Clean Storm 20260612 Drain & Sewer Jetter System
4000 PSI • 12 GPM • 35 HP Kohler Gas Engine • 335 Gallon Fresh Water Tank
The Clean Storm 20260612 is a high-output truck-mounted drain and sewer jetter designed for professional drain cleaning, sewer line flushing, pipe maintenance, hydro jetting, and commercial plumbing applications. This skid-mounted cold-water jetter delivers up to 4000 PSI at 12 GPM, giving contractors the flow and pressure needed to clear grease, sludge, sand, roots, scale, and general line blockages.
Built around a 35 HP Kohler gasoline engine, this system includes a direct-drive plunger pump with ceramic plungers, stainless steel valves, pressure gauge, 80-mesh water filter, unloader valve, secondary pop-off protection, and mechanical pump thermal protection. The industrial coated steel skid frame is designed for mounting inside vans, trucks, box trucks, or trailers.
Important: This product cannot ship to California.
Key Features
- 4000 PSI / 276 Bar maximum pressure
- 12 GPM / 45.6 LPM high-flow output
- 35 HP Kohler gasoline engine
- 335 gallon fresh water holding tank
- 400 ft x 1/2 in jetter hose
- 12V DC powered hose reel with free-spool out and power rewind
- Push button or foot switch reel control with 50 ft cord
- Float switch shuts machine down when water tank is empty
- Industrial coated tube and plate steel skid frame
- Mounting flanges allow fastening to truck, van, or trailer deck
Included Accessories
- 4-piece sewer jetter nozzle set
- Tip cleaner
- Tool box
- Safety glasses
- Gloves
- Pressure wash trigger gun and wand
- 50 ft pressure hose
- Backflow preventer
- Tiger tail hose guide
Specifications
| Part Number |
20260612 |
| Pressure |
4000 PSI / 276 Bar |
| Flow Rate |
12 GPM / 45.6 LPM |
| Water Type |
Cold Water |
| Engine |
Kohler Gasoline Engine |
| Horsepower |
35 HP |
| Engine Fuel Tank |
8 Gallons |
| Fresh Water Tank |
335 Gallons |
| Jetter Hose |
400 ft x 1/2 in |
| Hose Reel |
12V DC Powered Reel |
| Mounting Type |
Skid Mount |
| Max Pump Inlet Temperature |
140°F |
| Dimensions |
47 in W x 91 in L x 57 in H |
| Ship Weight |
Approximately 1800 lbs |
Common Applications
- Drain and sewer line cleaning
- Grease removal from commercial lines
- Storm drain flushing
- Pipe descaling and sludge removal
- Municipal and contractor sewer maintenance
- Plumbing service truck or trailer build-outs
Freight and Delivery Notes
This is an oversized freight item. Freight charges shown online are estimates and may vary based on delivery location, liftgate requirements, residential delivery, limited access locations, appointment delivery, or other carrier accessorial charges. Commercial delivery with a forklift or loading dock is recommended.
Inspect shipment before signing the freight delivery receipt. Any visible damage must be noted with the carrier at the time of delivery.
Warranty and Disclaimer
Specifications, included accessories, appearance, and factory supplied components are subject to change without notice. Product photos are for reference only. All purchases are fulfilled by the part number ordered. Warranty is limited to the manufacturer’s warranty terms. Steam Brite, Inc. does not cover labor, downtime, lost revenue, shipping costs, or consequential damages.
Payment by Wire transfer only.
Allow a full month for assembly production before it ships.
All sales final.
Factory supplied parts warranty only and does not include on site labor or shipping cost and excluded freeze damage.
Shipping companies travel insurance only replaces the part and not the entire item if you document any shipping damage. This means you will have to self install any replacement part that a shipping company damages.
| 
English
French
Spanish
German
Italian
Portuguese
