Clean Storm 20161205 Universal Vacuum Booster SBM-Booster (Machine Mount)

Built to order! 2 Week build time!

Description

Carpet cleaners vacuum booster.
Drastically reduces dry time with power wands like the RotoVac 360 as well as all the other RotoVac models that use lots of water

Works with almost every brand extractor including but not limited to:
Mytee, Breeze, Sandia Plastic, Hydroforce, MasterBlend, Century 400 Diamondback, Drieaz, PowerFlite, Prochem, Castex, Intrepid, Nilfisk Multi HSC 585, Prospector, and US Products

For US Products and Nilfisk machines - please let us know because we have to make the unit 1.5" taller!




Universal Vacuum Booster for Carpet and Upholstery Cleaning Machines New easy install vacuum booster adds the performance you always wanted at a reasonable price.
This will get carpet drier and allow you to operate at longer lengths of hose without suction loss.
Fits on any portable that uses a black twist lock or 6" clear screw in lid.  For portables with 6" clear screw in lid, simply remove your clear 6" screw in lid and replace it with this screw in booster.   Portables with the black twist lock lid, this booster includes the replacement outer black ring to convert to a 6" screw in lid.  When converting machines with a black twist and lift lid to screw in lid, we recommend you purchase an additional clear screw in lid (link below.) or simply use butterfly bolts or fender washers to grab the plastic all the way around the lip opening.

Please note that boosters will increase you CFM of you machine an not the max inches of lift.   Booster will increase you "use" inches of lift not your max inches of lift.  Max inches of lift is taken at zero cfm, "use" inches of lift means with 100 feet of hose with a wand lip on the carpet (fabric) that is a leaking air through and around that fabric (not a perfect seal.)  Booster will usually double you maximum hose length for cleaning and decrease your dry times. 
Ear protection recommended if using in the same room as the cleaning.
Learn about boosters in our forum HERE

Specifications

• 11" Height X 10" Diameter.
  
• Rust Free Aluminum Dome. Can be made as low as 8.5" if we mount the protective aluminum cover as low as possible and do not mount a handle
• Stainless Steel Fasteners and Switch.
  
• Amps: 11 Weight: 11 lbs (includes power cord)
  
• 220 volt available for $200 more.
  
• Average amp draw 10.9 Amps @ 120 volts
  
• Max CFM:  104.4
  
• Max Inches of Lift:  136.9"
  
• Vacuum unit rating: 14,292
  
• Max RPM 25,866

Installed or provided parts:

Factory Installed Electro Motor: Model Q6600-090A-MP-26 3 stage, 120V Flat Fan-Vacuum Motor

Free Dealer Provided Extension Power Cord 14-3 X 25 feet Heavy duty Mytee E532 D16614025 SW141 315-05

Factory Installed Clean Storm Panel Mount 15 amp push button resettable breakers PP140624 PP33-900236 PHY018-003

Factory installed 6 inch Waste Tank Lid Universal Vacuum Lid Flat top (this is the base of the system) When converting from Black Twist Lid to screw in lid, be sure to purchase and extra lid so you can continue to use your machine without the booster.

Factory installed Switch Toggle Stainless W/ Spade Connect Single Pole Single Throw Approved for 20 amp 125 volts or 12 amps 250 volts SPST 39008774507

Factory Installed  Add Vacuum Motor Lint Screen Filtration and Gasket to any vacuum motor

Factory Installed Gasket for 5.7" Vacuum Motor 1/8" Thick 5.5" OD X 4" ID 035-207-00

Factory installed Cord Male Pigtail 12-3 13 inches over all length 10-0838

To see your vacuum performance increase, see chart below.

Current Configuration	Current Vacuum Units	With Booster-Vacuum Units	% Improvement
Single 2 Stage	85" X 100 CFM = 8500	85" X 200 CFM = 17000	100%
Single 3 Stage	125" X 100 CFM = 12500	125" X 200 CFM = 25000	100%
Dual 2 Stage In Series	155" X 100 CFM = 15500	125" X 200 CFM = 25000	61%
Dual 2 Stage in Parallel	85" X 200 CFM = 17000	85" X 300 CFM = 25500	50%
Dual 3 Stage in Series	185" X 100 CFM = 18500	125" X 200 CFM = 25000	35%
Dual 3 Stage In Parallel	125" X 200 CFM = 25000	125" X 300 CFM = 37500	50%
Triple 2 Stage In Series	185" X 100 CFM = 18500	125" X 200 CFM = 25000	35%
Triple 2 Stage In Parallel	85" X 300 CFM = 25500	85" X 400 CFM = 34000	33%
Triple 3 Stage In Series	191" X 100 CFM = 19100	125" X 200 CFM = 25000	31%
Triple 3 Stage In Parallel	125" X 300 CFM = 37500	125" X 400 CFM = 50000	33%
Quad 2 Stage Series Pair	165" X 200 CFM = 33000	125" X 300 CFM = 37500	14%

Video

Optional Parts

2" Barbed X 1-1/2" Mip Plastic Connector Converts your 1.5" ported portable to 2" port for using 2" vacuum hose.

Other Styles of vacuum boosters