

WestPak 20-0001 Brass 1200 PSI Detail Tool Offset Trigger Valve
The WestPak 20-0001 is a brass trigger-operated water control valve designed for professional carpet cleaning, upholstery cleaning, automotive detailing, and spot cleaning hand tools.
This 1200 PSI rated offset valve is used to control pressurized cleaning solution flowing through compatible extractor hand wands and detail tools. It provides convenient trigger-operated water flow control when cleaning upholstery, vehicle interiors, carpet edges, stairs, and other confined areas.
Product Specifications
| Manufacturer |
WestPak USA |
| Part Number |
20-0001 |
| Valve Type |
Detail Tool Offset Trigger Valve |
| Maximum Rated Pressure |
1200 PSI |
| Body Material |
Brass |
| Water Connections |
1/8" Female NPT x 1/8" Female NPT |
| Operation |
Manual Trigger Control |
| Applications |
Carpet Cleaning, Upholstery Cleaning, Auto Detailing and Spot Cleaning Tools |
Replacement Valve Cross-Reference Part Numbers
This valve is listed under several equipment manufacturer and distributor part numbers. Customers searching for replacement trigger valves may encounter the following cross-reference numbers:
- WestPak: 20-0001
- Mytee: B144A
- AW795
- 1684-1809
- 110884
- Tennant: 275-6888
- Powr-Flite: PX19B
- Tornado / CFR: PX19B
Compatibility Notice: Cross-reference numbers are provided to assist with identifying replacement parts. Before ordering, verify the original valve configuration, connection sizes, mounting arrangement, and pressure rating. Equipment manufacturers may use different valves on different production models.
Common Applications
- Automotive interior carpet cleaning detail wands
- Professional upholstery cleaning hand tools
- Portable carpet extractor accessories
- Truckmount carpet cleaning detail tools
- Carpet and upholstery spot cleaning tools
- Stair cleaning and crevice cleaning wands
- Compatible Mytee cleaning equipment
- Compatible Tennant, Powr-Flite, Tornado and CFR equipment
Common Problems with Carpet Cleaning Trigger Valves
Over time, cleaning solution residue, mineral deposits, normal wear, and contamination can interfere with the internal movement of a brass trigger valve.
Common symptoms of a valve requiring service include:
- Water continues spraying after releasing the trigger.
- The spray nozzle drips when the valve should be closed.
- The trigger becomes difficult to depress or release.
- Water leaks around the valve stem or packing nut.
- The valve piston sticks or does not return smoothly.
- The valve no longer shuts off cleaning solution completely.
Maintenance and Troubleshooting
Before replacing the complete valve, inspect the internal packing and valve stem components for contamination, wear, or inadequate lubrication.
Many brass upholstery and detail tool valves contain a packing nut located directly underneath the trigger. This nut provides access to the valve stem packing and sealing components.
- Turn off the cleaning machine and completely relieve water pressure.
- Disconnect the tool from the pressurized solution hose.
- Inspect the valve for external damage, cracks, or evidence of freezing.
- Carefully loosen the brass packing nut underneath the trigger.
- Inspect the accessible valve stem, packing, and sealing components.
- Remove mineral deposits or contamination from serviceable components.
- Apply an appropriate lubricant compatible with the valve seals and cleaning solution.
- Reassemble the valve and verify smooth trigger movement before restoring pressure.
- Reconnect the tool and check for proper water shutoff and external leaks.
Important: Do not overtighten the packing nut. Excessive tightening can restrict valve stem movement and interfere with normal trigger operation.
Valves damaged by freezing, cracked brass housings, or severely damaged internal components may require complete replacement rather than repair.
WestPak 20-0018 Replacement Valve Repair Kit
If your existing WestPak detail tool valve is leaking, sticking, or failing to shut off completely, you may be able to repair it instead of replacing the entire brass valve assembly.
WestPak offers the 20-0018 Detail Tool Valve Repair Kit for servicing compatible offset detail tool valves.
Click Here to Purchase the WestPak 20-0018 Valve Repair Kit - Mytee B141A
The repair kit may be an economical alternative when the valve body is undamaged and the problem is caused by worn or sticking internal components.
Note: Repair kits cannot correct cracked or freeze-damaged brass valve bodies.
Replacing Your Existing Detail Tool Valve
When replacing an existing trigger valve, confirm the inlet and outlet connection sizes before ordering.
This WestPak 20-0001 valve features 1/8" female pipe thread connections on both ends.
Always verify the pressure rating of your cleaning equipment and ensure the replacement valve is suitable for the intended operating pressure.
WestPak 20-0001 provides a replacement option for compatible professional carpet cleaning, upholstery cleaning, and automotive detailing hand tools.
Order your WestPak 20-0001 brass detail tool trigger valve from Steam-Brite.
|