Hydroforce 1687-7247, Viper Prestige, Impregnating Sealer, Water Based, 1 Gallon, 174827 [1687-7247]

Click to enlarge

Your Price: Add to cart to see price
Part Number: 1687-7247
Quantity:
Estimated shipping cost: $ 14.00

Hydroforce 1687-7247, Viper Prestige, Impregnating Sealer, Water Based, 1 Gallon, 174827

Description

VIper Prestige is a water-based impregnating sealer that slows down the penetration of liquid and especially oils, yet water vapor permeable to allow moisture in the substrate to evaporate.

Features

Fluoro-chemical technology provides maximum protection against spots and spills
Protects without affecting slip resistance
Preserves the natural look of stone and can be applied to interior surfaces
Ideal water based sealer for prestigious stones like marble, granite, limestone, and travertine.

Specifications

Appearance: Clear Yellowish Liquid
Odor: None
PH 8
Vapor pressure 17.5
Flash Point > 94 °C / > 201 °FBoiling point/boiling range > 100 °C / > 212° F

Directions

SHAKE THOROUGHLY BEFORE EACH USE!

Test for suitability in an inconspicuous area, especially for polished marble and extremely porous surfaces. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes. Sealer may be applied to damp surfaces one hour after standing water has been removed. Surface temperature should be between 50°F and 80°F. Mask any surfaces not intended to be treated.

Cleaning Is Necessary

Surface must be cleaned and thoroughly rinsed to neutralize pH and remove residues. Dry stone enables the best penetration into the surface of stone. Make sure that there are no puddles in grout lines and use air movers to speed the drying of the stone and grout lines before application.

Dilution Instructions

Do not dilute. The product is ready to use. Coverage should be between 300 and 1200 sq. ft. per gallon depending on the porosity of the surfaces and the coverage required.

Application Methods

Stone Application
For entire floor application, spray on sealer using sprayer maintaining 35 to 50 psi with an 2004 TeeJet nozzle. Spread evenly with a brush with synthetic fibers. An alternative and sometimes preferred application method is to liberally apply an even coat using a paint pad, roller or brush. Allow sealer to penetrate the surface for 15–30 minutes. During this time, distribute sealer over entire area to ensure even penetration. Stone density will vary over the same stone
so more may be necessary in some areas and less in other areas. Remove excess sealer by wiping entire surface thoroughly with clean, dry towels. A second coat may be necessary after 1 hour. Place drop of water on newly sealed stone and see if it absorbs into grout or stone. If it does absorb readily, then a second coat is necessary.

Post Application Precautions

Floor is typically walkable in 3 to 4 hours, ready for use after 8 to 12 hours, and completely cured in 24 hours. After 6 to 18 months, reapplication may be necessary, depending upon the traffic level, maintenance procedures and the type of surface sealed.

Safety Cautions

Keep out of reach of children

Prior to using this or any cleaning product, make sure employees read and understand the hazard information found on the product label and Material safety data sheet. (MSDS). The label and MSDS will also provide information on handling precautions, protective equipment and first aid instructions which might be appropriate for this product. Product may be harmful if swallowed. Contact physician immediately. For skin or eye contact, flush area with clear water for 15 minutes. For eye contact, consult a physician immediately.

Spec Sheet

MSDS

Label

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Hydroforce 1687-7247, Viper Prestige, Impregnating Sealer, Water Based, 1 Gallon, 174827 [1687-7247]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Friday 27 March, 2026.