

Clean Storm 20107809 Cooling Fan Guard Grill 3-1/8in x 3-1/8in (4in Diagonal) Steel Wire for Volcano Heaters & Mytee Portables
Description
The Clean Storm 20107809 Cooling Fan Guard Grill measures 3-1/8" x 3-1/8" (4" diagonal) and provides essential protective shielding for cooling fans on industrial equipment. Designed for high airflow and durability, this heavy-duty steel wire finger guard protects fan blades and internal motor components from debris, accidental impact, and foreign objects without restricting ventilation. Engineered as an OEM replacement for Clean Storm Volcano Heaters and Mytee portable extractors, it delivers long-lasting protection in demanding commercial cleaning and restoration environments.
Features
- Heavy-Duty Steel Construction: Fabricated from durable steel wire with structural ring welds to resist physical impact, vibration, and continuous operational stress.
- Corrosion-Resistant Protective Finish: Plated for resistance against moisture, humidity, and chemical exposure commonly encountered in cleaning and extraction equipment setups.
- Optimal Airflow Efficiency: Concentric wire ring design minimizes air resistance, ensuring maximum heat dissipation and thermal management for cooling fan motors.
- Standardized Mounting Dimensions: Features precision 3-1/8 inch spacing center-to-center with a 4 inch diagonal hole pattern for fast, drop-in replacement.
- OSHA Compliance Safety: Serves as a vital protective barrier to prevent accidental contact with spinning fan blades, enhancing job-site safety.
Applications
- Clean Storm Volcano Heaters: Protects cooling fan assemblies on portable water heating units and inline heat exchangers.
- Mytee Portable Extractors: Direct replacement cooling fan guard for commercial carpet extractors, tile cleaning machines, and detailers.
- Industrial Equipment Ventilation: Compatible with 80mm / 3.125-inch axial cooling fans used in carpet cleaning truckmount electronics, restoration air movers, and power supply enclosures.
Specifications
| Brand |
Clean Storm |
| Part / Model Number |
20107809 |
| Component Type |
Cooling Fan Finger Guard Grill |
| Square Dimensions |
3-1/8 in x 3-1/8 in (80 mm x 80 mm) |
| Diagonal Hole Spacing |
4 in (101.6 mm) center-to-center |
| Material |
Heavy-Duty Steel Wire |
| Finish / Coating |
Nickel-Chrome Plated / Zinc Plated |
| Fan Frame Compatibility |
Standard 80mm Axial Fans |
| Mounting Type |
4-Bolt Screw Mount Pattern |
| Airflow Restriction |
Minimal (< 2%) |
Cross-Reference SKUs
| Clean Storm 20107809 |
| 20107809 |
| CS-20107809 |
| CS20107809 |
| Mytee Fan Guard 80mm |
| 80mm Fan Grill Wire Guard |
Tips and Additional Information
Pre-Installation Inspection: Prior to installation, inspect the fan guard to ensure all wire welds are intact and that the frame is free from bending or distortion that could interfere with fan blade movement.
Installation & Alignment: Align the four mounting holes on the guard directly over the corner mounting holes of your 80mm cooling fan. Fasten using self-tapping hardware or standard machine screws. Do not over-tighten, as excess torque may crack plastic fan housing ears.
Maintenance Practices: Periodically check the fan grill for lint, dust, or carpet fibers that may accumulate over time. Keep the grill clear to maintain optimal thermal management and prevent motor overheating.
Frequently Asked Questions
Q: What size cooling fan does the Clean Storm 20107809 fit?
A: This fan guard is designed for standard 3-1/8 inch by 3-1/8 inch (80mm) square axial cooling fans with a 4-inch diagonal mounting hole pattern.
Q: Is this fan guard compatible with Mytee portable extractors?
A: Yes, it is directly compatible with Mytee extractors and Clean Storm Volcano inline heaters that utilize 80mm cooling fan assemblies.
Q: Does installing this fan guard restrict airflow to the cooling fan?
A: No, the open concentric wire ring geometry is engineered for maximum thermal dissipation and offers less than 2% airflow restriction while providing full finger and debris protection.
Q: Can this guard be mounted on either side of the fan?
A: Yes, the symmetrical flat design allows it to be mounted on either the intake or exhaust face of the fan frame.
Warranty & Safety Information
Manufacturer Warranty: Covered by Clean Storm's standard limited warranty against defects in materials and workmanship under normal operating conditions when properly installed.
Safety Hazards & Void Conditions: Always disconnect power to the equipment prior to inspecting, installing, or servicing fan guards and electrical components. Operating equipment without a proper protective fan guard installed poses a pinch and laceration hazard from spinning fan blades. Warranty is voided if the guard is modified, bent, installed using incorrect fastener sizing that cracks the fan housing, or subjected to extreme chemical damage outside normal operational parameters.
|