

Legend Brands 108855 Carpet Cleaning Wand Valve Repair Kit
Replacement Valve Repair Kit for Prochem, Windsor, Karcher, and BlueLine Carpet Cleaning Wands
Repair a leaking, dripping, or malfunctioning carpet cleaning wand solution valve with the Legend Brands 108855 valve repair kit. This replacement kit is used in many Prochem, Windsor, and BlueLine carpet cleaning extraction wands equipped with compatible solution control valves.
This repair kit is marketed under several manufacturer and replacement part numbers, making it easier to locate the correct parts for older and newer carpet cleaning equipment.
Manufacturer and Crossover Part Numbers
| Manufacturer / Brand |
Part Number |
| Legend Brands |
108855 |
| Prochem |
66-808169 |
| Prochem / Replacement |
PP66-808169 |
| Windsor |
86186160 |
| Windsor / Karcher |
8.618-616.0 |
| Additional Reference Number |
48.000 |
Compatible Carpet Cleaning Equipment 
This valve repair kit is used in selected carpet cleaning solution valves installed on:
- Prochem carpet cleaning wands
- Windsor carpet extraction wands
- BlueLine truckmount carpet cleaning wands
- Other extraction tools using the same compatible valve assembly
Important: Compatibility is determined by the valve assembly and original repair kit part number, not simply by the brand of carpet cleaning machine. Verify your existing valve or equipment parts diagram before ordering.
What Does This Valve Repair Kit Do?
The repair kit is intended to service worn internal components of compatible carpet cleaning wand solution valves. Depending on the condition of the existing valve, replacement of worn internal components may help correct:
- Water dripping from the spray jets when the trigger is released
- Solution leaking from the valve assembly
- Worn or damaged internal valve seals
- Valve shutoff problems caused by worn serviceable components
Repairing the existing valve may be more economical than replacing the complete solution valve assembly.
Important Information About Kit Contents
Stainless Steel Center Pin Not Guaranteed
The manufacturer has supplied this same repair kit part number in versions both with and without the replacement stainless steel center pin.
Because the manufacturer uses the same part number for these variations, Steam-Brite cannot guarantee that the replacement stainless steel center pin will be included.
Order based on the repair kit part number rather than assuming that every component shown in a reference photograph will be included.
Product Information
- Primary Part Number: 108855
- Product Type: Solution Valve Repair Kit
- Application: Carpet Cleaning Extraction Wand
- Brand References: Legend Brands, Prochem, Windsor, Karcher, BlueLine
- Additional Part Numbers: 66-808169, PP66-808169, 86186160, 8.618-616.0, 48.000, B00R1ZZY1C
- Application: Repair of compatible trigger-operated solution control valves part numbers 61-950496 and PP61-950496
Ordering and Installation Notes
Before servicing the valve, turn off the cleaning equipment, release all solution pressure, and allow heated components to cool completely.
Inspect the existing valve body, trigger mechanism, and internal components for damage. A repair kit may not correct problems caused by a cracked valve housing, damaged valve seat, or other non-serviceable components.
If the original valve assembly is damaged beyond repair, replacement of the complete valve may be necessary.
Sold as one valve repair kit. Product photographs are for reference. Manufacturer specifications and kit contents are subject to change without notice.
Additional Valve Repair Parts
Looking for additional carpet cleaning wand valves, trigger assemblies, or replacement repair kits?
Browse Steam-Brite Carpet Cleaning Valves and Valve Repair Kits
Steam-Brite Inc.
Professional Carpet Cleaning Equipment, Replacement Parts, and Accessories
|