Clean Storm 20131604 15ft Carpet Cleaning Solution Hose - 1/4in ID - 3000 PSI
Clean Storm Part Number: 20131604
Length: 15 Feet
Inside Diameter: 1/4 Inch
Maximum Pressure Rating: 3,000 PSI
End Connections: 1/4 Inch Male Pipe Thread
Construction: Single Wire Braid
Jacket: Durable Non-Marring / Non-Marking
Quick Disconnects: NOT Included
IMPORTANT: THIS IS A 15-FOOT HIGH-PRESSURE SOLUTION HOSE WITH 1/4-INCH MALE PIPE THREAD ENDS. QUICK DISCONNECT COUPLERS ARE NOT INCLUDED AND MUST BE PURCHASED SEPARATELY IF REQUIRED.
The Clean Storm 20131604 carpet cleaning solution hose is a professional high-pressure hose designed for use with portable carpet extractors, truckmount carpet cleaning machines, carpet cleaning wands, upholstery tools, stair tools and compatible hard-surface cleaning equipment.
This hose measures 15 feet long with a 1/4-inch inside diameter and is rated for pressures up to 3,000 PSI. Its single-wire braid construction provides high-pressure capability while helping the hose remain flexible and relatively lightweight for professional cleaning applications.
The exterior features a durable non-marring / non-marking jacket designed for professional carpet and hard-surface cleaning environments where dragging conventional pressure hose across finished flooring can be undesirable.
Clean Storm 20131604 Specifications
| Brand |
Clean Storm |
| Part Number |
20131604 |
| Product Type |
High-Pressure Carpet Cleaning Solution Hose |
| Length |
15 Feet |
| Inside Diameter |
1/4 Inch |
| Maximum Pressure |
3,000 PSI |
| Hose Construction |
Single Wire Braid |
| Hose Jacket |
Non-Marring / Non-Marking |
| End Connections |
1/4 Inch Male Pipe Thread |
| Quick Disconnects Included |
No |
Professional Cleaning Applications
The 20131604 solution hose can be used as a short solution line, equipment-to-hose-reel connection, tool connection, replacement hose, or other compatible high-pressure cleaning connection. Typical applications include:
- Portable carpet cleaning extractors
- Truckmount carpet cleaning machines
- Carpet cleaning wands
- Stair cleaning tools
- Upholstery extraction tools
- Compatible tile and hard-surface cleaning equipment
- Professional hot-water extraction systems
- Replacement solution hose for the Mytee 8070, Powr-Flite PX3, and similar smaller auto detail extractors
Cross-Reference Part Numbers
Always compare hose length, fittings, pressure rating and application before ordering.
- Clean Storm: 20131604
- Karcher / Legacy Reference: 8.918-393.0
- Alternate Reference: 89026520
- Alternate Reference: 89183930
- Mytee Reference: A942
- Simpson: 30156
- Sandia Plastic: 80-8007-A / SP80-8007-A (Includes Qd's)
- EDIC: 1040AC-HP (includes QD's) / 1040AC-HP8
- US Products: FP153 / 41-00507
- Hydramaster: FP199
- Minuteman: 121000 (includes vacuum hose and Qd's)
- NSS: 4098021 / 3891581 / 3890991
- Powr-Flite: PX3D / 1502WDS (includes vacuum hose and Qd's)
Mytee A942 Note: Current Mytee information identifies the A942 as a 1/4-inch solution hose approximately 16 feet long. The Clean Storm 20131604 offered on this page is 15 feet long. A942 is therefore provided as a useful cross-reference/application reference; verify the required hose length and connections before ordering.
Quick Disconnects Are Not Included
This hose is supplied with 1/4-inch male pipe-thread connections. Carpet-cleaning quick disconnect couplers are not included. This allows the customer to install the preferred brass or stainless-steel quick disconnect configuration for the equipment and cleaning tool being used.
Optional compatible quick disconnect components can be ordered separately.
Before Ordering
Please verify the required hose length, 1/4-inch ID, 1/4-inch male pipe-thread connections and 3,000 PSI pressure requirement. Quick disconnect styles can vary between carpet cleaning machines and accessories and are not supplied with this hose unless specifically stated otherwise.
Optional
| 
English
French
Spanish
German
Italian
Portuguese
