HydraMaster DM3 HiFlo DriMaster 3 Upholstery Cleaning Tool

The HydraMaster 000-163-220 DM3 HiFlo DriMaster 3 is a professional jetless upholstery cleaning tool designed for use with truckmounts and high-performance portable carpet extractors. Its Hi-Flow Hyper-Velocity cleaning technology applies solution in a thin, controlled fluid stream while the vacuum slot immediately recovers the solution.

Unlike a conventional upholstery wand that sprays solution directly into the fabric, the DriMaster 3 shears the cleaning solution across the surface. This design helps reduce overwetting and residual moisture, lowering the potential for common upholstery-cleaning problems such as bleeding, shrinking, and browning.

Hi-Flow Hyper-Velocity Cleaning Technology 

The DriMaster 3 uses a constant solution flow directed by an injector bar and slotted vacuum-port system. Cleaning solution travels across the fabric in a thin, flat stream rather than being sprayed directly down into the upholstery.

Because the vacuum system recovers solution immediately, most upholstery can be cleaned with less residual moisture. HydraMaster states that most cleaning can be performed without requiring a separate second drying pass.

Designed to Reduce Operator Fatigue

There is no conventional trigger valve that must be continuously squeezed during cleaning. The triggerless design allows the technician to use different hand positions while working, which can reduce hand and wrist fatigue during larger upholstery jobs.

Product Specifications

Easy to Service

The DriMaster 3 was designed with field serviceability in mind. Removing four screws allows the nose cone to be removed for access to the internal cleaning components. Push-to-connect fittings provide access for cleaning and component replacement. If the nose cone becomes cracked, chipped, or damaged, it can be replaced separately, helping extend the useful life of the tool.

HydraMaster Part Number: 000-163-220
Reference Number: AW86

DM3-HiFlo DriMaster 3 Upholstery Tool

• MOLDED GLIDES on the tool lips means a smoother surface with nothing to wear out virtually eliminating any chance of fabric snagging
• The tool is easy to clean out and even easier to service! Just undo four screws and remove the nose cone for complete access. Push to connect fittings between the valve and bar jet allow for cleaning access and easy replacement.
• If nose cone gets dropped, cracked or chipped, just replace the nose cone. This extends the useful life of your tool for long term profitable cleaning.

DriMaster Upholstery Tool

Creating a hyper-velocity fluid steam instead of a spray jet, the DriMaster Upholstery Tool cleans better with no heat loss and less operator fatigue.

The patented DriMaster™ Upholstery Tool is unlike any tool you have ever used. Using new Jetless Cleaning Technology, it has no trigger valve, no spray jet, and never needs a second drying-pass. The solution is under constant flow, trained by the patented injector bar and slotted vacuum port system. The result is a highly effective cleaning tool that works without overwetting or heat loss. Even narrow areas can be cleaned without any overspray.

Cleaning with the DriMaster Upholstery Tool is just plain faster. The high flow – low residual moisture effect of this new technology leaves the fabric cleaner and drier while greatly reducing the chances of damage. Drymaster.

Brandon Johnson - Hydro Carpet Cleaning, LLC - Lebanon, CT
"My HydraMaster upholstery tool (DriMaster tool) arrived and after trying it out, I must say it's the best tool  I've every purchased!!!  Thanks for your great products and customer support!"

"...less stress on my technicans and the quality (which is my number one concern) is second to none."

"This is worth the money. I know I'll be selling more upholstery cleaning now. No overspray, no trigger, no mess!"

“Yes, there are many bypass tools. Give me one with no trigger and no overspray when it’s lifted. I also like the clear slot so you can see what is being extracted. This is a great tool.”

“Love its versatility. Being able to use it right or left-handed, as well as moving your hand up or down the shaft for comfort.”

“The weight is perfect. It is the only upholstery tool that I have been able to work in excess of five hours, without sour hands, wrist, etc”.

“The DriMaster Upholstery Tool is the workhorse in my business. It removes soil better than any other tool I’ve use. “

“You can clean any type of fabric with the DriMaster Upholstery Tool. I own two of them for large upholstery jobs.”

“The DriMaster is the greatest thing since sliced bread as far as I am concerned. I was going to give up upholstery cleaning before I bought mine. It has cut my cleaning time by 25% because I don’t do a dry pass.

“The drying times are excellent. I cleaned a cotton print. Two hours later it was almost dry enough to sit on.”

"I use my DriMaster upholstery tool to clean the fringes. Just insert fringes into vacuum slot and flush with the cleaning solution. Turn the water flow off, and extract. They cleaned up beautiful."

Owners Manual

Optional:

AB08 Horse Hair Brush with Comfort Grip Handle For Upholstery Cleaning