TurboForce TH-48HPB TH-40 Replacement Solution Hose – 48 Inch – Female JIC Both Ends
TurboForce Part Number: TH-48HPB
Replace the internal high-pressure solution hose on compatible TurboForce TH-40 Turbo Hybrid hard-surface cleaning tools. This 48-inch replacement hose features a durable stainless-steel braided outer jacket and female JIC swivel-style fittings on both ends.
Important fitting information:
This TH-48HPB version has a female JIC connection on both ends. The fitting may also be described as a 1/4-inch female JIC flare with 7/16-20 threads. Please compare both ends of your existing hose before ordering.
Product Features
- Replacement solution hose for compatible TurboForce TH-40 tools
- Approximately 48 inches long
- Stainless-steel braided protective outer jacket
- Female JIC flare fitting on both ends
- Common fitting description: 1/4-inch female JIC, 7/16-20 thread
- Designed for high-pressure tile and grout cleaning applications
- Sold individually
What You Receive
- One TurboForce TH-48HPB replacement braided solution hose
Compatibility
Designed as a replacement internal pressure hose for compatible versions of the TurboForce TH-40 Turbo Hybrid tile and hard-surface cleaning wand.
TurboForce has produced more than one hose and fitting configuration for the TH-40 over the years. Some versions use a fixed 1/8-inch male pipe fitting on one end, while this TH-48HPB version is intended to have female JIC fittings on both ends.
| Part Number |
End Configuration |
Length |
| TH-48HPB |
Female JIC flare on both ends |
Approximately 48 inches |
| TH-48HP / TH-48HPMF |
1/8-inch male pipe thread on one end and female JIC flare on the other |
Approximately 48 inches |
Please verify before ordering:
Remove or inspect the existing hose and confirm the fitting on both ends. Do not order by hose length alone, because different generations of the TH-40 may use different connection styles.
How to Identify the Correct Hose
- Confirm that the hose is approximately 48 inches long.
- Inspect both hose ends.
- Verify that both ends have female swivel-style JIC flare fittings.
- If one end has fixed male pipe threads, this may not be the correct version.
- When uncertain, email clear photos of both ends of your existing hose before ordering.
Frequently Asked Questions
Does this hose have female fittings on both ends?
Yes. The TH-48HPB is listed as the version with female JIC flare connections on both ends.
Why is the fitting called both 1/4 inch and 7/16 inch?
The 1/4-inch description generally refers to the JIC flare or tube size, while 7/16-20 refers to the fitting thread size. These descriptions may refer to the same fitting.
Will this fit every TurboForce TH-40?
Not necessarily. Different generations of the TH-40 have used different hose-end configurations. Always compare your original hose before ordering.
Is the tool included?
No. This listing is for one replacement solution hose only.
Is the product photograph guaranteed to show the exact fitting configuration?
No. Product photographs may be representative. Orders are fulfilled according to the factory part number and written fitting description.
Specifications, appearance, fittings, and factory part-number applications are subject to change without notice. Installation should be performed only after confirming thread type, flare style, hose routing, and compatibility with the existing tool.
TurboForce TH-48HPB: TH-40 Replacement Solution Hose th40 with 1/4in FJic Both sides
Description
Stainless steel wire braded hose will fit your Turboforce TH40 wand. This hose has has 1/4" FJX connection on both sides. 48" Long
Notes:
Photo is of 1/8" mip X 1/4" FJic swivel and this part number is not this.
Please note there has been different evolutions of this hose. Some of them have fixed 1/8" Mip ends on both sides. Please make sure you let us know which one you need. Thanks.
Options:
.
| 
English
French
Spanish
German
Italian
Portuguese
