

Vacu-Boom C-4 Replacement Connector Clip
Vacu-Boom Part Number: C-4
Product Type: Replacement Connector Clip
Quantity: One Clip
Compatible System: Vacu-Boom VB20-VR1B and Other Compatible Modular Vacu-Boom Systems
Function: Connects Vacu-Boom Sections, End Caps and Center Taps
Vacu-Boom Sections and Fittings: Not Included
THIS LISTING IS FOR ONE VACU-BOOM REPLACEMENT CONNECTOR CLIP ONLY. VACU-BOOM SECTIONS, END CAPS, HOSES, FITTINGS AND THE COMPLETE RECOVERY SYSTEM ARE NOT INCLUDED.
The Vacu-Boom C-4 Replacement Connector Clip secures compatible modular Vacu-Boom components together. Use it to replace a missing, damaged or worn clip on a Vacu-Boom VB20-VR1B wastewater recovery system or another compatible Vacu-Boom configuration.
Vacu-Boom systems are assembled from individual boom sections and specialized fittings. Connector clips hold these components together while allowing the system to be disassembled for transportation, cleaning, storage or reconfiguration.
One Replacement Connector Clip
You will receive:
- One Vacu-Boom C-4 replacement connector clip
The following items are not included:
- Vacu-Boom sections
- End caps
- Center tap
- Square-corner fittings
- Vacuum hose
- Discharge hose
- Recovery vacuum
- Automatic pump-out system
- Complete VB20-VR1B system
What the Connector Clip Does
The C-4 clip is used at the connection point between compatible Vacu-Boom components. Depending on the system configuration, the clip may be used to:
- Join one Vacu-Boom section to another section
- Attach a replacement end cap to a boom section
- Attach a vacuum-hose end cap to a boom section
- Connect a center tap to compatible boom sections
- Replace a lost or damaged original connector clip
- Add sections or fittings when reconfiguring the system
Compatible with Modular Vacu-Boom Systems
This replacement connector clip is intended for compatible modular Vacu-Boom wastewater recovery and spill-containment equipment, including the:
- Vacu-Boom VB20-VR1B 20-foot wastewater recovery system
- Compatible linear/open-ended Vacu-Boom systems
- Compatible closed-loop Vacu-Boom systems
- Compatible Vacu-Boom midsections
- Compatible Vacu-Boom end caps
- Compatible Vacu-Boom center taps
Vacu-Boom equipment has been produced in several sizes and configurations. Compare this clip with the connection hardware on your existing system before ordering.
Installation
- Turn off and disconnect the recovery vacuum.
- Position the two compatible Vacu-Boom components together.
- Align the connection surfaces and clip-retaining areas.
- Install the connector clip over the joint.
- Make sure the clip is fully seated and securely holds both components.
- Connect the vacuum hose and other required equipment.
- Start the recovery vacuum and inspect the joint for movement, air leakage or liquid leakage.
Do not operate the system if the clip is cracked, distorted, excessively worn or unable to hold the connection securely.
Recommended Spare Part
Because Vacu-Boom systems are frequently assembled and disassembled at the job site, connector clips can become misplaced or damaged during transportation, setup or storage.
Keeping one or more spare C-4 connector clips with the recovery system can help prevent a missing clip from delaying a wastewater-recovery job.
Important Ordering Notice
This listing contains one connector clip only. Multiple clips are required to assemble a complete Vacu-Boom system. The number needed depends on the number of boom sections and fittings in the particular configuration.
If you need to connect an end cap, center tap or additional boom section, confirm that you have the fitting and the correct number of connector clips required for the assembly.
If you are uncertain about compatibility, provide Steam-Brite with photographs of the existing clip and connection area before ordering.
Part Number: C-4
Product: Vacu-Boom Replacement Connector Clip
Compatible With: VB20-VR1B and Other Compatible Modular Vacu-Boom Systems
Quantity Supplied: One Clip
Boom Sections and Fittings: Not Included
Complete Recovery System: Not Included
Vacu-Boom 20260903 C-4 Single Connector Clip for VB20-VR1B
|