

Windsor / Karcher NuWave 120V Replacement Vacuum Motor
Part Numbers: 8.622-551.0 | 86225510 | 53817
Replacement 120-volt vacuum motor for Windsor and Karcher NuWave commercial wide-area vacuum cleaners. This 5.7-inch diameter, single-stage tangential-flow vacuum motor is designed to replace the original motor used in compatible NuWave vacuum systems.
Restore the vacuum performance of your commercial cleaning equipment by replacing a worn, damaged, or failed vacuum motor.
Product Specifications
| Specification |
Details |
| Manufacturer |
Windsor / Karcher |
| Current Part Number |
8.622-551.0 |
| Alternate Part Number |
86225510 |
| Previous Part Number |
53817 |
| Voltage |
120 Volts AC |
| Motor Diameter |
5.7 Inches |
| Motor Stages |
Single Stage |
| Motor Configuration |
Tangential Flow / Tangential Bypass |
| Application |
Commercial Wide-Area Vacuum Cleaners |
| Quantity |
1 Vacuum Motor |
Compatible Equipment 
- Windsor NuWave Wide-Area Vacuum Cleaners
- Karcher NuWave Vacuum Systems
- Karcher CV 66/2 - Verify Motor Part Number
- Other equipment specifying Windsor 86225510 or Karcher 8.622-551.0
Replacement and Cross-Reference Part Numbers
- Windsor 86225510
- Windsor 53817
- Karcher 8.622-551.0
- WI86225510
Important: Verify your existing vacuum motor part number before ordering. Motors with similar dimensions may have different electrical specifications, mounting arrangements, or performance characteristics.
NuWave Vacuum Motor Replacement Information
According to the manufacturer's NuWave parts diagram, the 120-volt NuWave vacuum system uses two vacuum motors.
Each motor is sold separately. Order quantity two if replacing both vacuum motors.
The manufacturer identifies this motor as:
Reference 1A - Part Number 86225510 - VAC MOTOR, 120V 5.7 1ST TF
The 230-volt version uses a different motor, part number 86225520 (previous number 53819), and is not interchangeable with this 120-volt motor.
Installation Recommendations
- Disconnect the vacuum cleaner from electrical power before servicing.
- Verify the original motor voltage and part number.
- Inspect the vacuum motor mounting gasket for deterioration or air leaks.
- Inspect electrical connections for overheating or damage.
- Check the vacuum chamber and filters for restrictions.
- Confirm proper airflow after installation.
Related Part: Windsor 86218310 vacuum motor mounting gasket. Check whether replacement gaskets are needed when servicing the vacuum motors.
Manufacturer Parts Documentation
View Karcher NuWave Factory Parts Manual (PDF)
Note: This listing is for one 120-volt replacement vacuum motor. Vacuum cleaner, mounting hardware, and other components are not included unless specifically stated.
|