Clean Storm 20130305, Hot Water Auto Fill Hose 6ft x 1/2in ID 90-Degree Sink Adapter

Description

The Clean Storm 20130305 6-foot auto fill hose features a 1/2-inch inner diameter and a space-saving 90-degree female fitting for seamless hot water transfer from indoor sinks to commercial cleaning equipment.

Features

• Heavy-Duty Thermal Construction: Premium EPDM rubber assembly engineered for continuous hot water delivery up to 200°F.
• Space-Saving 90-Degree Swivel Fitting: Female connector allows tight-radius connections in shallow bathroom or utility sinks without hose kinking or flow restriction.
• High-Flow 1/2" Inner Diameter: Delivers optimal water volume compared to standard 3/8" fill lines, accelerating auto-fill system performance.
• Durable Brass Hardware & Crimped Ferrules: Heavy-duty brass barbed fittings secured with precision .925" brass ferrules for leak-free high-pressure stability.
• Dual-Purpose Versatility: Operates effectively as both a high-temperature auto-fill supply line and a high-volume auto-dump discharge hose.

Applications

• Portable Carpet Extractors: Direct connection to portable auto-fill water inlet ports including US Products and major brand extractors.
• Truckmount Cleaning Systems: Reliable source water supply transfer line from commercial faucet connections to truckmount water tanks.
• Pressure Washing & Tile Cleaning: Essential bridge line connecting sink hot water sources to portable pressure washing pumps for hard surface restoration.
• Janitorial & Facility Maintenance: Ideal for high-temp faucet tap connections in cramped commercial rest rooms and janitor closets.

Specifications

Video

Pictures

Made with the following parts

	Air and Water Hose HBD Thermoid Inc ValuFlex (ValueFlex or Texcel) 1/2" ID Per Foot 200psi Red or Black GS GP
	3/4" Male Garden Hose X 1/2" Barbed Brass
	1/2" Mip x 1/2" Barbed Brass 90 Elbow Fitting 32311
	3/4" Female Garden Hose Swivel X 1/2" Fip Brass Adapter
	Brass Ferrule .925 inches X 0.968 inches Long X .025 Gauge Common for 1/2" ID Hose 32580

Cross-Reference SKUs

Tips and Additional Information

Inspect internal rubber garden hose washers prior to attachment to ensure a watertight seal against sink aerator threads or faucet adapters. Hand-tighten the 90-degree female swivel connector onto standard garden hose threads; avoid over-tightening with wrenches to prevent washer distortion or brass thread galling. Note that the 90-degree brass swivel is intended for alignment during installation and non-live positioning during operation—it should not be rotated continuously while under system pressure.

Frequently Asked Questions

Q: Will this hose fit standard indoor bathroom or kitchen faucets?
A: The hose features a standard 3/4" Female Garden Hose Thread (GHT) 90-degree swivel connector. Connecting to a standard sink faucet requires a commercial faucet aerator adapter that steps up standard sink threads to 3/4" male garden hose thread.

Q: Is this hose rated for continuous pressure or live swivel rotation?
A: This hose is rated for up to 200 PSI working pressure (800 PSI burst). The 90-degree swivel connection is non-live and intended for post-installation alignment rather than continuous rotation during operation.

Q: Can I use this hose for chemical discharge or auto-dumping?
A: Yes, the 1/2" ID size and EPDM construction allow this assembly to function reliably as an auto-dump hose for wastewater evacuation as well as a hot water fill line.

Warranty & Safety Information

This product is backed by a standard manufacturer defects warranty against assembly and material failure under normal operating conditions. Warranty coverage is void if the hose is operated beyond the maximum working pressure rating of 200 PSI, subjected to temperatures exceeding 200°F, exposed to incompatible harsh solvents, or subjected to continuous live rotation under high line pressure. Always depressurize supply line before disconnecting fittings to prevent scalding or mechanical stress injuries.