correct reading regardless of the number of cylinders.
Automatically displays run-time hours when engine is shut off(and power is still on).
A low cost method of keeping track of engine performance.
Engine RPM when engine is running to 19,990.
Requires vehicle power.
Displays RPM when engine is running.
Standard wire length is 8 feet.
Has job timer and 2 service timers.
Accurate means of setting exact engine RPM for proper operation of diesel engines.
Application: Tach meter for Diesel engines with 6mm size transducer

Compare to current or past OEM associations:
DTL-6
DTL6
10-04016
B00L00HDOA

Factory min shipping charge $15

Attach Tiny-Tach unit to desired location. Insure that signal cable will reach area where the transducer is to be mounted on the fuel injection line.
Install Transducer. If there is paint on the injection line, remove by scraping or sand papering a narrow section of line so that the inside diameter of the transducer will make direct metal contact with the fuel line.
Connect Red lead of signal cable to transducer housing (ring terminal under mounting Screw).
Mount transducer on fuel line as shown in Fig.1 . Be sure to use correct transducer size corresponding to injection line size, or damage to the transducer may result when tightened
Tighten socket head cap screws very firmly, using 3/32 inch (2.38mm) hex key.
Ground White lead (with grounding lug) to a good engine ground. Note: Do not attach transducer to a section of fuel line that is bent, curved or flattened. Keep cable away from hot engine parts.
Illustration: How to install a Transducer
External Power: External power is required to operate the unit. Vehicle power is most convenient, but any DC 12 VOLTS source may be used. From the black two wire power cable, connect the RED wire to the POSITIVE of the source and the BLACK wire to the NEGATIVE terminal of the source.
After the transducer pick-up has been installed on the fuel injection line, check to be sure it is not touching any part of the engine except the injection line to which it is attached. After operation is checked out and unit is to be permanently left on engine, it is recommended that the transducer be completely sprayed with paint to insure protection from weather or other contamination.

20181103djc

Steambrite will ship the Tiny Tach DTL-6 For Deisel Engines with a 6mm Size Transducer Hour Meter / Tachometer [DTL-6] by either Fedex, UPS, USPS, or Freight Quote, and will normally be shipped within 2-5 business days (if in stock). Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Special order, or custom build items may take up to 30 days.
Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Saturday 03 November, 2018.

Product Datasheet

DTL-6 for only $194.15 - Steambrite's price on the Meters and Lights - DTL-6 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Diesel Engine Tiny Tach DTL-6 For Diesel Engines with a 6mm Size transducer