Steambrite Mfg 20 Hp Stainless Truckmount Carpet Cleaning Machine Kohler Engine 36 Tuthill Blower

Steambrite 22 Hp TruckMount Predator Engine Tuthill 3006 (36) Blower Stainless Carpet Cleaning Machine Only w/Tank TM2236 [TM2236]

Click to enlarge

Your Price: $11,725.65
Part Number: TM2236
Quantity:
Estimated shipping cost: $ 727.00

Product Options
Agitation PreScrubbing Equipment:
Air Mover Fan:
Carpet Extractor Starter Kits:
Crevice Tool Option (Floor):
Crevice Tool Option (Hand):
Extended Warranty:
Hoses:
Options:
Pre-Spray System:
Shipping Surcharges:
Van Shelves:
Wand (Carpet Cleaning):
Wand (Hand Tool):
Wand (Stair Tool):
Wand Carpet CLN Rotary Power:

Steambrite 22 Hp Predator Engine Tuthill 3006 (36) Blower Stainless TruckMount Carpet Cleaning Machine Only w/ Freshwater Tank TM2236

#1 Easiest truckmount to service and maintain, PERIOD.
Super simple design
Parts available everywhere without name brand inflation.
100% Stainless Steel Waste 55 gallon Tank.
Full time APO (Automatic Pump Out)
Console
Please allow 6 weeks for the build.

Frame: 50"L x 20"W x 38"H (4 holes / one on each corner for mounting to floor of van or trailer)

Factory Provided
SteamBrite 20 Gallon Truckmount Fresh Water Box Mix Tank 20190517
20 gallon fresh water tank. No pressure pump clutch need for water damage. Bypassed water recirculates back to this extra larger water box to prevent pump seal burn up and or regulator burn up when you set the wand down and never squeeze the trigger. Great for water extraction work too! Includes straps to secure to waste tank side.
Fresh water tank 11w x 15L x 36"h

Factory Installed in Fresh water
Karcher 343026: Hot Water Float Valve, 1in, Hudson - 8.710-036.0 - 150 degrees
Keeps fresh water tank full without overflowing.

55 Gallon Stainless Steel Waste tank 23.5" Diameter with 4 mounting holes to secure to trailer or van.

Includes 10 feet of 2.5" id vacuum hose to connect blower to waste tank.
Hose can be cut based on ultimate equipment / van layout.

Operates up to 350 ft of hoses!
Truckmount can be installed with engine controls to the van side door opening, or with the belts just behind the van two front seats. Your choice. The heater is usually mounted next to the rear van door.

Factory Installed APO.
Flojet Jabsco 11860-0045 Clutch Pump 23 gpm 1inch NPT Inlet 12 VDC Clutch

Factory Installed
Predator 22hp 670cc V-twin 4-stroke Gasoline Engine 20160305
Belt tensioning plate for easy belt changes when needed.

Jumper wire is not included.
Small footprint, Dimensions: 29”Lx22”Wx22”H
Factory Provided 4 gallon diesel fuel tank
Dealer Provided
Hydrotek CPHL5DCH Hot Link 12 volt Diesel Water Heater for Pressure Washing and Carpet Cleaning 47489
Video on Link!

Factory Brochure

Free Dealer Supplied
HydroForce AC10CLEAR Transparent Truckmount Hose Mount Carpet Cleaning Lint Filter HydroFilter Clear INLF23
Video on Link!

Dealer Provided
Male Nipple Plug 3/8 in Stainless Steel Quick Coupler 87071520 QD
The above Hydrotek heater water out

Dealer Provided
Clean Storm Pressure Washer QD to Rust Bleeder to Filtered Insulated Carpet Cleaners QD 20120606 (Female Socket as first Piece)
Used to preflush the heater, to filter the water on the way to the wand, and post cool down the heater when job is complete.
Video on Link!

Factory Installed
FloJet Rule Float 35A Switch Truckmount waste tank shut off switch for Amtex, Chemtex, Scout, Prochem and Hornet Truckmounts
2 units
One used to turn on the APO Clutch - installed 6inches from bottom of tank.
One used to turn off the engine when the tank is full if you are not using the auto dump pump.

Factory Installed
Tuthill 3006-21L2 Competitor Blower (Left Shaft) Drop in replacement for Roots 36 RUI A6L2CV1-A
Videos on Link!
Up to 370 cfm
Up to 15" HG

Factory Installed
Cat Pump, 3cp1140 - 8.702-460.0 - High Temp Seals
Up to 2200 psi and 3.5 gpm
The pump with 9 lives.
Click on the link to read more about this tough pump.

