Odorcide 210 Cigarette Smoke Ready to Use Spray Master Case (12-32 oz bottles)
Add 2-4 oz of concentrate to 1 gallon of water. Apply directly to surfaces affected by tobacco smoke. It is important to ensure that Odorcide® Cigarette Smoke reaches the odor source at a concentration equal to or greater than the source of the odor. Absorbent cloth materials must be saturated to guarantee the solution reaches the malodor. If possible, allow the items to air dry (fans or dryers can be used to accelerate the process). Repeat, if necessary, to effectively reach the odor source in all areas.
Remove all unattached items such as drapes, rugs, furniture, etc. from the affected area and treat with Odorcide® Cigarette Smoke according to the directions below. Close all windows & doors, cover any sensitive items that can’t be removed and turn on the central heating/air conditioning system. Dilute product per instructions and add to the fogger, carefully following the directions supplied with the unit. Insure all people and pets are out of the area.
• Small Rooms – low setting
• Large Rooms – low or medium setting with fans
• Large Rooms – high setting if not using fans
Fans help force Odorcide® Cigarette Smoke into cracks and crevices where the odor source may be difficult to treat. The length of time fogging depends on the severity of the smoke and the size of the affected area. The concentration can also be varied depending on the severity of the odor.
Dilute 2-4 oz per gallon of water into a trigger sprayer. Lightly spray onto interior surfaces of the vehicle and into the exhaust ports/vents of the heating/air conditioning system. Allow to air dry and use fans if possible. Repeat, if necessary, to eliminate any remaining odor. As with other applications, Odorcide® Cigarette Smoke must reach the odor source at a concentration equal to or greater than the smoke odor source.
All Thornell products are safe for use on any surface. As with any product, follow the label directions. Contains water, proprietary essential oil blend and preservatives.
Keep out of the reach of children. For external use only.
Effectiveness decreased when using with Chlorine solutions. Always spot test for color fastness.
Q: Is it an enzyme?
A: No. Odorcide is not an enzyme. Odorcide uses a chemistry called Zwaademaker Conjugates. This process bonds, absorbs and then counteracts the odor molecules ability to emit a vapor. The result is complete elimination of the odor.
Q: Does it work on cat urine?
A: Yes. Odorcide will eliminate the odors caused by pet urine. Simply identify the source and make sure Odorcide is used in a manner that will ensure contact with the odor molecule.
Q: Can you use it on oriental or wool rugs?
A: Yes. Odorcide is safe for use on rugs and carpets of all kinds. Rugs need to be treated front and back. A dip tank is best if available.
Q: Does it leave a residue?
A: No. Odoricide is a water based product thus no residue is left behind.
Q: Does it attract dirt?
A: No. Odorcide is non-ionic with a neutral Ph thus it does not attract dirt or debris after use.
Q: Will it hurt the finish on my floor?
A: No. Odorcide is a water based product and contains no caustic ingredients that will damage the floor surface.
Q: Do I need to extract it?
A: Once Odorcide is applied its best to leave it until you are certain it has penetrated deeply enough to come in contact with the odor source. As many of the problems areas are on wood or concrete flooring, this process may take a few minutes. Odorcide needs to penetrate both of these hard surfaces to adequately reach the odor molecule. Once you are certain the penetration process is complete, you can extract the excess or you can simply let it air dry. If you are cleaning in addition to deodorizing, you can remove the excess during your cleaning procedures.
Q: What’s in it?
A: The actual formula is proprietary but in general terms Odorcide is made up of a blend of natural ingredients that are safe for use on any surface to include leather chairs and hard wood floors. It is always recommended that you spot test before applications and as with all chemicals please keep them out of children’s reach.