

Clean Storm 20210429, NEMA 14-50P to 14-30R Power Cord Adapter 12in 10-AWG
Description
Clean Storm 20210429 NEMA 14-50P to 14-30R heavy-duty electrical adapter cord safely connects 30A 4-prong equipment to 50A 4-prong outlets. Ideal for Mytee Escape ETM-LX-Plus extractors.
Features
- Heavy-Duty Construction: Built with high-conductivity 10-gauge pure copper wiring for maximum current transfer without thermal overload.
- Weather-Resistant STW Jacket: Flame-retardant, UV-resistant, and water-resistant 10 AWG STW indoor/outdoor thermo-plastic insulation jacket.
- Molded Plug Terminals: Fully molded NEMA 14-50P male and NEMA 14-30R female connectors prevent moisture ingress and strain wear.
- Compact 12-Inch Profile: Provides optimum strain relief and flexibility without excessive cord clutter at the power source.
- Dual Voltage Compatibility: Configured for 120V/240V split-phase power distribution applications up to 30 Amps continuous load.
Applications
- Mytee Escape ETM-LX-Plus Electric Truckmount Extraction Systems.
- Commercial carpet cleaning extractors and high-draw restoration equipment requiring dual 120V/240V power.
- Residential range/oven 50 Amp wall receptacles (NEMA 14-50R) installed in structures built after 1987.
- High-output portable commercial generators (600+ cc engines) fitted with 50 Amp 14-50R power output receptacles, such as Gentron 12000-Watt (459cc) and BE Pressure XStream BE-12000ER (623cc 20Hp).
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20210429 |
| Male Plug Configuration |
NEMA 14-50P (50 Amp, 120/240 Volt, 4-Prong Male) |
| Female Connector Configuration |
NEMA 14-30R (30 Amp, 120/240 Volt, 4-Prong Female) |
| Cable Wire Gauge / Specs |
10 AWG (Gauge), 4-Conductor Pure Copper Wire |
| Cable Jacket Type |
STW Heavy-Duty, Flame-Retardant, Water & UV Resistant |
| Overall Length |
12 Inches (1 Foot) |
| Voltage Rating |
120V / 240V Split-Phase |
| Current Rating |
30 Amps continuous load pass-through |
| Connector Construction |
Fully Molded Heavy-Duty PVC Plugs |
Cross-Reference SKUs
| Clean Storm 20210429 |
| 20210429 |
| NEMA 1450P to 1430R |
| 14-50P 14-30R Adapter |
| Mytee Escape ETM LX Plus Adapter Cord |
| 1450P-1430R-10-4-12IN |
| 120V 240V 50A to 30A Generator Adapter |
Tips and Additional Information
Before plugging into any range outlet or generator receptacle, inspect all plug blades and socket contacts for debris, corrosion, or thermal damage. Ensure fully seated connection at both ends to prevent resistive heating. Note: This adapter allows 30 Amp equipment to draw power from a 50 Amp circuit; verify that your equipment features built-in circuit breaker protection or inline fuses matching its continuous amperage draw. Disconnect power at the main breaker before connecting or disconnecting heavy-load equipment in damp or wet environments.
Frequently Asked Questions
Q: Will this allow me to plug my Mytee Escape ETM-LX-Plus into a standard 50A range receptacle?
A: Yes. This adapter converts a 4-prong 50 Amp NEMA 14-50P male wall/generator outlet to a 4-prong 30 Amp NEMA 14-30R female connection used by carpet extraction units and high-draw equipment.
Q: Is this power adapter rated for outdoor use?
A: Yes. It is built with a 10-gauge STW heavy-duty jacket that is flame-retardant, UV-resistant, and water-resistant for tough job-site conditions.
Q: Can I use this adapter cord with high-output portable generators?
A: Absolutely. It is compatible with portable generators equipped with 50 Amp NEMA 14-50R outlets, including Gentron 12000W and BE Pressure 12000W units.
Warranty & Safety Information
This product is backed by a 1-Year Limited Manufacturer Warranty against defects in materials and workmanship under normal operating conditions. Warranty is voided if the adapter is subjected to loads exceeding its 30 Amp rated threshold, altered, spliced, submerged in liquids, or operated with damaged electrical blades/receptacles. Always ensure proper matching of electrical specs and grounding to prevent thermal overload or electrical shock hazards.
Optional
|