Factory Installed
Stoddard: Truck Mount Silencer- 2.5 inch Male Pipe Ends D33-2.5 Discharge Silencer
Hooks to the exhaust of the vacuum pump to help make it quieter.

Factory installed
Show RPM of engine when running
Displays hours of use when off.
Tiny Tach TT2A Standard Hour Meter Tachometer
Or similar.
Run engine at 2850 RPM in order to run the Vacuum Pump at 3600 RPM.
This also means the engine will last longer as it is NOT to be run at full RPM.

Factory Installed Last Step Chemical Injection
Cat 3650 Chemical Injection Pulse Pump up to 3000 psi

Factory Provided Battery box and battery (or similar)
Strongway Deep Cycle Marine Battery — Group Size 27, 12 Volt, 90 Ah, Sealed Lead Acid 48695
Must be tied to the truckmount engine, the Hydrotek burner, and the van battery positive post.
Secondary jumper wire not included but can be ordered, see below.

Factory Installed
Dwyer 26-003: Visiflow meter without knob [VFA-42] A019 86181170 86181180
Offer exact chemical injection.
Or similar.

Factory Provided
Pressure Pro 12 Volt Plastic Large Battery Box 9065-1
or similar

Factory Installed
Pressure Gauge 3000 Psi Stainless Steel Bottom Mount 8.710-281.0 85.303.000 [87102810]
Mounted on top of water pressure pump.

Factory Installed
1/4 Three Way Brass Ball Valve Panel Mount Ball 3 way 46956 701-4F4F4F-B
3 way ball valve above it is to prime the chemical injection pump but is rarely needed as it will prime automatically.

Factory Installed
Metering Needle Valve, Plastic Handle 8.904-361.0 3500psi 195 degrees [89043610]
4 point grip needle valve gives exact precise measurement of chemical injection.

Factory Installed
Pressure Pro Engine Oil Drain Assembly Hose kit Honda GX630, GX660, GX690 (New Style) AOD016-18 inches Long
or similar

Factory Installed
Plastic Chemical strainer filter with 1/4in. barbed connection 85300050 General Pump YF00
Helps keep dirt out of the last step chemical injection pump.

Factory Installed Dual Belts between engine and vacuum pump
Truckmount BX42.5 V-Belt

Factory Installed
BX37 Belt, 8.715-698.0 - 17370 V3104168 V-73104168
Automatic Pump Out Belt with Extra belt provided as a backup.

Factory Installed on Cat Water Pump
BX40 V-Belt, Bx40 8.710-748.0 - V-2097654 V-4505742

Factory Installed
VB130 Unloader 2300 psi for El Diablo Truckmount Panel Mountable 8.712-739.0 5-3023 CPS19 MV520 [VB130] 715005 Cat Pump 7500s
Allows for full pressure range from 100 psi to 2000 psi with just a turn of the knob.
Factory Brochure

WARNINGS:
Ear protection must be worn.
Gloves must be worn.
Safety glasses must be worn.
Truckmounts exhaust fumes contain certain poisonous chemicals, including carbon monoxide, sulfur dioxide, nitrogen oxides, formaldehyde, benzene and soot, all of which can be detrimental to the human body if consistently inhaled in large quantities. Use in well ventilated areas only.
California prop 65 Warning: Do not eat, taste, or lick your truckmount!
Do not allow the machine to freeze.
During installation, you must use schedule 8, 3/8-16" bolts or stronger. You must use both regular washers as well as large fender washers to prevent the machine from pulling through the floor during a crash.
WARNING: Rotating pulleys!
Do not stick your hand, hair, jewelry, or clothing into rotating pulleys and belts!

Exact parts for the build are subject to change without notice based on availability.

Notice the grey hose is the bypass off the unloader into the waste tank before the chemical is injected at the last. 20 gallon tank keeps the pump cooler and lasting longer.
40" cat pump belt can be easily replaced in the field within 10-20 minutes it is on the outside of the engine pulley.

Grey mounting base is loosened with 4 mounting bolts and 1 adjustable bolt at the end of the frame

SteamBrite Truckmount Warranty

Machine Only Package does not include any tools, cleaning hoses, or reels.
Tuthill Blower Brochure

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Steambrite 22 Hp TruckMount Predator Engine Tuthill 3006 (36) Blower Stainless Carpet Cleaning Machine Only w/Tank TM2236 [TM2236]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Thursday 26 May, 2011.