10009 for only $53.99 - Steambrite's price on the Miscellaneous Repair Parts - 10009 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Pumptec 10009 KIT-A Plunger & Seal Kit for 112V / 114V Pumps

Pumptec 10009 is a genuine KIT-A plunger and seal repair kit designed for select Pumptec 112V and 114V pump heads. This kit is commonly used when the pump is leaking from the head area, losing pressure, cycling poorly, or no longer building normal pressure.

Fits Pumptec Models 

• Pumptec 112V
• Pumptec 114V

Kit Contents

• 1 Ground plunger
• 2 Insulating washers
• 2 Wave washers
• 4 V-rings
• 2 Spreaders
• 2 Backing ring / guides
• 1 Clear grease packet

Common Symptoms This Kit May Repair

• Pump head leaking water
• Low or inconsistent pressure
• Pump runs but will not build full pressure
• Worn plunger or seal wear inside pump head

Important Ordering Notes

• Please confirm your Pumptec pump model before ordering.
• This is the KIT-A plunger and seal kit, not the KIT-B valve repair kit.
• If your pump has debris in the valves, damaged check valves, or will not prime, you may also need the correct KIT-B valve kit.
• For best results, inspect the pump head, valves, and plunger area before reassembly.

Cross Reference

• Pumptec 10009
• PX10009
• GTIN: 10679065072443

Installation Tip

Always lubricate seals with the supplied grease during installation. Do not run the pump dry. After rebuilding, prime the pump before operating under pressure to help prevent premature seal wear.